Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision Both sides next revision
techtalk:evo:engmech09 [2020/01/26 01:39]
ixl2relax ↷ Page name changed from techtalk:evo:susp05 to techtalk:evo:engmech09 		techtalk:evo:engmech09 [2020/08/20 02:22]
ixl2relax [Replacement Rubber Options]
Line 58: Line 58:
  
   * Vance & Hines mounts: \\ Sold and made by Vance & Hines. \\ They will require you to sign a release where you agree they are for racing only, and V&H isn't liable if bad things happen. \\ From XLForum member, Nytstr: ((http://​xlforum.net/​forums/​showthread.php?​t=27701&​page=30)) \\ The bike corners like it's on rails, and the wallowing, suspension taking a '​set'​ is totally gone. It's like a new bike entirely. \\ There is increased vibration, as one would expect. But so far it is not real bad, just a buzz in the seat mainly, and certainly livable for me. \\    * Vance & Hines mounts: \\ Sold and made by Vance & Hines. \\ They will require you to sign a release where you agree they are for racing only, and V&H isn't liable if bad things happen. \\ From XLForum member, Nytstr: ((http://​xlforum.net/​forums/​showthread.php?​t=27701&​page=30)) \\ The bike corners like it's on rails, and the wallowing, suspension taking a '​set'​ is totally gone. It's like a new bike entirely. \\ There is increased vibration, as one would expect. But so far it is not real bad, just a buzz in the seat mainly, and certainly livable for me. \\ 
 +
 +Front Motor Mount Isolator (2 each required):​\\
 +Harley-Davidson 48463-04\\
 +Dennis Kirk 14-0553 -is- Drag Specialties 0933-0054
 +
 +Rear Motor Mount Isolator (2 each required):​\\
 +Harley-Davidson 48492-04\\
 +Dennis Kird 14-0554 -is- Drag Specialties 0933-0055
  
 **Note**: Some advise against hard poly mounts for fear of cracked cases. \\ **Note**: Some advise against hard poly mounts for fear of cracked cases. \\

Trace: