Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revision Both sides next revision
techtalk:evo:wheels02 [2018/05/31 23:31]
ixl2relax [Brake System]
techtalk:evo:wheels02 [2019/04/14 03:38]
hippysmack [2001]
Line 20: Line 20:
  
 ====== Replacing Brake Pads ====== ====== Replacing Brake Pads ======
-===== 2001 =====+===== 2001 Style Caliper ​=====
 **Wrench Sizes & Torque Specs** \\ \\ **Caution** the use of 6-point sockets and vise-grips will round off the bolt corners. ((Jheitt of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​p=5667519#​post5667519)) **Wrench Sizes & Torque Specs** \\ \\ **Caution** the use of 6-point sockets and vise-grips will round off the bolt corners. ((Jheitt of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​p=5667519#​post5667519))
  
  
   * **Changing pads**:   * **Changing pads**:
-  * Caliper to fork mounting bolts (2):+  * Caliper to fork mounting bolts (2) (rectangles in pic below):
     * Wrench (10mm 12-point), Torque (28-38 ft/lbs / 38-51.5 Nm). ((2000 HD XLH FSM pg 2-46))     * Wrench (10mm 12-point), Torque (28-38 ft/lbs / 38-51.5 Nm). ((2000 HD XLH FSM pg 2-46))
-  * Brake Pad Slide Pins (2): The small bolts on the caliper need to be removed in order to change the pads. ((Jheitt of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​p=5667519#​post5667519)) They will give an audible click when inserted into the housing. ((2000 HD XLH FSM pg 2-45))+  * Brake Pad Slide Pins (2) (five sided box below):  
 +    * The small bolts on the caliper need to be removed in order to change the pads. ((Jheitt of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​p=5667519#​post5667519)) ​\\ They will give an audible click when inserted into the housing. ((2000 HD XLH FSM pg 2-45))
     * Wrench (1/4" 12-point), Torque (180-200 in/lbs / 20.3-22.6 Nm). ((2000 HD XLH FSM pg 2-45))     * Wrench (1/4" 12-point), Torque (180-200 in/lbs / 20.3-22.6 Nm). ((2000 HD XLH FSM pg 2-45))
   * Bleeder valve:   * Bleeder valve:
     * Torque (80-100 in/lbs / 9.0-11.3 Nm) ((2000 HD XLH FSM pg 2-45))     * Torque (80-100 in/lbs / 9.0-11.3 Nm) ((2000 HD XLH FSM pg 2-45))
 +  * Banjo bolt on caliper (six sided box below):
 +    * Wrench (3/8" 12-point)
 +  * Banjo bolt at M/C:
 +    * Wrench (7/16 12-point)
  
   * **Disassembling the caliper**: ​   * **Disassembling the caliper**: ​
-  * Bridge bolts (2): The 2 larger bolts to the right on the caliper. These hold the caliper halves together and shouldn'​t ​be need to be removed unless you are rebuilding the caliper. ((Jheitt of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​p=5667519#​post5667519))+  * Bridge bolts (2) (rectangles in pic below): 
 +  * The 2 larger bolts to the right on the caliper. ​\\ These hold the caliper halves together and shouldn'​t need to be removed unless you are rebuilding the caliper. ((Jheitt of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​p=5667519#​post5667519))
     * Wrench (10mm 12-point), Torque (28-38 ft/lbs / 38.0-51.5 Nm). ((2000 HD XLH FSM pg 2-45))     * Wrench (10mm 12-point), Torque (28-38 ft/lbs / 38.0-51.5 Nm). ((2000 HD XLH FSM pg 2-45))
  
- + 02 Caliper ​((photo by spibbie ​of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​t=1857463))  
- +|{{:​techtalk:​evo:​wheels:​caliper_bolt_sizes_by_spibbie.jpg?​direct&​300|}}|
-|{{:​techtalk:​evo:​wheels:​2001_883c_brake_caliper_by_jheitt.jpg?​direct&​300|}} ​((photo by Jheitt ​of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​p=5667519#​post5667519))| +
- +