Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision Next revision Both sides next revision | ||
|
techtalk:evo:elec01 [2019/06/17 18:40] ixl2relax [Grounding is Critical] |
techtalk:evo:elec01 [2019/10/18 16:39] ixl2relax [Wiring Colors - By Function] |
||
|---|---|---|---|
| Line 74: | Line 74: | ||
| For example:((sportsterdoc of the XLFORUM.net)) | For example:((sportsterdoc of the XLFORUM.net)) | ||
| - | |Blue wire was used for regular lighting power| | + | |Blue wire was used throughout for regular lighting power| |
| - | |Yellow wire was used for low beam headlight power| | + | |Yellow wire was used for low beam headlight power from the Hi/Lo Switch| |
| - | |White wire was used for high beam headlight power| | + | |White wire was used for high beam headlight power from the Hi/Lo Switch| |
| - | |Brown wire was used for the right turn signal power| | + | |Brown wire was used for the right turn signal power to the bulbs| |
| - | |Violet wire was used for the left turn signal power| | + | |Violet wire was used for the left turn signal power to the bulbs| |
| - | |Orange or Orange/White was used for Accessory power| | + | |Orange or Orange/White was used throughout for Accessory power| |
| \\ | \\ | ||
| Line 142: | Line 142: | ||
| Be sure your multimeter BLACK Probe is properly grounded to the Battery Negative Post or to the frame. | Be sure your multimeter BLACK Probe is properly grounded to the Battery Negative Post or to the frame. | ||
| + | Also see additional information on batteries [[techtalk:ref:elec03#batteries|in the REF Section]].\\ | ||
| \\ | \\ | ||
