Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision Next revision Both sides next revision | ||
|
techtalk:evo:body04 [2019/10/06 23:50] ixl2relax [Throttle Cables] |
techtalk:evo:body04 [2019/11/12 02:25] hippysmack [Clutch Cables] |
||
|---|---|---|---|
| Line 88: | Line 88: | ||
| ====== Clutch Levers ====== | ====== Clutch Levers ====== | ||
| + | 98 clutch lever. \\ | ||
| + | {{:techtalk:evo:body:adjusting_-_removing_clutch_cable_11_by_hippysmack.jpg?direct&300|}} ((photo by Hippysmack)) \\ | ||
| + | |||
| Starting in 2007, the Clutch Lever had a switch implemented to allow it to be monitored. See the [[techtalk:evo:engctl03#clutch_switch|clutch switch function here]]. | Starting in 2007, the Clutch Lever had a switch implemented to allow it to be monitored. See the [[techtalk:evo:engctl03#clutch_switch|clutch switch function here]]. | ||
| Line 99: | Line 102: | ||
| ====== Clutch Cables ====== | ====== Clutch Cables ====== | ||
| + | See also [[techtalk:evo:priclutch01#pics|Clutch Release Adjustment - Why & How]] including pics of adjusting the cable. \\ | ||
| + | |||
| Line 157: | Line 162: | ||
| ===== Adjusting The Throttle & Idle Cables ===== | ===== Adjusting The Throttle & Idle Cables ===== | ||
| + | |||
| + | The concept of adjustment here is to prevent the throttle cable from extra tension when the grip is fully in the WOT position. This is prevented by making sure the grip is at maximum rotation (WOT) before winding the adjuster to make the throttle plate reach the WOT Stop on the carburetor cam. It is important to adjust the cables in the following manner and sequence or your throttle cable may be overstessed every time you go to the WOT position, eventually breaking due to excessive tension. | ||
| Be sure both cable adjusters are fully minimized. Set the front wheel straight ahead. Turn the throttle grip to fully open (WOT) and hold it there (using the throttle lock star wheel - or a helper). Turn the adjuster on the throttle cable, extending the outer sheath so that the throttle cam (pulled by the inner cable) is just touching the carb WOT Stop. Lock the adjuster in place and release the throttle lock at the grip. | Be sure both cable adjusters are fully minimized. Set the front wheel straight ahead. Turn the throttle grip to fully open (WOT) and hold it there (using the throttle lock star wheel - or a helper). Turn the adjuster on the throttle cable, extending the outer sheath so that the throttle cam (pulled by the inner cable) is just touching the carb WOT Stop. Lock the adjuster in place and release the throttle lock at the grip. | ||
