Table of Contents
This is an old revision of the document!
EVO: Body Parts
FUEL TANKS
☚—————– ALSO CHECK OUT THE TANKS IN THE GAS TANK GALLERY ————-—-☛
82-85 Ironhead tanks are the same as 1986 Evo |
Stock Tank Features As Supplied on Different Models | |||||
Petcock is | Mount is Rigid/Grommet | ||||
---|---|---|---|---|---|
Year | Models | TankSize | Rt/Lt/Man/Vac | RrEars Down/UnderSeat | Notes |
86-91 | All | 2.25gal | Right/Man | Rigid - Down | (TwistOn-Cap/61102-83C) |
92 | All | 2.25gal | Right/Man | Rigid - Down | (ScrewIn-Cap/61272-92) |
Option | 3.25gal | Left/Vac | Rigid - Down | (1992 P&A Catalog Option) | |
93-94 | All | 2.25gal | Right/Man | Grommet - Down | |
Option | 3.25gal | Left/Vac | Grommet – Down | (1994 P&A Catalog Option) | |
95 | 883 | 2.25gal | Left/Vac | Grommet - Down | |
1200 | 3.25gal | Left/Vac | Grommet - Down | ||
96 | 883 | 2.25gal | Left/Vac | Grommet - Down | |
1200 | 3.3gal | Left/Vac | Grommet – Down | (w/RoundedBottomEdge) | |
97-98 | All | 3.3gal | Left/Vac | Grommet - Down | Primed part # (61348-03)1) |
99-03 | All | 3.3gal | Left/Vac | Grommet - Down | |
04-06 | Std/L/R | 3.3gal | Left/Vac | Rigid – Under Seat | (883Std&1200R&883L&883R) |
8C/12C | 4.5gal | Left/Vac | Rigid - Under Seat | (883C&1200C) |
Starting in 2007:
- No petcock - Electronic Fuel Pumps implemented on all tanks
- Tanks are rigid mounted because engine is rubber-mounted
- Tanks have rear mount under seat (but different from 04-06)
- All tanks mount the same 2007-17 - These three primed tanks are available:
- 2.1gal Prime 61724-10 «-back to 2010
- 3.3gal Prime 61405-07 «-back to 2007
- 4.5gal Prime 62213-07 «-back to 2007
Stock Tank Sizes As Supplied on Different Models (All Capacities are in Gallons) | ||||||||||||||
2007 | 08 | 09 | 2010 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 2020 | |
883 Standard | 3.3 | 3.3 | 3.3 | |||||||||||
883L Low/Superlow | 3.3 | 3.3 | 3.3 | 3.3 | 4.5 | 4.5 | 4.5 | 4.5 | 4.5 | 4.5 | 4.5 | |||
883C Custom | 4.5 | 4.5 | 4.5 | 4.5 | ||||||||||
883R Roadster | 3.3 | |||||||||||||
883N Iron (Nghtsr?) | 3.3 | 3.3 | 3.3 | 3.3 | 3.3 | 3.3 | 3.3 | 3.3 | 3.3 | |||||
1200N Nightster | 3.3 | 3.3 | 3.3 | 3.3 | 3.3 | 3.3 | ||||||||
1200C Custom | 4.5 | 4.5 | 4.5 | 4.5 | 4.5 | 4.5 | 4.5 | 4.5 | 4.5 | 4.5 | 4.5 | |||
1200L Low | 4.5 | 4.5 | 4.5 | 4.5 | 4.5 | |||||||||
1200T SuperlowT | 4.5 | 4.5 | 4.5 | 4.5 | ||||||||||
1200R Roadster | 3.3 | 4.5 | ||||||||||||
1200X Model 48 | 2.1 | 2.1 | 2.1 | 2.1 | 2.1 | 2.1 | 2.1 | |||||||
1200V Model 72 | 2.1 | 2.1 | 2.1 | 2.1 | 2.1 | 2.1 | ||||||||
XR1200/XR1200X | 3.5 | 3.5 | 3.5 | 3.5 | ||||||||||
1200-Model50-Annv | 3.3 |
Notes
Generally, you can _make_ tanks interchange between '82 to '03 - Mounting holes are at the same place, but some are rigid mount & others rubber grommet mount.
Screw-in Caps from 1992-later are generally interchangeable although some part number variations do exist over the various models and years.
All non-efi use 22mm petcocks.
There are adapters available to replace the EFI pump plate with a flat-plate with a petcock bung. This may allow the use of a tank intended for EFI models to be used on carburetored models. See this XLForum Thread.
Reference Threads
http://xlforum.net/forums/showthread.php?t=1969877
http://xlforum.net/forums/showthread.php?t=652141
Petcock (Fuel Outlet)