Differences

This shows you the differences between two versions of the page.

--- techtalk:evo:engmech02 [2019/08/11 04:29]
ixl2relax [Comparing OEM and Andrews Cam Grinds]
+++ techtalk:evo:engmech02 [2019/08/11 18:10]
ixl2relax [Comparing OEM and Andrews Cam Grinds]
@@ Line 30: / Line 30: @@
-Thanks to Maxeffort of the XLForum for the following Degree Wheel Charts of these various cams.((Maxeffort at this post: http://xlforum.net/forums/showthread.php?t=2074322))\\
+Thanks to Maxeffort of the XLForum for the following Flywheel Degree Charts of these various cams.((Maxeffort at this post: http://xlforum.net/forums/showthread.php?t=2074322))
-Note that the measurements are based on the .053 lift specs.
+Note that the measurements are based on the .053 lift specs and that the intake valve opening occurs on one rotation of the flywheel and the exhaust valve opens on the next rotation of the flywheel.
+\\
 {{:techtalk:evo:engmech:camwheel-hdw-218-234-474-maxeffort.jpg?400|}}   {{:techtalk:evo:engmech:camwheel-hdd-223-223-458-maxeffort.jpg?400|}}

Trace: