Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revision Both sides next revision
techtalk:evo:carb02 [2019/04/28 05:10]
ixl2relax [Links About Tuning & Other Notes]
techtalk:evo:carb02 [2019/05/06 06:49]
ixl2relax [Before Tuning - Collect Your Information]
Line 156: Line 156:
 |Fuel Float Valve |(Y/N - Cleaned & Checked, Replaced)| |Fuel Float Valve |(Y/N - Cleaned & Checked, Replaced)|
  
-**TIPS** +**TIP - 883 or 1200** ((Decman of the XLForum - xlforum.net/​forums/​showpost.php?​p=3171730))\\ ​If you don't know your engine size, check it with a straw - Like this:\\ * Put in 5th gear\\ * Lift rear wheel\\ * Remove spark plugs\\ * Place a long plastic straw, chopstick, etc. in the spark plug hole\\ {{:​techtalk:​evo:​engmech:​measure-883-1200.jpg?​120|}}\\ ​* Rotate tire to move cylinder to bottom dead center - lowest straw position\\ * Check cylinder diagonal dimension from far bottom of cylinder to top lip of spark plug hole\\ * 883 bore = 5.5" Diagonally ---- (Actual Bore Dia. is 3.000)\\ * 1200 bore = 5.875" Diagonally - (Actual Bore Dia. is 3.498)\\ The plastic straw is unable to damage the cylinder and unlikely to fall into the cavity...\\ |
-  ​If you don't know your engine size, check it with a straw - Like this: +
-  ​* Put in 5th gear +
-  ​* Lift rear wheel +
-  ​* Remove spark plugs +
-  ​* Place a long plastic straw in the spark plug hole +
-  ​* Rotate tire to move cylinder to bottom dead center - lowest straw position +
-  ​* Check cylinder diagonal dimension from far bottom of cylinder to lip of spark plug hole +
-  ​* 883 bore = 5.5" Diagonally ---- (Actual Bore Dia. is 3.000) +
-  ​* 1200 bore = 5.875" Diagonally - (Actual Bore Dia. is 3.498) +
-  ​The plastic straw is unable to damage the cylinder and unlikely to fall into the cavity...+
  
 \\ \\