Differences
This shows you the differences between two versions of the page.
Both sides previous revision Previous revision | Next revision Both sides next revision | ||
techtalk:evo:susp01 [2019/07/10 19:19] ixl2relax [Fork Oil Drain Screws] |
techtalk:evo:susp01 [2019/07/10 19:19] ixl2relax [Fork Oil Drain Screws] |
||
---|---|---|---|
Line 296: | Line 296: | ||
====== Fork Oil Drain Screws ====== | ====== Fork Oil Drain Screws ====== | ||
- | 45790-80 - Stock JIS-head Drain Screw with Washer (Requires 1 for each fork)\\ | + | 45790-80 - Stock __JIS-head__ Drain Screw with Washer (Requires 1 for each fork)\\ |
* (Starting in 2008, some models do not have fork oil drain screws) | * (Starting in 2008, some models do not have fork oil drain screws) | ||
* (Use a JIS screwdriver for JIS screws. JIS screws look like Philips screws, but the JIS version is a wider blade with different spline angles. Using a Philips screwdriver on a JIS screw will often round out the screw head. However, using a JIS screwdriver on a Philips-head screw may work just fine, since the driver splines fit snugly on the upper, heavier part of the screw head.) | * (Use a JIS screwdriver for JIS screws. JIS screws look like Philips screws, but the JIS version is a wider blade with different spline angles. Using a Philips screwdriver on a JIS screw will often round out the screw head. However, using a JIS screwdriver on a Philips-head screw may work just fine, since the driver splines fit snugly on the upper, heavier part of the screw head.) |