Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
|
techtalk:ih:body01w [2021/05/17 04:09] hippysmack [Coil / Regulator Mount Casting 65-66 XLH, 65 XLCH] |
techtalk:ih:body01w [2023/12/28 01:47] (current) hippysmack |
||
|---|---|---|---|
| Line 14: | Line 14: | ||
| ===== Top Center Motor Mount ===== | ===== Top Center Motor Mount ===== | ||
| - | The easiest way to tell if you have a K or KH (52-56) and not a Sportster frame at a glance is to look at the top motor mount bracket, also called the "engine steady." ((GA_Ironhead of the XLFORUM http://xlforum.net/forums/showthread.php?t=1543545&page=2)) \\ | + | The easiest way to tell if you have a K or KH (52-56) and not a Sportster frame at a glance is to look at the top motor mount bracket, also called the "engine steady." ((GA_Ironhead of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/142439-frame-casting-id/page2?t=1543545&page=2)) \\ |
| * K and KH model top motor mount bracket is a cast piece and is open to either side. Some K model top motor mounts have casting numbers. Some do not. \\ | * K and KH model top motor mount bracket is a cast piece and is open to either side. Some K model top motor mounts have casting numbers. Some do not. \\ | ||
| * The Sportster bracket (from 57-76) is made from stamped steel and looks like an open-sided box on the right side. \\ | * The Sportster bracket (from 57-76) is made from stamped steel and looks like an open-sided box on the right side. \\ | ||
| Line 29: | Line 29: | ||
| * The top front motor mount has 4 bolts and attaches to both the rocker box and to two 5/16"-18 threaded holes under the neck. | * The top front motor mount has 4 bolts and attaches to both the rocker box and to two 5/16"-18 threaded holes under the neck. | ||
| - | {{:techtalk:ih:body:motor_mount_k-kh_by_animalhouse2010.jpg?direct&300|}} ((photo courtesy of Ebay seller, animalhouse2010, [[https://www.ebay.com/str/animalhouse2010?_trksid=p2047675.l2563|Link to Ebay store:]] )) {{:techtalk:ih:body:motor_mount_1957-1966_sportster_by_bigport.jpg?direct&300|}} ((photo by Bigport of the XLFORUM http://xlforum.net/forums/showthread.php?t=1951365)) {{:techtalk:ih:body:motor_mount_1967-1976_sportster_by_animalhouse2010.jpg?direct&300|}} ((photo courtesy of Ebay seller, animalhouse2010, [[https://www.ebay.com/str/animalhouse2010?_trksid=p2047675.l2563|Link to Ebay store:]] )) \\ | + | {{:techtalk:ih:body:motor_mount_k-kh_by_animalhouse2010.jpg?direct&300|}} ((photo courtesy of Ebay seller, animalhouse2010, [[https://www.ebay.com/str/animalhouse2010?_trksid=p2047675.l2563|Link to Ebay store:]] )) {{:techtalk:ih:body:motor_mount_1957-1966_sportster_by_bigport.jpg?direct&300|}} ((photo by Bigport of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/181280-60s-sportster-frame-identification?t=1951365)) {{:techtalk:ih:body:motor_mount_1967-1976_sportster_by_animalhouse2010.jpg?direct&300|}} ((photo courtesy of Ebay seller, animalhouse2010, [[https://www.ebay.com/str/animalhouse2010?_trksid=p2047675.l2563|Link to Ebay store:]] )) \\ |
| - | {{:techtalk:ih:body:motor_mount_1977-1978_sportster_by_animalhouse2010.jpg?direct&300|}} ((photo courtesy of Ebay seller, animalhouse2010, [[https://www.ebay.com/str/animalhouse2010?_trksid=p2047675.l2563|Link to Ebay store:]] )) {{:techtalk:ih:body:motor_mount_1979-1981_sportster_by_ddddylan.jpg?direct&300|}} ((photo by DDDDylan http://xlforum.net/forums/showthread.php?t=1723089&highlight=1979+frame)) {{:techtalk:ih:body:motor_mount_1982-1985_sportster_by_mike83xlx.jpg?direct&300|}} ((photo by Mike83XLX of the XLFORUM http://xlforum.net/forums/showthread.php?t=785156)) \\ | + | {{:techtalk:ih:body:motor_mount_1977-1978_sportster_by_animalhouse2010.jpg?direct&300|}} ((photo courtesy of Ebay seller, animalhouse2010, [[https://www.ebay.com/str/animalhouse2010?_trksid=p2047675.l2563|Link to Ebay store:]] )) {{:techtalk:ih:body:motor_mount_1979-1981_sportster_by_ddddylan.jpg?direct&300|}} ((photo by DDDDylan https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/160575-1979-sportster-frame-does-this-look-stock?t=1723089&highlight=1979+frame)) {{:techtalk:ih:body:motor_mount_1982-1985_sportster_by_mike83xlx.jpg?direct&300|}} ((photo by Mike83XLX of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/94591-1983-xlx-build?t=785156)) \\ |
