Differences

This shows you the differences between two versions of the page.

--- techtalk:evo:priclutch01 [2019/11/13 04:46]
ixl2relax [Diaphragm Springs & Clutch Plate Parts]
+++ techtalk:evo:priclutch01 [2019/11/13 04:50]
ixl2relax [Diaphragm Springs & Clutch Plate Parts]
@@ Line 302: / Line 302: @@
   * 37894-02 - 1ea - Stock Judder Spring (beveled)
   * 37896-02 - 1ea - Stock Pressure Plate
+\\
 |  91-up clutch plates and spacing (F-St-F-St-F-St-F-SP-F-St-F-St-F-St-F). ((photos by Hippysmack))  ||
@@ Line 309: / Line 311: @@
 "Beginning in 2004, the 883 models started coming with a lighter clutch spring than the 1200's."((aswracing from http://xlforum.net/forums/showthread.php?t=1953378))\\
-This was to reduce the effort required to pull the clutch lever.
+This was to reduce the effort required to pull the clutch lever. There was also a change in the\\ clutch cable in 2007 to help reduce the clutch lever effort.
 |  Notice the difference in the slots between the Diaphragm Spring fingers of '91-'03 and '04-later springs.\\ On the left is an '01 example and on the right is an '06 example. Both are 883 model springs.((http://xlforum.net/forums/showpost.php?p=4923807&postcount=7 - Graywolf))((http://xlforum.net/forums/showthread.php?t=49915 - CJBurr))  ||

Trace: