Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision | Next revision Both sides next revision | ||
|
techtalk:evo:transfinal04 [2019/06/11 08:59] ixl2relax [Shifter Assembly] |
techtalk:evo:transfinal04 [2019/06/11 08:59] ixl2relax [Shifter Assembly] |
||
|---|---|---|---|
| Line 34: | Line 34: | ||
| The oil seal can be removed without removing the primary cover - remove the lever, then use a pick or screwdriver to pry the seal out of the cavity. | The oil seal can be removed without removing the primary cover - remove the lever, then use a pick or screwdriver to pry the seal out of the cavity. | ||
| - | The Oil Seal is installed first, followed by the washer/spacer (NOTE that the parts manual for 2004 & 2005 shows the Rubber Washer installed first & then the Oil Seal - but this is **WRONG!**) | + | The Oil Seal is installed first, followed by the washer/spacer\\ |
| + | (NOTE that the parts manual for 2004 & 2005 shows the Rubber Washer installed first & then the Oil Seal - but this is **WRONG!**) | ||
| On installs, be sure to put tape over the splines on the shifter shaft before installing the oil seal to prevent the splines from cutting the seal. | On installs, be sure to put tape over the splines on the shifter shaft before installing the oil seal to prevent the splines from cutting the seal. | ||