| ===== Backbone Profile ===== | ===== Backbone Profile ===== | ||
| * Rocker Box Clearance: | * Rocker Box Clearance: | ||
| *K Models have a straight backbone tube end to end. | *K Models have a straight backbone tube end to end. | ||
| - | * 1957-1976 Sportsters have a "smashed" underside of the backbone to make room for the rear rocker box. \\ The underside of the back bone is tapered starting from the front of the seat casting to the motor mount. | + | * L1956-1976 K Model / Sportsters have a "smashed" underside of the backbone to make room for the rear rocker box. \\ The underside of the back bone is tapered starting from the front of the seat casting to the motor mount. |
| * 1977-1981 Sportsters also have the tapered underside of the backbone from the top rear motor mount past the area over the rear rocker box. | * 1977-1981 Sportsters also have the tapered underside of the backbone from the top rear motor mount past the area over the rear rocker box. | ||
| * 1982-1985 Sportsters had a frame design raising the backbone which removed the need to taper the underside for rocker box clearance. | * 1982-1985 Sportsters had a frame design raising the backbone which removed the need to taper the underside for rocker box clearance. | ||
| Line 46: | Line 46: | ||
| See pics above also for 79-85. \\ | See pics above also for 79-85. \\ | ||
| - | {{:techtalk:ih:body:backbone_on_k_model_by_fergerburger.jpg?direct&300|}} ((photo by fergerburger of the XLFORUM http://xlforum.net/forums/showthread.php?t=1516975)) {{:techtalk:ih:body:backbone_1957-1972_sportster_by_akchopper.jpg?direct&300|}} ((photo by akchopper of the XLFORUM)) \\ | + | {{:techtalk:ih:body:backbone_on_k_model_by_fergerburger.jpg?direct&300|}} ((photo by fergerburger of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/139858-53-k-frame-in-the-garage?t=1516975)) {{:techtalk:ih:body:backbone_1957-1972_sportster_by_akchopper.jpg?direct&300|}} ((photo by akchopper of the XLFORUM)) \\ |
| - | {{:techtalk:ih:body:backbone_1973-1978_sportster_by_rusty_dusty_parts.jpg?direct&300|}} ((photo courtesy of Ebay seller, rusty_dusty_parts, [[https://www.ebay.com/str/bialystreasures?_trksid=p2047675.l2563|Link to Ebay store:]] )) {{:techtalk:ih:body:backbone_1979-1981_backbone_by_owlsplace.jpg?direct&300|}} ((photo by owlsplace of the XLFORUM http://xlforum.net/forums/showthread.php?t=2073507)) \\ | + | {{:techtalk:ih:body:backbone_1973-1978_sportster_by_rusty_dusty_parts.jpg?direct&300|}} ((photo courtesy of Ebay seller, rusty_dusty_parts, [[https://www.ebay.com/str/bialystreasures?_trksid=p2047675.l2563|Link to Ebay store:]] )) {{:techtalk:ih:body:backbone_1979-1981_backbone_by_owlsplace.jpg?direct&300|}} ((photo by owlsplace of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/196947-short-shift-lever-is-actually-wrong-peg?t=2073507)) \\ |
| ====== Neck ====== | ====== Neck ====== | ||
| ===== Neck Profile ===== | ===== Neck Profile ===== | ||
| - | On pre-73 Sportsters notedly XLH, the hole up front on the right side of the tube is for the wiring bundle from the forks to run into. ((piniongear of the XLFORUM http://xlforum.net/forums/showthread.php?t=1787443)) \\ | + | On pre-73 Sportsters notedly XLH, the hole up front on the right side of the tube is for the wiring bundle from the forks to run into. ((piniongear of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/166376-wiring-in-frame?t=1787443)) \\ |
| The wiring runs through the frame backbone and exits at the mid point for the switch wiring. \\ | The wiring runs through the frame backbone and exits at the mid point for the switch wiring. \\ | ||
| Then the remainder of the wires exit at the tail end of the tube, going to the battery, relays and etc. \\ | Then the remainder of the wires exit at the tail end of the tube, going to the battery, relays and etc. \\ | ||
| Line 61: | Line 61: | ||
| You may find post 72 necks / frame tubes with (owner drilled) holes to retro the main wiring through the backbone to clean up the look. \\ | You may find post 72 necks / frame tubes with (owner drilled) holes to retro the main wiring through the backbone to clean up the look. \\ | ||
| - | {{:techtalk:ih:body:neck_-_early_k_model_by_animalhouse2010.jpg?direct&300|}} ((photo courtesy of Ebay seller, animalhouse2010, [[https://www.ebay.com/str/animalhouse2010?_trksid=p2047675.l2563|Link to Ebay store:]] )) {{:techtalk:ih:body:neck_-_l1956-1969_by_akchopper.jpg?direct&300|}} ((photo by akchopper of the XLFORUM http://xlforum.net/forums/showthread.php?t=2079350)) \\ | + | {{:techtalk:ih:body:neck_-_early_k_model_by_animalhouse2010.jpg?direct&300|}} ((photo courtesy of Ebay seller, animalhouse2010, [[https://www.ebay.com/str/animalhouse2010?_trksid=p2047675.l2563|Link to Ebay store:]] )) {{:techtalk:ih:body:neck_-_l1956-1969_by_akchopper.jpg?direct&300|}} ((photo by akchopper of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/202203-ironhead-frames-in-the-sportsterpedia?t=2079350)) \\ |
| {{:techtalk:ih:body:neck_-_1970-1972_xlh_xlch_by_rusty_dusty_motorcycle_parts.jpg?direct&300|}} ((photo courtesy of Eaby seller, Rusty Dusty Motorcycle Parts. [[https://www.ebay.com/str/bialystreasures?_trksid=p2047675.l2563|Link to Ebay Store]] )) {{:techtalk:ih:body:neck_-_1973-1978_xlh_xlch_by_motorcycle_dreams.jpg?direct&300|}} ((photo courtesy of Ebay seller, Motorcycle Dreams. [[https://www.ebay.com/str/motorcycledreams|Link to Ebay Store:]] )) \\ | {{:techtalk:ih:body:neck_-_1970-1972_xlh_xlch_by_rusty_dusty_motorcycle_parts.jpg?direct&300|}} ((photo courtesy of Eaby seller, Rusty Dusty Motorcycle Parts. [[https://www.ebay.com/str/bialystreasures?_trksid=p2047675.l2563|Link to Ebay Store]] )) {{:techtalk:ih:body:neck_-_1973-1978_xlh_xlch_by_motorcycle_dreams.jpg?direct&300|}} ((photo courtesy of Ebay seller, Motorcycle Dreams. [[https://www.ebay.com/str/motorcycledreams|Link to Ebay Store:]] )) \\ | ||
| Line 68: | Line 68: | ||
| **Neck Casting Numbers**: \\ | **Neck Casting Numbers**: \\ | ||
| - | * On the neck web of an early Sportster frame, you should find a casting number. ((GA_Ironhead of the XLFORUM http://xlforum.net/forums/archive/index.php/t-1543545.html)) \\ | + | * On the neck web of an early Sportster frame, you should find a casting number. \\ |
| * Casting numbers ending in -52 are for 1952-1953 K Model frames. \\ Possibly 52 & 53 Ks used non welded -52 neck casting frames. | * Casting numbers ending in -52 are for 1952-1953 K Model frames. \\ Possibly 52 & 53 Ks used non welded -52 neck casting frames. | ||
| * Casting numbers ending in -52A are for possibly L1954-E1955 K Model frames. \\ Possibly 54 Ks had welded -52 neck or -52A neck castings. | * Casting numbers ending in -52A are for possibly L1954-E1955 K Model frames. \\ Possibly 54 Ks had welded -52 neck or -52A neck castings. | ||
| - | * Casting numbers ending in -56 are for 1956-Up K Model and XLH Sportster frames. | + | * Casting numbers ending in -56 are for 1956-Up K Model and all Sportster frames. ((Dr Dick of the XLFORUM)) |
| * Early 1956 K neck casting does not have a "stem ridge" (diagonal line extending thru the stem). | * Early 1956 K neck casting does not have a "stem ridge" (diagonal line extending thru the stem). | ||
| * Late 1956 K and 1957-Up XLH casting does have the "stem ridge". | * Late 1956 K and 1957-Up XLH casting does have the "stem ridge". | ||
| - | * Casting numbers ending in -58 are for XLCH frames. | ||
| Click on a pic to enlarge: \\ | Click on a pic to enlarge: \\ | ||
| Line 82: | Line 81: | ||
| |Notice the different gas tank mount hole to number positions and webbing height between XLH and XLCH. (Note: extra hole on orange frame below owner induced). \\ Painted surfaces can sometimes skew the numbers to look differently.||| | |Notice the different gas tank mount hole to number positions and webbing height between XLH and XLCH. (Note: extra hole on orange frame below owner induced). \\ Painted surfaces can sometimes skew the numbers to look differently.||| | ||
| - | |Found on 67-69 XLH, Casting (-56) ((photo courtesy of Ebay seller, solorider59. [[https://www.ebay.com/sch/solorider59/m.html?item=265025798295&nordt=true&ul_noapp=true&nma=true&orig_cvip=true&rt=nc&si=0gd58W0xPiMF4jSQd4HmHfCtfc8%253D&_trksid=p2047675.l2562|Link to items for sale]] ))|Found on 67-69 XLCH, Casting (-56 or -58?) ((photo courtesy of Ebay seller, animalhouse2010, [[https://www.ebay.com/str/animalhouse2010?_trksid=p2047675.l2563|Link to Ebay store:]] ))|Found on 67-69 XLCH, Casting (-58) ((photo courtesy of Ebay seller, animalhouse2010, [[https://www.ebay.com/str/animalhouse2010?_trksid=p2047675.l2563|Link to Ebay store:]] ))| | + | |Found on 67-69 XLH, Casting (-56) ((photo courtesy of Ebay seller, solorider59. [[https://www.ebay.com/sch/solorider59/m.html?item=265025798295&nordt=true&ul_noapp=true&nma=true&orig_cvip=true&rt=nc&si=0gd58W0xPiMF4jSQd4HmHfCtfc8%253D&_trksid=p2047675.l2562|Link to items for sale]] ))|Found on 67-69 XLCH, Casting (-56) ((photo courtesy of Ebay seller, animalhouse2010, [[https://www.ebay.com/str/animalhouse2010?_trksid=p2047675.l2563|Link to Ebay store:]] ))|Found on 67-69 XLCH, Casting (-56) ((photo courtesy of Ebay seller, animalhouse2010, [[https://www.ebay.com/str/animalhouse2010?_trksid=p2047675.l2563|Link to Ebay store:]] ))| |
| |{{:techtalk:ih:body:neck_casting_1967-1969_xlh_by_solorider59.jpg?direct&300|}}|{{:techtalk:ih:body:neck_casting_1967-1969_xlch_by_animalhouse2010.jpg?direct&300|}}|{{:techtalk:ih:body:neck_casting_1967-1969_xlch_pic2_by_animalhouse2010.jpg?direct&300|}}| | |{{:techtalk:ih:body:neck_casting_1967-1969_xlh_by_solorider59.jpg?direct&300|}}|{{:techtalk:ih:body:neck_casting_1967-1969_xlch_by_animalhouse2010.jpg?direct&300|}}|{{:techtalk:ih:body:neck_casting_1967-1969_xlch_pic2_by_animalhouse2010.jpg?direct&300|}}| | ||
| Line 96: | Line 95: | ||
| * 1957-1966 XL, XLH and 1958-1969 XLC, XLCH will have the older style seat casting with the seat bracket “Leaning” forward. | * 1957-1966 XL, XLH and 1958-1969 XLC, XLCH will have the older style seat casting with the seat bracket “Leaning” forward. | ||
| * 1967-1972 XLH, 1970-1972 XLCH will have the seat casting with the “Pyramid” shaped seat bracket. | * 1967-1972 XLH, 1970-1972 XLCH will have the seat casting with the “Pyramid” shaped seat bracket. | ||
| - | * 1973-1978 Sportsters no longer use steel casting for the seat mount. \\ It was replaced with steel straps covering the each side of the frame tube with open holes to hold the support for the seat. ((piniongear of the XLFORUM http://xlforum.net/forums/showthread.php?t=1476377)) \\ A steel bracket assembly is welded to the backbone. | + | * 1973-1978 Sportsters no longer use steel casting for the seat mount. \\ It was replaced with steel straps covering the each side of the frame tube with open holes to hold the support for the seat. ((piniongear of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/136081-help-on-identifying-the-year-of-my-frame?t=1476377)) \\ A steel bracket assembly is welded to the backbone. |
| * 1979-1981, the frame changed drastically in the area of the seat and includes a sub frame assembly in the rear behind the seat posts. \\ The newly designed oil tank that doubles as a battery tray sits inside the sub frame. \\ The seat bracket changed to more of a wide hook instead of a fastened connection attached facing the rear. | * 1979-1981, the frame changed drastically in the area of the seat and includes a sub frame assembly in the rear behind the seat posts. \\ The newly designed oil tank that doubles as a battery tray sits inside the sub frame. \\ The seat bracket changed to more of a wide hook instead of a fastened connection attached facing the rear. | ||
| {{:techtalk:ih:body:seat_casting_-_leaned_forward_style_by_animalhouse2010.jpg?direct&300|}} ((photo courtesy of Ebay seller, animalhouse2010, [[https://www.ebay.com/str/animalhouse2010?_trksid=p2047675.l2563|Link to Ebay store:]] )) {{:techtalk:ih:body:seat_casting_-_pyramid_by_rusty_dusty_motorcycle_parts.jpg?direct&300|}} ((photo courtesy of Ebay seller, rusty_dusty_parts, [[https://www.ebay.com/str/bialystreasures?_trksid=p2047675.l2563|Link to Ebay store:]] )) \\ | {{:techtalk:ih:body:seat_casting_-_leaned_forward_style_by_animalhouse2010.jpg?direct&300|}} ((photo courtesy of Ebay seller, animalhouse2010, [[https://www.ebay.com/str/animalhouse2010?_trksid=p2047675.l2563|Link to Ebay store:]] )) {{:techtalk:ih:body:seat_casting_-_pyramid_by_rusty_dusty_motorcycle_parts.jpg?direct&300|}} ((photo courtesy of Ebay seller, rusty_dusty_parts, [[https://www.ebay.com/str/bialystreasures?_trksid=p2047675.l2563|Link to Ebay store:]] )) \\ | ||
| - | {{:techtalk:ih:body:seat_bracket_1973-1978_sportster_by_animalhouse2010.jpg?direct&300|}} ((photo courtesy of Ebay seller, animalhouse2010, [[https://www.ebay.com/str/animalhouse2010?_trksid=p2047675.l2563|Link to Ebay store:]] )) {{:techtalk:ih:body:seat_bracket_1979-1981_sportster_by_ladysweettea.jpg?direct&300|}} ((photo by LadySweetTea of the XLFORUM http://xlforum.net/forums/showthread.php?t=1565437)) \\ | + | {{:techtalk:ih:body:seat_bracket_1973-1978_sportster_by_animalhouse2010.jpg?direct&300|}} ((photo courtesy of Ebay seller, animalhouse2010, [[https://www.ebay.com/str/animalhouse2010?_trksid=p2047675.l2563|Link to Ebay store:]] )) {{:techtalk:ih:body:seat_bracket_1979-1981_sportster_by_ladysweettea.jpg?direct&300|}} ((photo by LadySweetTea of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/144379-78-vs-79-seats?t=1565437)) \\ |
| \\ | \\ | ||
| ===== Coil / Regulator Mount Casting 65-66 XLH, 65 XLCH ===== | ===== Coil / Regulator Mount Casting 65-66 XLH, 65 XLCH ===== | ||
| - | * 1965 XLH frame had a special location for the spark coil. \\ The right underside seat casting was modded to include a flat bossed area at 45° with two threaded holes for the coil bracket. \\ The angled bracket is bent to run under the frame to the left side where the coil is attached. | + | * 1965-1966 XLH frame had a special location for the spark coil. \\ The right underside seat casting was modded to include a flat bossed area at 45° with two threaded holes for the coil bracket. \\ The angled bracket is bent to run under the frame to the left side where the coil is attached. |
| - | * 1965 (only) XLCH used Bosch 12v regulator that was mounted between top of the horseshoe oil tank and the frame. ((Dr Dick of the XLFORUM http://xlforum.net/forums/showthread.php?t=1002752)) \\ The right side seat casting was modded to include a flat area at 45° with two 1/4"-28 threaded holes to affix the regulator bracket. \\ It used a 1 year only bracket that attached to the "one year only" (i have seen them on 66 ch also) under-seat frame casting. \\ For 65 only, the regulator moves away from the top of the generator and is actually bolted above the tool box, left hand side hence special frame bracket and/or moded casting. ((thefrenchowl of the XLFORUM http://xlforum.net/forums/showthread.php?t=1002752)) \\ | + | * 1965 (only) XLCH used Bosch 12v regulator that was mounted between top of the horseshoe oil tank and the frame. ((Dr Dick of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/108813-old-style-iron-head-frames-1952-to-1978?t=1002752)) \\ The right side seat casting was modded to include the same flat area at 45° with two 1/4"-28 threaded holes to affix the regulator bracket. \\ It used a 1 year only bracket that attached to the under-seat frame casting. \\ For 65 only, the regulator moves away from the top of the generator and is actually bolted above the tool box, left hand side hence special frame bracket and/or moded casting. ((thefrenchowl of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/108813-old-style-iron-head-frames-1952-to-1978?t=1002752)) \\ But that bossed area was included on 66-69 XLCH frames without the holes threaded. \\ |
| Earliest known appearance according to the K Model site is April of 1964. Present through 1966 on XLH and may be through 1969 on XLCH. \\ | Earliest known appearance according to the K Model site is April of 1964. Present through 1966 on XLH and may be through 1969 on XLCH. \\ | ||
| Later models may have still had this casting but reportedly the holes were not threaded since newer models didn't use them. \\ | Later models may have still had this casting but reportedly the holes were not threaded since newer models didn't use them. \\ | ||
| Even though the casting began to appear on frames in late 1964 in anticipation of the new mounting locations; \\ | Even though the casting began to appear on frames in late 1964 in anticipation of the new mounting locations; \\ | ||
