Differences
This shows you the differences between two versions of the page.
Both sides previous revision Previous revision Next revision | Previous revision Next revision Both sides next revision | ||
techtalk:evo:susp01 [2019/07/10 19:22] ixl2relax [Fork Oil Drain Screws] |
techtalk:evo:susp01 [2019/10/31 07:02] ixl2relax |
||
---|---|---|---|
Line 45: | Line 45: | ||
\\ | \\ | ||
+ | |||
+ | The 39mm Fork Caps need a 1-3/8"(1.375") socket or Cap Wrench. A usable equivalent is a 35mm(1.378") size. It's a good idea to wrap masking tape, electrical tape or duct tape (depending on the thickness of the tape) around the chrome cap to protect if from marks. | ||
+ | |||
\\ | \\ | ||
+ | |||
+ | ===== Fork Oil Drain Screws ===== | ||
+ | |||
+ | 45790-80 - Stock __JIS-head__ Drain Screw with Washer (Requires 1 for each fork)\\ | ||
+ | * (Starting in 2008, some models do not have fork oil drain screws) | ||
+ | * (Use a JIS screwdriver for JIS screws. JIS screws look like Philips screws with a dot in the center of the head, but the JIS version is a wider blade with different spline angles. Using a Philips screwdriver on a JIS screw will often round out the screw head. However, using a JIS screwdriver on a Philips-head screw may work just fine, since the driver splines fit snugly on the upper, heavier part of the screw head.) | ||
+ | |||
+ | 45815-03 - Chrome Fork Slider Drain Screw Kit((Folkie - xlforum.net/forums/showthread.php?t=738626))\\ | ||
+ | Screw size is M4 (0.7mm) × 6mm - Includes a pair of chrome allen head drain screws and washers - Uses 2.5mm allen key | ||
+ | |||
+ | |||
+ | \\ | ||
+ | |||
\\ | \\ | ||
Line 292: | Line 308: | ||
|Damper Rod Screw Lt | N/A | 45500236 | N/A | | | |Damper Rod Screw Lt | N/A | 45500236 | N/A | | | ||
- | |||
- | |||
- | ====== Fork Oil Drain Screws ====== | ||
- | |||
- | 45790-80 - Stock __JIS-head__ Drain Screw with Washer (Requires 1 for each fork)\\ | ||
- | * (Starting in 2008, some models do not have fork oil drain screws) | ||
- | * (Use a JIS screwdriver for JIS screws. JIS screws look like Philips screws with a dot in the center of the head, but the JIS version is a wider blade with different spline angles. Using a Philips screwdriver on a JIS screw will often round out the screw head. However, using a JIS screwdriver on a Philips-head screw may work just fine, since the driver splines fit snugly on the upper, heavier part of the screw head.) | ||
- | |||
- | 45815-03 - Chrome Fork Slider Drain Screw Kit((Folkie - xlforum.net/forums/showthread.php?t=738626))\\ | ||
- | Screw size is M4 (0.7mm) × 6mm - Includes a pair of chrome allen head drain screws and washers - Uses 2.5mm allen key | ||
\\ | \\ | ||
- | |||