Differences

This shows you the differences between two versions of the page.

--- techtalk:evo:susp01 [2019/10/31 07:00]
ixl2relax [Front Fork Info]
+++ techtalk:evo:susp01 [2019/12/30 06:53]
ixl2relax [Fork Service Kits]
@@ Line 46: / Line 46: @@
 \\
-The 39mm Fork Caps need a 1-3/8"(1.375") socket or Cap Wrench. A usable equivalent is a 35mm(1.378") size. It's a good idea to wrap masking tape, electrical tape or duct tape (depending on the thickness of the tape) around the chrome cap to protect if from marks.
+The 39mm Fork Caps need a 1-3/8"(1.375") socket or Cap Wrench. A usable equivalent is a 35mm(1.378") size. It's a good idea to wrap masking tape, electrical tape or duct tape (depending on the thickness of the tape) around the chrome cap to protect if from marks. ((See this XLForum Thread: http://xlforum.net/forums/showthread.php?t=675643))
 \\
+===== Fork Oil Drain Screws =====
+-80 - Stock __JIS-head__ Drain Screw with Washer (Requires 1 for each fork)\\
+    * (Starting in 2008, some models do not have fork oil drain screws)
+    * (Use a JIS screwdriver for JIS screws. JIS screws look like Philips screws with a dot in the center of the head, but the JIS version is a wider blade with different spline angles. Using a Philips screwdriver on a JIS screw will often round out the screw head. However, using a JIS screwdriver on a Philips-head screw may work just fine, since the driver splines fit snugly on the upper, heavier part of the screw head.)
+-03 - Chrome Fork Slider Drain Screw Kit((Folkie - xlforum.net/forums/showthread.php?t=738626))\\
+Screw size is M4 (0.7mm) × 6mm - Includes a pair of chrome allen head drain screws and washers - Uses 2.5mm allen key
+\\
 \\
@@ Line 284: / Line 297: @@
 |Dust Seal           | 45401-87    | 46512-01A  | J8130.3A8 | Into Outer Slide Tube |
 |Stopper Ring        | 45905-87    | 46513-01   | 45842-77A | Wire Retaining Clip |
-|Oil Seal            | 45378-87    | 46514-01A  | 12085     | Into Outer Slide Tube |
+|Oil Seal            | 45378-87    | 46514-01A  | 12085     | Into Outer Slide Tube * |
 |Seal Spacer         | 45377-87    | 46515-01   | 46346-06  | Into Outer Slide Tube |
 |Guide Bushing       | 45461-87    | 46516-01   | 46343-06  | Into Outer Slide Tube |
@@ Line 294: / Line 307: @@
 |Damper Rod Screw Rt |  N/A        |  45500118  |  N/A      |              |
 |Damper Rod Screw Lt |  N/A        |  45500236  |  N/A      |              |
+|  * Oil Seal is driven into Outer Slide Tube - Letter Side Up - Hollow Side Down |||||
-====== Fork Oil Drain Screws ======
--80 - Stock __JIS-head__ Drain Screw with Washer (Requires 1 for each fork)\\
-    * (Starting in 2008, some models do not have fork oil drain screws)
-    * (Use a JIS screwdriver for JIS screws. JIS screws look like Philips screws with a dot in the center of the head, but the JIS version is a wider blade with different spline angles. Using a Philips screwdriver on a JIS screw will often round out the screw head. However, using a JIS screwdriver on a Philips-head screw may work just fine, since the driver splines fit snugly on the upper, heavier part of the screw head.)
--03 - Chrome Fork Slider Drain Screw Kit((Folkie - xlforum.net/forums/showthread.php?t=738626))\\
-Screw size is M4 (0.7mm) × 6mm - Includes a pair of chrome allen head drain screws and washers - Uses 2.5mm allen key
 \\

Trace:

Differences

Navigation

Search

Toolbox