| - | The regulator wasn't mounted there until the 1965 model year when the switch was made to the 12v system. ((Magneto Sportster of the XLFORUM http://xlforum.net/forums/showthread.php?t=649699&page=6)) \\ | + | The regulator wasn't mounted there until the 1965 model year when the switch was made to the 12v system. ((Magneto Sportster of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/85218-1965-xlch-only-model-specific-help/page6?t=649699&page=6)) \\ |
| - | {{:techtalk:ih:body:1965-1966_xlh_coil_mount_-_1965_xlch_reg_mount_boss_pic1_by_bigport.jpg?direct&300|}} ((photo by Bigport of the XLFORUM http://xlforum.net/forums/showthread.php?t=1951365)) \\ | + | {{:techtalk:ih:body:1965-1966_xlh_coil_mount_-_1965_xlch_reg_mount_boss_pic1_by_bigport.jpg?direct&300|}} ((photo by Bigport of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/181280-60s-sportster-frame-identification?t=1951365)) \\ |
| ===== Seat Casting Larger Webbing (right side) ===== | ===== Seat Casting Larger Webbing (right side) ===== | ||
| Line 125: | Line 123: | ||
| |{{:techtalk:ih:body:seat_cast_webbing_-_57-66_xl_xlh_58-69_xlc_xlch_by_animalhouse2010.jpg?direct&300|}}|{{:techtalk:ih:body:seat_cast_webbing_-_67-69_xlh_sportster_by_cyclewarehouse.jpg?direct&300|}}| | |{{:techtalk:ih:body:seat_cast_webbing_-_57-66_xl_xlh_58-69_xlc_xlch_by_animalhouse2010.jpg?direct&300|}}|{{:techtalk:ih:body:seat_cast_webbing_-_67-69_xlh_sportster_by_cyclewarehouse.jpg?direct&300|}}| | ||
| - | | 1971 XLCH (w/ Buddy Seat) key switch and coil locations. ((photos by The Doctor 71 of the XLFORUM http://xlforum.net/forums/showthread.php?t=2000541)) ||1972 "low" version seat casting wing. ((photo courtesy of Ebay seller, rusty_dusty_parts, [[https://www.ebay.com/str/bialystreasures?_trksid=p2047675.l2563|Link to Ebay store:]] ))| | + | | 1971 XLCH (w/ Buddy Seat) key switch and coil locations. ((photos by The Doctor 71 of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/187269-location-of-ignition-switch-on-1971-xlch?t=2000541)) ||1972 "low" version seat casting wing. ((photo courtesy of Ebay seller, rusty_dusty_parts, [[https://www.ebay.com/str/bialystreasures?_trksid=p2047675.l2563|Link to Ebay store:]] ))| |
| |{{:techtalk:ih:body:key_switch_and_coil_-_1971_xlch_w_buddy_seat_pic1_by_the_doctor_71.jpg?direct&300|}}|{{:techtalk:ih:body:key_switch_and_coil_-_1971_xlch_w_buddy_seat_pic2_by_the_doctor_71.jpg?direct&300|}}|{{:techtalk:ih:body:seat_casting_wing_1972_xlh_low_by_rusty_dusty_motorcycle_parts.jpg?direct&300|}}| | |{{:techtalk:ih:body:key_switch_and_coil_-_1971_xlch_w_buddy_seat_pic1_by_the_doctor_71.jpg?direct&300|}}|{{:techtalk:ih:body:key_switch_and_coil_-_1971_xlch_w_buddy_seat_pic2_by_the_doctor_71.jpg?direct&300|}}|{{:techtalk:ih:body:seat_casting_wing_1972_xlh_low_by_rusty_dusty_motorcycle_parts.jpg?direct&300|}}| | ||
| - | |||
| ===== Oil Tank Bracket (XLCH) ===== | ===== Oil Tank Bracket (XLCH) ===== | ||
| Line 140: | Line 137: | ||
| According to [[https://www.harleykmodel.com/technical/numbers/index.html|Harley K Model site]], 1952 K model frames don't have date codes, and only the last few months of 1953 had them. \\ | According to [[https://www.harleykmodel.com/technical/numbers/index.html|Harley K Model site]], 1952 K model frames don't have date codes, and only the last few months of 1953 had them. \\ | ||
| So roughly in L1953 is when date codes first appeared. \\ | So roughly in L1953 is when date codes first appeared. \\ | ||
| - | The date code reflects when the frame was made, not when bike was assembled. ((thefrenchowl of the XLFORUM http://xlforum.net/forums/showthread.php?t=1002752)) Therefore it is yet just another tool to distinguish between year models. \\ | + | The date code reflects when the frame was made, not when the bike was assembled. ((thefrenchowl of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/108813-old-style-iron-head-frames-1952-to-1978?t=1002752)) Therefore it is yet just another tool to distinguish between year models. \\ |
| 1970-1972 (and possibly later frames) still have date stamping numbers but they are not normally used to distinguish the year of the frame. \\ | 1970-1972 (and possibly later frames) still have date stamping numbers but they are not normally used to distinguish the year of the frame. \\ | ||
| Line 148: | Line 145: | ||
| 1957-1969 models DO NOT have VIN numbers. So to chase down the year model of the frame, several methods of deducing must be done. \\ | 1957-1969 models DO NOT have VIN numbers. So to chase down the year model of the frame, several methods of deducing must be done. \\ | ||
| Generally, on the seat casting ear for the gas tank mount on the right hand side, you'll see a letter and digit. \\ | Generally, on the seat casting ear for the gas tank mount on the right hand side, you'll see a letter and digit. \\ | ||
| - | The letter is the month, the digit is the year. Example; C6 = March of 1966, , C7 = March 1957 or March 1967 frame. \\ | + | Sometimes the code is stamped (letter/digit or digit/letter). The letter is the month, the digit is the year. \\ |
| - | Sometimes the code is stamped the other way around (letter/digit or digit/letter). \\ | + | |
| - | However, this is not the only number that matters for dating the frame. | + | However, this is not the only number that matters for dating the frame. \\ |
| You can distinguish the 57-59 frames from the 67-69 by the seat castings, which are quite different. \\ | You can distinguish the 57-59 frames from the 67-69 by the seat castings, which are quite different. \\ | ||
| - | Each frame would have uniquely identifiable features also. ((Magneto Sportster of the XLFORUM http://xlforum.net/forums/showthread.php?p=5577614&highlight=seat+cast+number#post5577614)) \\ | + | Each frame would have uniquely identifiable features also. ((Magneto Sportster of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/190812-54-k-frame?highlight=seat+cast+number#post4113178)) \\ |
| Harley switched production over to the new model year in late summer. So a frame manufactured in November of 1953 would have been used on a 1954 K Model. \\ | Harley switched production over to the new model year in late summer. So a frame manufactured in November of 1953 would have been used on a 1954 K Model. \\ | ||
| The 1954's were already showing up in dealerships by November of '53 and etc. \\ | The 1954's were already showing up in dealerships by November of '53 and etc. \\ | ||
| Line 161: | Line 158: | ||
| 1958 XL, XLH, XLC and XLCH were the street bikes produced. \\ | 1958 XL, XLH, XLC and XLCH were the street bikes produced. \\ | ||
| 1959 XL, XLH and XLCH were the only street bikes produced. \\ | 1959 XL, XLH and XLCH were the only street bikes produced. \\ | ||
| - | So if you have a J7 XLCH frame (XLCH wasn't made in 1957 so) it is an October 1967 date code which dates it being made in the 1968 production year. \\ | ||
| | **1957-1972 Seat Casting Date Code - Month and Year** |||||||| | | **1957-1972 Seat Casting Date Code - Month and Year** |||||||| | ||
| - | |**A**|January|**G**|July|**0** *|1960 or 1970|**6**|1966| | + | |**A**|January|**G**|July|**0**|1960 or 1970|**6**|1966| |
| - | |**B**|February|**H**|August|**1** *|1961 or 1971|**7** *|1957 or 1967| | + | |**B**|February|**H**|August|**1**|1961 or 1971|**7**|1957 or 1967| |
| - | |**C**|March|**I**|September|**2** *|1962 or 1972|**8** *|1958 or 1968| | + | |**C**|March|**I**|September|**2**|1962 or 1972|**8**|1958 or 1968| |
| - | |**D**|April|**J**|October|**3**|1963|**9** *|1959 or 1969| | + | |**D**|April|**J**|October|**3**|1963|**9**|1959 or 1969| |
| - | |**E**|May|**K**|November|**4**|1964| * requires further \\ identification || | + | |**E**|May|**K**|November|**4**|1964| || |
| |**F**|June|**L**|December|**5**|1965|:::|| | |**F**|June|**L**|December|**5**|1965|:::|| | ||
| - | + | \\ | |
| - | The first two pics below also show a hole thru the backbone in front of the seat bracket for the small gas tank. \\ If that hole has a sleeve in it, it's an XLCH frame (or at least that portion of the backbone is). ((Moon Wolf of the XLFORUM http://xlforum.net/forums/showthread.php?t=1951365&page=2)) \\ The XLH had no hole there originally and if someone drilled it, it is not likely to have the sleeve. | + | |
| - | + | ||
| - | * In the first example pic below, a J7 on an XLCH frame would indicate 1967 since XLCH wasn't made until 1958. | + | |
| - | * In the second pic, the A9 was further diagnosed to a 1969 frame. | + | |
| - | * The third pic below is of a 6B stamp which is the same as B6 - February 1966. | + | |
| - | * The fourth pic is 7L stamped upside down which is the same as L7 - December 1957 | + | |
