Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revision Both sides next revision
techtalk:evo:susp01 [2019/07/10 19:22]
ixl2relax [Fork Oil Drain Screws]
techtalk:evo:susp01 [2019/10/31 07:03]
ixl2relax [Front Fork Info]
Line 45: Line 45:
  
 \\ \\
 +
 +The 39mm Fork Caps need a 1-3/​8"​(1.375"​) socket or Cap Wrench. A usable equivalent is a 35mm(1.378"​) size. It's a good idea to wrap masking tape, electrical tape or duct tape (depending on the thickness of the tape) around the chrome cap to protect if from marks. ((See this XLForum Thread: http://​xlforum.net/​forums/​showthread.php?​t=675643))
 +
 \\ \\
 +
 +===== Fork Oil Drain Screws =====
 +
 +45790-80 - Stock __JIS-head__ Drain Screw with Washer (Requires 1 for each fork)\\
 +    * (Starting in 2008, some models do not have fork oil drain screws)
 +    * (Use a JIS screwdriver for JIS screws. JIS screws look like Philips screws with a dot in the center of the head, but the JIS version is a wider blade with different spline angles. Using a Philips screwdriver on a JIS screw will often round out the screw head. However, using a JIS screwdriver on a Philips-head screw may work just fine, since the driver splines fit snugly on the upper, heavier part of the screw head.)
 +
 +45815-03 - Chrome Fork Slider Drain Screw Kit((Folkie - xlforum.net/​forums/​showthread.php?​t=738626))\\
 +Screw size is M4 (0.7mm) × 6mm - Includes a pair of chrome allen head drain screws and washers - Uses 2.5mm allen key
 +
 +
 +\\
 +
 \\ \\
  
Line 292: Line 308:
 |Damper Rod Screw Lt |  N/A        |  45500236 ​ |  N/A      |              | |Damper Rod Screw Lt |  N/A        |  45500236 ​ |  N/A      |              |
  
- 
- 
-====== Fork Oil Drain Screws ====== 
- 
-45790-80 - Stock __JIS-head__ Drain Screw with Washer (Requires 1 for each fork)\\ 
-    * (Starting in 2008, some models do not have fork oil drain screws) 
-    * (Use a JIS screwdriver for JIS screws. JIS screws look like Philips screws with a dot in the center of the head, but the JIS version is a wider blade with different spline angles. Using a Philips screwdriver on a JIS screw will often round out the screw head. However, using a JIS screwdriver on a Philips-head screw may work just fine, since the driver splines fit snugly on the upper, heavier part of the screw head.) 
- 
-45815-03 - Chrome Fork Slider Drain Screw Kit((Folkie - xlforum.net/​forums/​showthread.php?​t=738626))\\ 
-Screw size is M4 (0.7mm) × 6mm - Includes a pair of chrome allen head drain screws and washers - Uses 2.5mm allen key 
  
  
 \\ \\
-