EVO: Body Parts - Sub-05A - Sportsterpedia

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

[[:techtalk:menu|{{  :techtalk:gototechnicalmenu.jpg|}}]]
====== EVO: Body Parts - Sub-05A ======
===== 2009 HD XL 1200C Shift Lever Assembly Modification =====
Article by Zoharo of the XLFORUM ((https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-suspension-frame-forks-handlebars-fuel-tank-oil-tank-fenders/67876-toe-heel-shifter-how-to?t=449652))

|In the picture below are shift side forward controls - shift lever assembly, with after-market foot rest and \\ shifter peg add ons|
|{{techtalk:ref:body:heel_toe_shifter_1_by_zoharo.jpg?direct&600|}}|

|The shifter rod assembly was removed from the shift lever assembly and the shift lever|
|{{techtalk:ref:body:heel_toe_shifter_2_by_zoharo.jpg?direct&600|}}|

|The shift lever assembly has been rotated clockwise 180 degrees|
|{{techtalk:ref:body:heel_toe_shifter_3_by_zoharo.jpg?direct&600|}}|

|The pinch screw was removed from the shift lever. The lever was pulled and rotated clockwise 150º \\ (30º to the left of top center). The shifter rod assembly was adjusted leaving 5/8" of threads exposed \\ at each end|
|{{techtalk:ref:body:heel_toe_shifter_4_by_zoharo.jpg?direct&600|}}|

|Harley shifter connecting rods are 5/16" - 24 thread. You can generally find used shifter parts online like \\ this longer connecting rod.  The Heim Junctions on the Sportster are not as deep as thread lengths on \\ other models, therefore I cut off a 1/2" from each end of an 11" rod to accommodate my placement of \\ the foot shifter|
|{{techtalk:ref:body:heel_toe_shifter_5_by_zoharo.jpg?direct&600|}}|


\\

[[:techtalk:menu|{{:techtalk:gototechnicalmenu.jpg|}}]]

Trace: • 5 • EVO: Body Parts - Sub-05A • EVO: Carburetor, Intake Manifold & Exhaust - Sub-02A • EVO: Body Parts - Sub-01P

Navigation

Search

Toolbox