Differences
This shows you the differences between two versions of the page.
Both sides previous revision Previous revision Next revision | Previous revision Next revision Both sides next revision | ||
techtalk:evo:carb02 [2019/04/28 05:02] ixl2relax [Links About Tuning & Other Notes] |
techtalk:evo:carb02 [2019/05/06 06:49] ixl2relax [Before Tuning - Collect Your Information] |
||
---|---|---|---|
Line 156: | Line 156: | ||
|Fuel Float Valve |(Y/N - Cleaned & Checked, Replaced)| | |Fuel Float Valve |(Y/N - Cleaned & Checked, Replaced)| | ||
- | **TIPS** | + | | **TIP - 883 or 1200** ((Decman of the XLForum - xlforum.net/forums/showpost.php?p=3171730))\\ If you don't know your engine size, check it with a straw - Like this:\\ * Put in 5th gear\\ * Lift rear wheel\\ * Remove spark plugs\\ * Place a long plastic straw, chopstick, etc. in the spark plug hole\\ {{:techtalk:evo:engmech:measure-883-1200.jpg?120|}}\\ * Rotate tire to move cylinder to bottom dead center - lowest straw position\\ * Check cylinder diagonal dimension from far bottom of cylinder to top lip of spark plug hole\\ * 883 bore = 5.5" Diagonally ---- (Actual Bore Dia. is 3.000)\\ * 1200 bore = 5.875" Diagonally - (Actual Bore Dia. is 3.498)\\ The plastic straw is unable to damage the cylinder and unlikely to fall into the cavity...\\ | |
- | If you don't know your engine size, check it with a straw - Like this: | + | |
- | * Put in 5th gear | + | |
- | * Lift rear wheel | + | |
- | * Remove spark plugs | + | |
- | * Place a long plastic straw in the spark plug hole | + | |
- | * Rotate tire to move cylinder to bottom dead center - lowest straw position | + | |
- | * Check cylinder diagonal dimension from far bottom of cylinder to lip of spark plug hole | + | |
- | * 883 bore = 5.5" Diagonally ---- (Actual Bore Dia. is 3.000) | + | |
- | * 1200 bore = 5.875" Diagonally - (Actual Bore Dia. is 3.498) | + | |
- | The plastic straw is unable to damage the cylinder and unlikely to fall into the cavity... | + | |
\\ | \\ | ||
Line 424: | Line 414: | ||
* Post a thread of your own on XLForum.net with your information from above and ask for help in tuning your particular engine/carb combination | * Post a thread of your own on XLForum.net with your information from above and ask for help in tuning your particular engine/carb combination | ||
+ | * **Provide This Info When Asking About Tuning Carb'd Models**: [[http://xlforum.net/forums/showthread.php?t=1924896]] | ||
Sub-Documents | Sub-Documents |