Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision | Next revision Both sides next revision | ||
|
techtalk:evo:elec03c [2021/01/26 10:21] ixl2relax |
techtalk:evo:elec03c [2021/10/27 22:13] ixl2relax |
||
|---|---|---|---|
| Line 4: | Line 4: | ||
| **Wiring of the Headlight Housing Connector** | **Wiring of the Headlight Housing Connector** | ||
| - | The original wiring diagrams do not have Pin# identificaitons. So in this description we will identify pin numbers for the internal connector (mounted to the headlight housing) starting with the Orange wires and looking at the connector from the backside, where the wires are inserted. The two Orange wires are Pin#1 & Pin#4 follwed by the Blue wire as Pin#5, naming them from left to right. The row of wires below that will be numbered Pin#7-12. To be clear, the Pin#1 is Top Left. | + | The original wiring diagrams do not have Pin# identificaitons. So in this description we will identify pin numbers for the internal connector (mounted to the headlight housing) starting with the Orange wires and looking at the connector from the backside, where the wires are inserted. The two Orange wires are Pin#1 & Pin#4 followed by the Blue wire as Pin#5, naming them from left to right. The row of wires below that will be numbered Pin#7-12. To be clear, the Pin#1 is Top Left. |
| Of course, when looking at the backside of the external mating connector (from the wire side), the pin locations will be reversed, as they are counted from right to left. Just to be clear, the Pin#1 on the mating external connector is Top Right. | Of course, when looking at the backside of the external mating connector (from the wire side), the pin locations will be reversed, as they are counted from right to left. Just to be clear, the Pin#1 on the mating external connector is Top Right. | ||
