Differences
This shows you the differences between two versions of the page.
Both sides previous revision Previous revision Next revision | Previous revision | ||
techtalk:evo:oil04g [2022/10/12 06:38] hippysmack [Pics and Information on 2004-2009 Sportster Oil Tanks] |
techtalk:evo:oil04g [2024/01/05 19:06] hippysmack |
||
---|---|---|---|
Line 5: | Line 5: | ||
….. *[[techtalk:evo:oil04#oil_line_routing|1986-Up Oil Line Routing]] \\ | ….. *[[techtalk:evo:oil04#oil_line_routing|1986-Up Oil Line Routing]] \\ | ||
….. *[[techtalk:evo:elec02m#pics_and_information_on_stock_evo_battery_trays_and_parts|Pics and Information on stock EVO Battery Trays and Parts]] | ….. *[[techtalk:evo:elec02m#pics_and_information_on_stock_evo_battery_trays_and_parts|Pics and Information on stock EVO Battery Trays and Parts]] | ||
- | |||
- | Click on any pic below to enlarge: \\ | ||
**Note: These tanks are prone to leaking and / or bursting**. \\ | **Note: These tanks are prone to leaking and / or bursting**. \\ | ||
Line 12: | Line 10: | ||
\\ | \\ | ||
- | In 2004, the MoCo started using plastic oil tanks. There were two factory installed versions, 04-06 (62888-04 ) and 07-09 (62888-04A). \\ | + | In 2004, the MoCo started using plastic oil tanks. \\ |
- | The 04-09 oil tank versions share the same basic setups as the oil tank and electrical junction box (that is vulnerable to moisture). ((Bone of the XLFORUM http://xlforum.net/forums/showthread.php?t=1587844&highlight=62954-10&page=4)) \\ | + | There were two factory installed versions, 04-06 (62888-04) and 07-09 (62888-04A) for all models except XR1200/XR1200X. \\ |
+ | XR1200 and XR1200X models use tank 2007-2009 tank (62888-08) and 2010-2013 tank (62888-08A). \\ | ||
+ | The 04-09 oil tank versions share the same basic setups as the oil tank and electrical junction box (that is vulnerable to moisture). ((Bone of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-suspension-frame-forks-handlebars-fuel-tank-oil-tank-fenders/146231-ka-boom-oil-tank/page4?t=1587844&highlight=62954-10&page=4)) \\ | ||
The EFI bikes use up more space in the junction box, having an additional relay and more fuses?). \\ | The EFI bikes use up more space in the junction box, having an additional relay and more fuses?). \\ | ||
The 07-09 tank has a less restrictive cavity in the top section than the 04-09 tank to allow more free flowing air back to the cam chest. \\ | The 07-09 tank has a less restrictive cavity in the top section than the 04-09 tank to allow more free flowing air back to the cam chest. \\ | ||
Line 19: | Line 19: | ||
Late 2009, they came out with an upgrade version (62888-04B) with a 10 PSI pressure relief valve in the top of the tank, right side. \\ | Late 2009, they came out with an upgrade version (62888-04B) with a 10 PSI pressure relief valve in the top of the tank, right side. \\ | ||
The -04B tank fits 2004-2009 Sportsters and also has a less restrictive vent tube configuration inside the tank. \\ | The -04B tank fits 2004-2009 Sportsters and also has a less restrictive vent tube configuration inside the tank. \\ | ||
+ | However, the -04B has now been obsoleted as well.. \\ | ||
+ | The 2010-2013 oil tank (62954-10) will fit 2004-2009 models (except XR1200/XR1200X) and it also has the 10psi relief valve. ((Captain Johnny of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/rubber-mount-sportster-motorcycle-talk-2004-2006/205256-oil-tank#post4647082)). \\ | ||
