Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision Both sides next revision
techtalk:evo:carb02 [2019/05/06 05:29]
ixl2relax [Before Tuning - Collect Your Information]
techtalk:evo:carb02 [2019/05/06 06:49]
ixl2relax [Before Tuning - Collect Your Information]
Line 156: Line 156:
 |Fuel Float Valve |(Y/N - Cleaned & Checked, Replaced)| |Fuel Float Valve |(Y/N - Cleaned & Checked, Replaced)|
  
-**TIP - 883 or 1200** ((Decman of the XLForum - xlforum.net/​forums/​showpost.php?​p=3171730)) +**TIP - 883 or 1200** ((Decman of the XLForum - xlforum.net/​forums/​showpost.php?​p=3171730))\\ If you don't know your engine size, check it with a straw - Like this:\\ * Put in 5th gear\\ * Lift rear wheel\\ * Remove spark plugs\\ * Place a long plastic straw, chopstick, etc. in the spark plug hole\\ {{:​techtalk:​evo:​engmech:​measure-883-1200.jpg?​120|}}\\ ​* Rotate tire to move cylinder to bottom dead center - lowest straw position\\ * Check cylinder diagonal dimension from far bottom of cylinder to top lip of spark plug hole\\ * 883 bore = 5.5" Diagonally ---- (Actual Bore Dia. is 3.000)\\ * 1200 bore = 5.875" Diagonally - (Actual Bore Dia. is 3.498)\\ The plastic straw is unable to damage the cylinder and unlikely to fall into the cavity...\\ |
-  ​If you don't know your engine size, check it with a straw - Like this: +
-  ​* Put in 5th gear +
-  ​* Lift rear wheel +
-  ​* Remove spark plugs +
-  ​* Place a long plastic straw, chopstick, etc. in the spark plug hole +
-  ​* Rotate tire to move cylinder to bottom dead center - lowest straw position +
-  ​* Check cylinder diagonal dimension from far bottom of cylinder to top lip of spark plug hole +
-  ​* 883 bore = 5.5" Diagonally ---- (Actual Bore Dia. is 3.000) +
-  ​* 1200 bore = 5.875" Diagonally - (Actual Bore Dia. is 3.498) +
-  ​The plastic straw is unable to damage the cylinder and unlikely to fall into the cavity...+
  
 \\ \\