This is an old revision of the document!


EVO: Carburetor, Intake Manifold & Exhaust

Intake Manifold

Factory Equipped with Keihin Non-CV Carburetor
Year ModelIntake
Manifold
Flanges Intake Seal (2)Carb
Insulating Spacer
FrontRear
86-8727004-86
sold individually
27009-8627010-8626995-86A27003-86
flange upgrade (Late 1986)insulator upgrade (1988)
27009-86A27010-86A27003-86A
flange upgrade (1989)
27009-86B27010-86B
Factory Equipped with Keihin CV Carburetor
Year ModelIntake
Manifold
Flanges Intake Seal (2)Carb Seal
FrontRear
88-8927004-88
rubber intake
sold individually
27009-86A27010-86A26995-86A
w/ insert (2)
29049-88
worm clamp
flange upgrade (1989)
27009-86B27010-86B
90-0327004-88A
aluminum intake (27004-89)
sold as kit with
intake and carb seals
27009-86A27010-86A26995-86Aring seal
27002-89
04-0627024-04
aluminum intake
sold as kit with
(map,seal,clip & screw)
27009-86A27010-86A26995-86Aring seal
27002-89

90-03 Intake Manifold (27004-88A)

Subdocuments


Sold as a kit with intake and carb seals.

Intake casting part number: (27004-89)Shown with flanges.
Front: (27009-86A) Rear: (27010-86A)

04-06 Intake Manifold

07 and Up Intake Manifold

2007-up (EFI) heads have a wider bolt pattern for the intake flanges. 1)
It's easier to get to the bolts on 07 and up intakes.
All the 2007+ heads have their manifold mating surfaces milled down about 1/16“ as compared with carb type heads.
If you were to try and put the carb type intake manifold on an 07 engine, you'll find it needs to be about 1/8” wider.
If you don't get a wider manifold, there's a good chance you'll have issues with the seals being sucked into the intake ports on decel.

Intake Flanges

Flange part numbers Front: (27009-86A) Rear: (27010-86A)

Seals

90-03 Intake Seals


This website uses cookies for visitor traffic analysis. By using the website, you agree with storing the cookies on your computer.More information