+ | The hose fitting locations changed again so you'll have to reroute the hoses to use this tank on 2004-2009 models. | ||
+ | |||
+ | Click on any pic below to enlarge: \\ | ||
| 2007-2009 Sportster Oil Tank (62888-04A) ((photos by Ebay seller, rileysusedmotorcycleparts, store: [[https://www.ebay.com/str/RileysMotorcycleParts?_trksid=p2047675.l2563|Ebay store link:]] and [[https://www.ebay.com/itm/Harley-Sportster-1200-Low-XL1200L-2007-Oil-Tank-Pan/254870990156?epid=1223284928&hash=item3b577ead4c:g:LKsAAOSw0KJgLSiN|Auction link on date of posting]] )) ||| | | 2007-2009 Sportster Oil Tank (62888-04A) ((photos by Ebay seller, rileysusedmotorcycleparts, store: [[https://www.ebay.com/str/RileysMotorcycleParts?_trksid=p2047675.l2563|Ebay store link:]] and [[https://www.ebay.com/itm/Harley-Sportster-1200-Low-XL1200L-2007-Oil-Tank-Pan/254870990156?epid=1223284928&hash=item3b577ead4c:g:LKsAAOSw0KJgLSiN|Auction link on date of posting]] )) ||| | ||
|{{:techtalk:evo:oil:2007-2009_sportster_oil_tank_62888-04a_pic1_by_americanbikestrippers.jpg?direct&300|}}|{{:techtalk:evo:oil:2007-2009_sportster_oil_tank_62888-04a_pic2_by_americanbikestrippers.jpg?direct&300|}}|{{:techtalk:evo:oil:2007-2009_sportster_oil_tank_62888-04a_pic3_by_americanbikestrippers.jpg?direct&300|}}| | |{{:techtalk:evo:oil:2007-2009_sportster_oil_tank_62888-04a_pic1_by_americanbikestrippers.jpg?direct&300|}}|{{:techtalk:evo:oil:2007-2009_sportster_oil_tank_62888-04a_pic2_by_americanbikestrippers.jpg?direct&300|}}|{{:techtalk:evo:oil:2007-2009_sportster_oil_tank_62888-04a_pic3_by_americanbikestrippers.jpg?direct&300|}}| | ||
- | | 2004-2009 Oil Tank Upgrade (62888-04B) ((photos by npaisnel of the XLFORUM http://xlforum.net/forums/showthread.php?t=74331&page=3)) ||| | + | | 2004-2009 Oil Tank Upgrade (62888-04B) ((photos by npaisnel of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/rubber-mount-sportster-motorcycle-talk-2004-2006/37658-new-oil-tank/page3?t=74331&page=3)) ||| |
|{{:techtalk:evo:oil:04-09_xl_oil_tank_62888-04b_pic1_by_npaisnel.jpg?direct&300|}}|{{:techtalk:evo:oil:04-09_xl_oil_tank_62888-04b_pic2_by_npaisnel.jpg?direct&300|}}|{{:techtalk:evo:oil:04-09_xl_oil_tank_62888-04b_pic3_by_npaisnel.jpg?direct&300|}}| | |{{:techtalk:evo:oil:04-09_xl_oil_tank_62888-04b_pic1_by_npaisnel.jpg?direct&300|}}|{{:techtalk:evo:oil:04-09_xl_oil_tank_62888-04b_pic2_by_npaisnel.jpg?direct&300|}}|{{:techtalk:evo:oil:04-09_xl_oil_tank_62888-04b_pic3_by_npaisnel.jpg?direct&300|}}| | ||
| More Oil Tank (62888-04B) Pics ((photos courtesy of BIKERSNOS.com. [[https://www.ebay.com/str/bikersnos?_trksid=p2047675.m3561.l2563|Link to Ebay Store]] )) ||| | | More Oil Tank (62888-04B) Pics ((photos courtesy of BIKERSNOS.com. [[https://www.ebay.com/str/bikersnos?_trksid=p2047675.m3561.l2563|Link to Ebay Store]] )) ||| | ||
|{{:techtalk:evo:oil:2004-2009_sportster_oil_tank_upgrade_62888-04b_pic1_by_bikersnos.jpg?direct&300|}}|{{:techtalk:evo:oil:2004-2009_sportster_oil_tank_upgrade_62888-04b_pic2_by_bikersnos.jpg?direct&300|}}|{{:techtalk:evo:oil:2004-2009_sportster_oil_tank_upgrade_62888-04b_pic3_by_bikersnos.jpg?direct&300|}}| | |{{:techtalk:evo:oil:2004-2009_sportster_oil_tank_upgrade_62888-04b_pic1_by_bikersnos.jpg?direct&300|}}|{{:techtalk:evo:oil:2004-2009_sportster_oil_tank_upgrade_62888-04b_pic2_by_bikersnos.jpg?direct&300|}}|{{:techtalk:evo:oil:2004-2009_sportster_oil_tank_upgrade_62888-04b_pic3_by_bikersnos.jpg?direct&300|}}| | ||
