Differences
This shows you the differences between two versions of the page.
Both sides previous revision Previous revision Next revision | Previous revision Next revision Both sides next revision | ||
techtalk:evo:carb02 [2020/09/18 03:14] ixl2relax [Enrichener Function (Choke)] |
techtalk:evo:carb02 [2020/12/22 06:12] ixl2relax [Check Items Ahead of the Carb] |
||
---|---|---|---|
Line 144: | Line 144: | ||
|Heads Installed |(Stock 883, Stock 1200, Specify Brand/Model)| | |Heads Installed |(Stock 883, Stock 1200, Specify Brand/Model)| | ||
|Cam Installed |(Stock D, Stock W, Specify Brand/Model)| | |Cam Installed |(Stock D, Stock W, Specify Brand/Model)| | ||
- | |Compression Test |( Min120PSI for 883 - Min150PSI for 1200 ) | | + | |Compression Test |( Min120PSI for 883 - Min150PSI for 1200 - 2004+ Min180PSI for 1200 ) | |
| | | | | | | | ||
|Ignition Module |(Stock 883, Stock 1200, Specify Brand/Model#)| | |Ignition Module |(Stock 883, Stock 1200, Specify Brand/Model#)| | ||
Line 188: | Line 188: | ||
==== Check Items Ahead of the Carb ==== | ==== Check Items Ahead of the Carb ==== | ||
+ | * On later models check for DTCs - These codes can indicate problem areas | ||
* Check your vacuum lines for good connection & no cracks | * Check your vacuum lines for good connection & no cracks | ||
* Check your VOES - that it switches with vacuum - later check switching point | * Check your VOES - that it switches with vacuum - later check switching point | ||
+ | * or check your MAP sensor to be sure it is operating correctly | ||
* Check your gas tank for debris - remove & clean if needed | * Check your gas tank for debris - remove & clean if needed | ||
* Check your petcock for leaks (bad diaphragm) - Make sure vacuum petcocks open on vacuum | * Check your petcock for leaks (bad diaphragm) - Make sure vacuum petcocks open on vacuum | ||
Line 488: | Line 490: | ||
==== Other Engine Checks ==== | ==== Other Engine Checks ==== | ||
- | * Check engine compression - Keep record for later comparison - Preferred Minimum 883=120psi - 1200=150psi | + | * Check engine compression - Keep record for later comparison |
+ | * Preferred Minimum: 883=120psi - 1200=150psi - 2004+ 1200=180psi | ||
* Warm up engine - Try a 10-15 minute ride - let engine cool just enough to touch | * Warm up engine - Try a 10-15 minute ride - let engine cool just enough to touch | ||
* Remove Spark Plugs & Air Cleaner - Connect gauge to Front Cylinder | * Remove Spark Plugs & Air Cleaner - Connect gauge to Front Cylinder | ||
Line 519: | Line 522: | ||
\\ | \\ | ||
+ | |||
+ | |||
===== Accelerator Pump and Fuel Float Bowl ===== | ===== Accelerator Pump and Fuel Float Bowl ===== |