Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision | Next revision Both sides next revision | ||
|
techtalk:evo:susp01 [2019/10/31 07:00] ixl2relax [Front Fork Info] |
techtalk:evo:susp01 [2019/10/31 07:02] ixl2relax |
||
|---|---|---|---|
| Line 49: | Line 49: | ||
| \\ | \\ | ||
| + | |||
| + | ===== Fork Oil Drain Screws ===== | ||
| + | |||
| + | 45790-80 - Stock __JIS-head__ Drain Screw with Washer (Requires 1 for each fork)\\ | ||
| + | * (Starting in 2008, some models do not have fork oil drain screws) | ||
| + | * (Use a JIS screwdriver for JIS screws. JIS screws look like Philips screws with a dot in the center of the head, but the JIS version is a wider blade with different spline angles. Using a Philips screwdriver on a JIS screw will often round out the screw head. However, using a JIS screwdriver on a Philips-head screw may work just fine, since the driver splines fit snugly on the upper, heavier part of the screw head.) | ||
| + | |||
| + | 45815-03 - Chrome Fork Slider Drain Screw Kit((Folkie - xlforum.net/forums/showthread.php?t=738626))\\ | ||
| + | Screw size is M4 (0.7mm) × 6mm - Includes a pair of chrome allen head drain screws and washers - Uses 2.5mm allen key | ||
| + | |||
| + | |||
| + | \\ | ||
| + | |||
| \\ | \\ | ||
| Line 295: | Line 308: | ||
| |Damper Rod Screw Lt | N/A | 45500236 | N/A | | | |Damper Rod Screw Lt | N/A | 45500236 | N/A | | | ||
| - | |||
| - | |||
| - | ====== Fork Oil Drain Screws ====== | ||
| - | |||
| - | 45790-80 - Stock __JIS-head__ Drain Screw with Washer (Requires 1 for each fork)\\ | ||
| - | * (Starting in 2008, some models do not have fork oil drain screws) | ||
| - | * (Use a JIS screwdriver for JIS screws. JIS screws look like Philips screws with a dot in the center of the head, but the JIS version is a wider blade with different spline angles. Using a Philips screwdriver on a JIS screw will often round out the screw head. However, using a JIS screwdriver on a Philips-head screw may work just fine, since the driver splines fit snugly on the upper, heavier part of the screw head.) | ||
| - | |||
| - | 45815-03 - Chrome Fork Slider Drain Screw Kit((Folkie - xlforum.net/forums/showthread.php?t=738626))\\ | ||
| - | Screw size is M4 (0.7mm) × 6mm - Includes a pair of chrome allen head drain screws and washers - Uses 2.5mm allen key | ||
| \\ | \\ | ||
| - | |||