+ | |||
+ | | 2007 1200C with 2010-2013 Oil Tank ((Pics by Captain Johnny of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/rubber-mount-sportster-motorcycle-talk-2004-2006/205256-oil-tank#post4647082)) ||| | ||
+ | |{{:techtalk:evo:oil:2007_1200c_with_2010-2013_oil_tank_pic1_by_captain_johnny.jpg?direct&300|}}|{{:techtalk:evo:oil:2007_1200c_with_2010-2013_oil_tank_pic2_by_captain_johnny.jpg?direct&300|}}|{{:techtalk:evo:oil:2007_1200c_with_2010-2013_oil_tank_pic3_by_captain_johnny.jpg?direct&300|}}| | ||
====== Oil Cap ====== | ====== Oil Cap ====== | ||
Line 32: | Line 40: | ||
===== 04+ Oil Cap ===== | ===== 04+ Oil Cap ===== | ||
These can be stubborn to turn all the way. You can use a little silicone lube on the O-ring to help it turn without binding. \\ | These can be stubborn to turn all the way. You can use a little silicone lube on the O-ring to help it turn without binding. \\ | ||
- | Also a leather glove for grip helps. ((JohnK of the XLFORUM http://xlforum.net/forums/showthread.php?t=1566307&page=4)) \\ | + | Also a leather glove for grip helps. ((JohnK of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-suspension-frame-forks-handlebars-fuel-tank-oil-tank-fenders/144466-does-your-oil-filler-cap-pop-out-here-s-a-cheap-and-easy-fix/page4?t=1566307&page=4)) \\ |
The threading tabs in the tank are molded in. \\ | The threading tabs in the tank are molded in. \\ | ||
Line 42: | Line 50: | ||
The pics below show the positions of the cap during installation.: | The pics below show the positions of the cap during installation.: | ||
- | |This shows the broader of the 2 locating pegs in the \\ oil tank. ((photo by harley506d of the XLFORUM http://xlforum.net/forums/showthread.php?t=1566307&page=5))|This shows where the gauge is to start with. ((photo by harley506d of the XLFORUM http://xlforum.net/forums/showthread.php?t=1566307&page=5))| | + | |This shows the broader of the 2 locating pegs in the \\ oil tank. ((photo by harley506d of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-suspension-frame-forks-handlebars-fuel-tank-oil-tank-fenders/144466-does-your-oil-filler-cap-pop-out-here-s-a-cheap-and-easy-fix/page5?t=1566307&page=5))|This shows where the gauge is to start with. ((photo by harley506d of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-suspension-frame-forks-handlebars-fuel-tank-oil-tank-fenders/144466-does-your-oil-filler-cap-pop-out-here-s-a-cheap-and-easy-fix/page5?t=1566307&page=5))| |
|{{:techtalk:evo:oil:installing_oil_tank_cap_1_by_harley506d.jpg?direct&300|}}|{{:techtalk:evo:oil:installing_oil_tank_cap_2_by_harley506d.jpg?direct&300|}}| | |{{:techtalk:evo:oil:installing_oil_tank_cap_1_by_harley506d.jpg?direct&300|}}|{{:techtalk:evo:oil:installing_oil_tank_cap_2_by_harley506d.jpg?direct&300|}}| | ||
