Differences

This shows you the differences between two versions of the page.

--- techtalk:evo:priclutch02 [2019/11/14 00:02]
hippysmack [Removing the Primary Drive]
+++ techtalk:evo:priclutch02 [2020/07/07 23:02]
ixl2relax [Primary Drive Design]
@@ Line 12: / Line 12: @@
 \\
+====== Primary Cover Differences ======
+The 1986-1990 cover uses a round primary chain inspection cover with a 'chevy symbol' indentation to unscrew it.\\
+It also used a relatively small clutch adjustment cover, which also used the 'chevy symbol' tool.
+On the 1991-1993 cover, the primary chain inspection cover is also round, but is mounted with two screws.\\
+Likewise, the small clutch adjustment cover is round and mounted by two screws.
+On the 1994-2003 cover, the primary chain inspection cover is still round using two screws to mount it.\\
+But, the clutch adjustment cover is the large Derby Cover (4-bolt) that allowed the Ball&Ramp assembly to be removed without removing the cover.
+With the Rubbermount models, starting in 2004-later, the cover has rectangular primary chain inspection cover, held in place by two screws.\\
+The clutch adjustment cover is the large Derby Cover, but it is mounted with 6 bolts.
+Over the years, the primary covover has been available in different finishes (polished Aluminum, rough Aluminum, Chrome, Black, etc.) with different part numbers for those variations.
+\\
 ====== Primary Chain - Manual Tension Adjustment ======

Trace: