Differences

This shows you the differences between two versions of the page.

--- techtalk:evo:engmech09c [2021/07/28 04:41]
hippysmack [Evo Motor Mount Specs]
+++ techtalk:evo:engmech09c [2021/07/28 07:01] (current)
hippysmack [Evo Motor Mount Specs]
@@ Line 3: / Line 3: @@
 ====== Evo Motor Mount Specs ======
-The 1986-1990 FSM lists no torque specs for the rear mounts or lower front mounts. \\
+The 1986-1991 FSMs list no torque specs for the rear mounts or lower front mounts. \\
 There is only one spec in the 79-85 FSM (rear motor mounting bolt-nut: 16 to 24 ft lbs) and the 86-90 rear mount is the same part from 84-90. \\
 For the rest, there are general "Torque Value" charts in the front of the service manual. ((1986-1990 HD Sportster FSM pg 1-8)) \\
@@ Line 11: / Line 11: @@
 Below is a list of torque values from the different year model FSMs. \\
-^{{techtalk:miscres:instruction_sheet_header_4.png?nolink&820|}}||||||
+^{{techtalk:miscres:instruction_sheet_header_4.png?nolink&820|}}||||||||
-|  Torque Specs in HD Service Manuals  ||||||
+|  **Torque Specs in HD Service Manuals**  ||||||||
-|  1986-1990 Engines  ||||||
+|Point of \\ Torque|SAE|Metric|Year Model|Point of Torque|SAE|Metric|Year Model|
-|Upper Front Mount to Head|25-30 ft-lbs ((1986-1990 HD Sportster FSM pg 3-3))|34-40 Nm|Upper Front Mount to Frame|30-35 ft-lbs ((1986-1990 HD Sportster FSM pg 3-3))|40-47 Nm|
+|Rear Mount \\ Fasteners|16-24 ft-lbs \\ 25-30 ft-lbs|21-33 Nm \\ 34-41 Nm|1985→1990 \\ 1994-2003|Neg Cable Nut \\ to Rear Mount Stud|68-80 in-lbs|7-10 Nm|1994-2003|
-|Top Front Mount to Heads|25-30 ft-lbs ((1986-1990 HD Sportster FSM pg 3-3))|34-40 Nm|Top Front Mount to Frame|30-35 ft-lbs ((1986-1990 HD Sportster FSM pg 3-3))|40-47 Nm|
+|Lower Front Mount \\ to Engine|25-30 ft-lbs|34-41 Nm|1994-2003| Lower Front Mount \\ to Frame|25-30 ft-lbs|34-41 Nm|1994-2003|
+|Upper Front Mount \\ to Head|21-27 ft-lbs \\ 25-30 ft-lbs|28-36 Nm \\ 34-41 Nm|1986-1989 \\ 1990-2003|Upper Front Mount \\ to Frame|30-35 ft-lbs |40-47 Nm|1986-2003|
+|Top Center Mount \\ to Heads|21-27 ft-lbs \\ 25-30 ft-lbs|28-36 Nm \\ 34-41 Nm|1986-1989 \\ 1990-2003|Top Center Mount \\ to Frame|30-35 ft-lbs|41-47 Nm|1986-2003|
 ----
@@ Line 24: / Line 26: @@
 ^{{techtalk:miscres:instruction_sheet_header_4.png?nolink&820|}}||||||||
-|  SAE  Torque Value Chart per Bolt Type  ||||||||
+|  **SAE  Torque Value Chart per Bolt Type**  ||||||||
 |Bolt size|SAE 2 \\ 74,000 psi \\ Low carbon|SAE 5 \\ 120,000 psi \\ Medium carbon \\ heat treat|SAE 7 \\ 133,000 psi \\ Medium carbon \\ alloy|SAE 8 \\ 150,000 psi \\ Medium carbon \\ alloy|Socket head \\ cap screw \\ 160,000 psi \\ High carbon \\ quenched tempered|Socket head \\ set screw \\ 212,000 psi \\ High carbon \\ quenched tempered|Studs|
 |#6|-|-|-|-|-|9 in/lb|Use \\ SAE \\ 2,5 and 8 \\ values \\ when \\ grade \\ is known \\ with nut \\ and \\ sufficient \\ strength|
@@ Line 41: / Line 43: @@
 ^{{techtalk:miscres:instruction_sheet_header_4.png?nolink&820|}}||||||||
-|  Metric  Torque Value Chart per Bolt Type  ||||||||
+|  **Metric  Torque Value Chart per Bolt Type**  ||||||||
 |Bolt size|SAE 2 \\ 5,202 kg/cm² \\ Low carbon|SAE 5 \\ 8,436 kg/cm² \\ Medium carbon \\ heat treat|SAE 7 \\ 9,350 kg/cm² \\ Medium carbon \\ alloy|SAE 8 \\ 10,545 kg/cm² \\ Medium carbon \\ alloy|Socket head \\ cap screw \\ 11,248 kg/cm² \\ High carbon \\ quenched tempered|Socket head \\ set screw \\ 14,902 kg/cm² \\ High carbon \\ quenched tempered|Studs|
 |2|-|-|-|-|-|-|Use \\ SAE \\ 2,5 and 8 \\ values \\ when \\ grade \\ is known \\ with nut \\ and \\ sufficient \\ strength|