- | |This shows the point of "first bite". ((photo by harley506d of the XLFORUM http://xlforum.net/forums/showthread.php?t=1566307&page=5))|This shows final location. ((photo by harley506d of the XLFORUM http://xlforum.net/forums/showthread.php?t=1566307&page=5))| | + | |This shows the point of "first bite". ((photo by harley506d of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-suspension-frame-forks-handlebars-fuel-tank-oil-tank-fenders/144466-does-your-oil-filler-cap-pop-out-here-s-a-cheap-and-easy-fix/page5?t=1566307&page=5))|This shows final location. ((photo by harley506d of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-suspension-frame-forks-handlebars-fuel-tank-oil-tank-fenders/144466-does-your-oil-filler-cap-pop-out-here-s-a-cheap-and-easy-fix/page5?t=1566307&page=5))| |
|{{:techtalk:evo:oil:installing_oil_tank_cap_3_by_harley506d.jpg?direct&300|}}|{{:techtalk:evo:oil:installing_oil_tank_cap_4_by_harley506d.jpg?direct&300|}}| | |{{:techtalk:evo:oil:installing_oil_tank_cap_3_by_harley506d.jpg?direct&300|}}|{{:techtalk:evo:oil:installing_oil_tank_cap_4_by_harley506d.jpg?direct&300|}}| | ||
Line 51: | Line 59: | ||
===== 04 Style Oil Cap Repair ===== | ===== 04 Style Oil Cap Repair ===== | ||
- | Article by JohnK of the XLFORUM ((http://xlforum.net/forums/showthread.php?t=1566307)) \\ | + | Article by JohnK of the XLFORUM ((https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-suspension-frame-forks-handlebars-fuel-tank-oil-tank-fenders/144466-does-your-oil-filler-cap-pop-out-here-s-a-cheap-and-easy-fix?t=1566307)) \\ |
If you've noticed your oil cap mysteriously popping up, it could be a broken internal sleeve. \\ | If you've noticed your oil cap mysteriously popping up, it could be a broken internal sleeve. \\ | ||
Line 59: | Line 67: | ||
The black sleeve protruding above the grey body (in the right side arrow in the 1st pic below) may indicate a broken sleeve. \\ | The black sleeve protruding above the grey body (in the right side arrow in the 1st pic below) may indicate a broken sleeve. \\ | ||
- | |The sleeve should be flush around the perimeter as \\ shown by the left side arrow. ((photo by JohnK of the XLFORUM http://xlforum.net/forums/showthread.php?t=1566307))|To disassemble, find the two side square tabs and \\ push each one in, and the mechanism will pop out \\ under spring pressure. ((photo by JohnK of the XLFORUM http://xlforum.net/forums/showthread.php?t=1566307))| This is what you will have, notice the ratchet spring \\ on the side, note how it fits for re-assembly later. ((photo by JohnK of the XLFORUM http://xlforum.net/forums/showthread.php?t=1566307))| | + | |The sleeve should be flush around the perimeter as \\ shown by the left side arrow. ((photo by JohnK of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-suspension-frame-forks-handlebars-fuel-tank-oil-tank-fenders/144466-does-your-oil-filler-cap-pop-out-here-s-a-cheap-and-easy-fix?t=1566307))|To disassemble, find the two side square tabs and \\ push each one in, and the mechanism will pop out \\ under spring pressure. ((photo by JohnK of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-suspension-frame-forks-handlebars-fuel-tank-oil-tank-fenders/144466-does-your-oil-filler-cap-pop-out-here-s-a-cheap-and-easy-fix?t=1566307))| This is what you will have, notice the ratchet spring \\ on the side, note how it fits for re-assembly later. ((photo by JohnK of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-suspension-frame-forks-handlebars-fuel-tank-oil-tank-fenders/144466-does-your-oil-filler-cap-pop-out-here-s-a-cheap-and-easy-fix?t=1566307))| |
|{{:techtalk:evo:oil:oil_cap_repair_1_by_johnk.jpg?direct&300|}}|{{:techtalk:evo:oil:oil_cap_repair_2_by_johnk.jpg?direct&300|}}|{{:techtalk:evo:oil:oil_cap_repair_3_by_johnk.jpg?direct&300|}}| | |{{:techtalk:evo:oil:oil_cap_repair_1_by_johnk.jpg?direct&300|}}|{{:techtalk:evo:oil:oil_cap_repair_2_by_johnk.jpg?direct&300|}}|{{:techtalk:evo:oil:oil_cap_repair_3_by_johnk.jpg?direct&300|}}| | ||
Line 75: | Line 83: | ||
(which adds additional up and down drag every time the mechanism is worked, accelerating the failure) \\ | (which adds additional up and down drag every time the mechanism is worked, accelerating the failure) \\ | ||
- | |The thin connecting material was broken out. ((photo by JohnK of the XLFORUM http://xlforum.net/forums/showthread.php?t=1566307))|Here are all the components, minus the broken out \\ pieces. The sleeve is now in two halves. ((photo by JohnK of the XLFORUM http://xlforum.net/forums/showthread.php?t=1566307))|Note the locking tabs on one half of the sleeve and \\ none on the other. ((photo by JohnK of the XLFORUM http://xlforum.net/forums/showthread.php?t=1566307))| | + | |The thin connecting material was broken out. ((photo by JohnK of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-suspension-frame-forks-handlebars-fuel-tank-oil-tank-fenders/144466-does-your-oil-filler-cap-pop-out-here-s-a-cheap-and-easy-fix?t=1566307))|Here are all the components, minus the broken out \\ pieces. The sleeve is now in two halves. ((photo by JohnK of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-suspension-frame-forks-handlebars-fuel-tank-oil-tank-fenders/144466-does-your-oil-filler-cap-pop-out-here-s-a-cheap-and-easy-fix?t=1566307))|Note the locking tabs on one half of the sleeve and \\ none on the other. ((photo by JohnK of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-suspension-frame-forks-handlebars-fuel-tank-oil-tank-fenders/144466-does-your-oil-filler-cap-pop-out-here-s-a-cheap-and-easy-fix?t=1566307))| |
|{{:techtalk:evo:oil:oil_cap_repair_4_by_johnk.jpg?direct&300|}}|{{:techtalk:evo:oil:oil_cap_repair_5_by_johnk.jpg?direct&300|}}|{{:techtalk:evo:oil:oil_cap_repair_6_by_johnk.jpg?direct&300|}}| | |{{:techtalk:evo:oil:oil_cap_repair_4_by_johnk.jpg?direct&300|}}|{{:techtalk:evo:oil:oil_cap_repair_5_by_johnk.jpg?direct&300|}}|{{:techtalk:evo:oil:oil_cap_repair_6_by_johnk.jpg?direct&300|}}| | ||
Line 83: | Line 91: | ||
The only items required are a small screwdriver to push in the locking tabs, a set screw, an appropriate drill bit and drill. \\ | The only items required are a small screwdriver to push in the locking tabs, a set screw, an appropriate drill bit and drill. \\ | ||
You can find a small flat head screw, countersink the hole and drive the screw head flush for a better-than original look and function. \\ | You can find a small flat head screw, countersink the hole and drive the screw head flush for a better-than original look and function. \\ | ||
- | {{:techtalk:evo:oil:oil_cap_repair_1_by_samjmm.jpg?direct&300|}} ((photo by samjmm of the XLFORUM http://xlforum.net/forums/showthread.php?t=1566307&page=4)) \\ | + | {{:techtalk:evo:oil:oil_cap_repair_1_by_samjmm.jpg?direct&300|}} ((photo by samjmm of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-suspension-frame-forks-handlebars-fuel-tank-oil-tank-fenders/144466-does-your-oil-filler-cap-pop-out-here-s-a-cheap-and-easy-fix/page4?t=1566307&page=4)) \\ |
Below, a brass screw from an electrical lug was used to screw through the grey plastic body and into the black inner sleeve. \\ | Below, a brass screw from an electrical lug was used to screw through the grey plastic body and into the black inner sleeve. \\ | ||
Line 92: | Line 100: | ||
Drive the screw into the plastic, it will cut its own thread (that's why you drill a smaller pre-drill size hole). \\ | Drive the screw into the plastic, it will cut its own thread (that's why you drill a smaller pre-drill size hole). \\ | ||
- | |Finished product. ((photo by JohnK of the XLFORUM http://xlforum.net/forums/showthread.php?t=1566307))|Here's what it looks like from the inside. The spot for this particle drilled hole put the screw partially in the slot, \\ which would have nullified the fix. A smarter choice would have been into one of the lugs as indicated below. ((photos by JohnK of the XLFORUM http://xlforum.net/forums/showthread.php?t=1566307))|| | + | |Finished product. ((photo by JohnK of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-suspension-frame-forks-handlebars-fuel-tank-oil-tank-fenders/144466-does-your-oil-filler-cap-pop-out-here-s-a-cheap-and-easy-fix?t=1566307))|Here's what it looks like from the inside. The spot for this particle drilled hole put the screw partially in the slot, \\ which would have nullified the fix. A smarter choice would have been into one of the lugs as indicated below. ((photos by JohnK of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-suspension-frame-forks-handlebars-fuel-tank-oil-tank-fenders/144466-does-your-oil-filler-cap-pop-out-here-s-a-cheap-and-easy-fix?t=1566307))|| |
|{{:techtalk:evo:oil:oil_cap_repair_7_by_johnk.jpg?direct&300|}}|{{:techtalk:evo:oil:oil_cap_repair_8_by_johnk.jpg?direct&300|}}|{{:techtalk:evo:oil:oil_cap_repair_9_by_johnk.jpg?direct&300|}}| | |{{:techtalk:evo:oil:oil_cap_repair_7_by_johnk.jpg?direct&300|}}|{{:techtalk:evo:oil:oil_cap_repair_8_by_johnk.jpg?direct&300|}}|{{:techtalk:evo:oil:oil_cap_repair_9_by_johnk.jpg?direct&300|}}| | ||
===== 07 Style Oil Cap with Homemade Temperature Gauge ===== | ===== 07 Style Oil Cap with Homemade Temperature Gauge ===== | ||
- | Article by ridinfool of the XLFORUM ((http://xlforum.net/forums/showthread.php?t=887399)) | + | Article by ridinfool of the XLFORUM ((https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/efi-sportster-motorcycle-talk-2007-and-up/102000-fools-homemade-oil-temp-gauge?t=887399)) |
Sometimes you have to be innovative to save some cash. \\ | Sometimes you have to be innovative to save some cash. \\ | ||
This oil temp gauge was devised for about $20 as opposed to the $45 one from the MoCo. \\ | This oil temp gauge was devised for about $20 as opposed to the $45 one from the MoCo. \\ | ||
- | {{:techtalk:evo:oil:07_up_homemade_oil_temp_cap_7_by_ridinfool.jpg?direct&300|}} ((photo by http://xlforum.net/forums/showthread.php?t=887399)) {{:techtalk:evo:oil:07_up_homemade_oil_temp_cap_8_by_ridinfool.jpg?direct&300|}} ((photo by http://xlforum.net/forums/showthread.php?t=887399)) | + | {{:techtalk:evo:oil:07_up_homemade_oil_temp_cap_7_by_ridinfool.jpg?direct&300|}} ((photo by ridinfool of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/efi-sportster-motorcycle-talk-2007-and-up/102000-fools-homemade-oil-temp-gauge?t=887399)) {{:techtalk:evo:oil:07_up_homemade_oil_temp_cap_8_by_ridinfool.jpg?direct&300|}} ((photo by ridinfool of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/efi-sportster-motorcycle-talk-2007-and-up/102000-fools-homemade-oil-temp-gauge?t=887399)) |
Parts & Tools: \\ | Parts & Tools: \\ | ||
Line 111: | Line 119: | ||
Then cut the dipstick off flush with bottom of the cap. \\ | Then cut the dipstick off flush with bottom of the cap. \\ | ||
- | {{:techtalk:evo:oil:07_up_homemade_oil_temp_cap_1_by_ridinfool.jpg?direct&300|}} ((photo by http://xlforum.net/forums/showthread.php?t=887399)) {{:techtalk:evo:oil:07_up_homemade_oil_temp_cap_2_by_ridinfool.jpg?direct&300|}} ((photo by http://xlforum.net/forums/showthread.php?t=887399)) {{:techtalk:evo:oil:07_up_homemade_oil_temp_cap_3_by_ridinfool.jpg?direct&300|}} ((photo by http://xlforum.net/forums/showthread.php?t=887399)) | + | {{:techtalk:evo:oil:07_up_homemade_oil_temp_cap_1_by_ridinfool.jpg?direct&300|}} ((photo by ridinfool https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/efi-sportster-motorcycle-talk-2007-and-up/102000-fools-homemade-oil-temp-gauge?t=887399)) {{:techtalk:evo:oil:07_up_homemade_oil_temp_cap_2_by_ridinfool.jpg?direct&300|}} ((photo by ridinfool of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/efi-sportster-motorcycle-talk-2007-and-up/102000-fools-homemade-oil-temp-gauge?t=887399)) {{:techtalk:evo:oil:07_up_homemade_oil_temp_cap_3_by_ridinfool.jpg?direct&300|}} ((photo by ridinfool of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/efi-sportster-motorcycle-talk-2007-and-up/102000-fools-homemade-oil-temp-gauge?t=887399)) |
Drill a hole just a bit smaller than the thermometer rod through the center so it fits snug. \\ | Drill a hole just a bit smaller than the thermometer rod through the center so it fits snug. \\ | ||
Line 119: | Line 127: | ||
(make sure not to get the JB Weld on the rod itself as it needs to go up and down with the oil cap) \\ | (make sure not to get the JB Weld on the rod itself as it needs to go up and down with the oil cap) \\ | ||
- | {{:techtalk:evo:oil:07_up_homemade_oil_temp_cap_4_by_ridinfool.jpg?direct&300|}} ((photo by http://xlforum.net/forums/showthread.php?t=887399)) {{:techtalk:evo:oil:07_up_homemade_oil_temp_cap_5_by_ridinfool.jpg?direct&300|}} ((photo by http://xlforum.net/forums/showthread.php?t=887399)) {{:techtalk:evo:oil:07_up_homemade_oil_temp_cap_6_by_ridinfool.jpg?direct&300|}} ((photo by http://xlforum.net/forums/showthread.php?t=887399)) | + | {{:techtalk:evo:oil:07_up_homemade_oil_temp_cap_4_by_ridinfool.jpg?direct&300|}} ((photo by ridinfool of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/efi-sportster-motorcycle-talk-2007-and-up/102000-fools-homemade-oil-temp-gauge?t=887399)) {{:techtalk:evo:oil:07_up_homemade_oil_temp_cap_5_by_ridinfool.jpg?direct&300|}} ((photo by ridinfool of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/efi-sportster-motorcycle-talk-2007-and-up/102000-fools-homemade-oil-temp-gauge?t=887399)) {{:techtalk:evo:oil:07_up_homemade_oil_temp_cap_6_by_ridinfool.jpg?direct&300|}} ((photo by ridinfool of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/efi-sportster-motorcycle-talk-2007-and-up/102000-fools-homemade-oil-temp-gauge?t=887399)) |