Differences
This shows you the differences between two versions of the page.
Both sides previous revision Previous revision Next revision | Previous revision Next revision Both sides next revision | ||
techtalk:evo:susp01 [2020/10/25 04:04] ixl2relax [Front Fork Info] |
techtalk:evo:susp01 [2021/11/22 09:34] ixl2relax [EVO: Suspension] |
||
---|---|---|---|
Line 2: | Line 2: | ||
====== EVO: Suspension ====== | ====== EVO: Suspension ====== | ||
+ | |||
+ | Check the REFerence Section for additional Suspension information:\\ | ||
+ | [[techtalk:ref:tools010#suspension|Suspension Tools]] | ||
===== Sub-Documents ===== | ===== Sub-Documents ===== | ||
Line 67: | Line 70: | ||
* (Use a JIS screwdriver for JIS screws. JIS screws look like Philips screws with a dot in the center of the head, but the JIS version is a wider blade with different spline angles. Using a Philips screwdriver on a JIS screw will often round out the screw head. However, using a JIS screwdriver on a Philips-head screw may work just fine, since the driver splines fit snugly on the upper, heavier part of the screw head.) | * (Use a JIS screwdriver for JIS screws. JIS screws look like Philips screws with a dot in the center of the head, but the JIS version is a wider blade with different spline angles. Using a Philips screwdriver on a JIS screw will often round out the screw head. However, using a JIS screwdriver on a Philips-head screw may work just fine, since the driver splines fit snugly on the upper, heavier part of the screw head.) | ||
- | 45815-03 - Chrome Fork Slider Drain Screw Kit((Folkie - xlforum.net/forums/showthread.php?t=738626))\\ | + | 45815-03 - Chrome Fork Slider Drain Screw Kit ((Folkie of the XLFORUM xlforum.net/forums/showthread.php?t=738626))\\ |
- | Screw size is M4 (0.7mm) × 6mm - Includes a pair of chrome allen head drain screws and washers - Uses 2.5mm allen key | + | Screw size is M4 (0.7mm) × 6mm - Includes a pair of chrome allen head drain screws and washers - Uses 2.5mm allen key. \\ |
+ | (Try a 3mm allen key first, the chroming takes up some space in the hex slot) \\ | ||
+ | |||
+ | You can also upgrade to socket head (Allen head) bolts to help prevent stripping out heads. \\ | ||
+ | These are stainless steel bought from a hardware store. Size M4 (0.7mm) × 8mm. \\ | ||
+ | {{:techtalk:evo:susp:fork_drain_screw_upgrade_pic1_by_luxblue.jpg?direct&400|}} ((photo by LuxBlue of the XLFORUM http://xlforum.net/forums/showthread.php?t=1056600)) {{:techtalk:evo:susp:fork_drain_screw_upgrade_pic2_by_luxblue.jpg?direct&400|}} ((photo by LuxBlue of the XLFORUM http://xlforum.net/forums/showthread.php?t=1056600)) \\ | ||
\\ | \\ |