Table of Contents
This is an old revision of the document!
EVO: Carburetor, Intake Manifold & Exhaust
Air Cleaner (AC)
Mounting Bolts
Thread sizes:
86-90: 5/16“x18 1)
91-Up: 1/2”x13
Backing Plate
Here is the OEM ham can without the filter.
The two bolts on either side of it are the breather bolts that go into the heads.
(and where the oil mist comes out).
With the stock configuration, the mist is vented back into the intake.
Backing plate (29367-07A)7) |
1)
ericfx1984 of the XLFORUM http://xlforum.net/forums/showthread.php?p=5745528#post5745528
4)
, 5)
, 6)
photo by Folkie of the XLFORUM http://xlforum.net/forums/showthread.php?p=5756327#post5756327
7)
photo by Hagen of the XLFORUM http://xlforum.net/forums/showthread.php?t=146084&page=11