| - | * The fifth pic is stamped C1 on a 1971 XLCH. | + | |
| - | + | ||
| - | {{:techtalk:ih:body:seat_cast_date_code_j_7_by_animalhouse2010.jpg?direct&300|}} ((photo courtesy of Ebay seller, animalhouse2010, [[https://www.ebay.com/str/animalhouse2010?_trksid=p2047675.l2563|Link to Ebay store:]] )) {{:techtalk:ih:body:seat_cast_date_code_a_9_by_animalhouse2010.jpg?direct&300|}} ((photo courtesy of Ebay seller, animalhouse2010, [[https://www.ebay.com/str/animalhouse2010?_trksid=p2047675.l2563|Link to Ebay store:]] )) {{:techtalk:ih:body:seat_cast_date_code_6_b_by_atomrotten.jpg?direct&300|}} ((photo by atomrotten of the XLFORUM http://xlforum.net/forums/showthread.php?t=647991)) \\ | + | |
| - | + | ||
| - | {{:techtalk:ih:body:seat_cast_date_code_7_l_by_akchopper.jpg?direct&300|}} ((photo by akchopper of the XLFORUM http://xlforum.net/forums/showthread.php?p=5894688#post5894688)) {{:techtalk:ih:body:seat_cast_date_code_c_1_by_the_doctor71.jpg?direct&300|}} ((photo by The Doctor71 of the XLFORUM)) \\ | + | |
| ====== Seat Posts ====== | ====== Seat Posts ====== | ||
| Line 196: | Line 181: | ||
| **Attachments to XLC, XLCH Seat Posts**: | **Attachments to XLC, XLCH Seat Posts**: | ||
| - | * 1958-1965 XLC, XLCH have no bosses or brackets for coil or regulator mounts. ((GA_Ironhead of the XLFORUM http://xlforum.net/forums/showthread.php?t=1543545&page=2)) \\ | + | * 1958-1965 XLC, XLCH have no bosses or brackets for coil or regulator mounts. ((GA_Ironhead of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/142439-frame-casting-id/page2?t=1543545&page=2)) \\ |
| * 1966-1969 XLCH frames: | * 1966-1969 XLCH frames: | ||
| * 1966-1969 CH left seat post has two regulator mounting tabs off the back of the post. (( http://www.harleykmodel.com/technical/index.html)) \\ | * 1966-1969 CH left seat post has two regulator mounting tabs off the back of the post. (( http://www.harleykmodel.com/technical/index.html)) \\ | ||
| Line 211: | Line 196: | ||
| * 1957-1966 XL/XLH and 1958-1969 XLC/XLCH models all have basically straight seat posts. | * 1957-1966 XL/XLH and 1958-1969 XLC/XLCH models all have basically straight seat posts. | ||
| * 1967-up XLH and 1970-up XLCH models have a dogleg (or kick back). | * 1967-up XLH and 1970-up XLCH models have a dogleg (or kick back). | ||
| - | * In 1967, Harley introduced the first electric start Sportster (two years after the Electra Glide). ((GA_Ironhead of the XLFORUM http://xlforum.net/forums/showthread.php?t=1543545&page=2)) Only the XLH model got the upgrade. \\ In order to accommodate it, the seat posts had to be modified to make room for the electric start motor and a much larger battery. \\ So the 1967 XLH had a whole new frame with a big battery, voltage regulator behind the battery and a coil under the seat. ((thefrenchowl of the XLFORUM http://xlforum.net/forums/showthread.php?t=1002752)) \\ | + | * In 1967, Harley introduced the first electric start Sportster (two years after the Electra Glide). ((GA_Ironhead of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/142439-frame-casting-id/page2?t=1543545&page=2)) Only the XLH model got the upgrade. \\ In order to accommodate it, the seat posts had to be modified to make room for the electric start motor and a much larger battery. \\ So the 1967 XLH had a whole new frame with a big battery, voltage regulator behind the battery and a coil under the seat. ((thefrenchowl of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/108813-old-style-iron-head-frames-1952-to-1978?t=1002752)) \\ |
| * In 1970, the XLCH was built using a battery for the first time (smaller battery than the XLH). \\ The XLH and XLCH now shared the same need for the seat posts to be kicked back to accommodate a battery. | * In 1970, the XLCH was built using a battery for the first time (smaller battery than the XLH). \\ The XLH and XLCH now shared the same need for the seat posts to be kicked back to accommodate a battery. | ||
| Line 225: | Line 210: | ||
| |1965-1966 XLH \\ 1967-1969 XLCH|47650-52PA \\ (P above dash) \\ (A below dash)| |47652-52PA \\ (PA below dash)| | |1965-1966 XLH \\ 1967-1969 XLCH|47650-52PA \\ (P above dash) \\ (A below dash)| |47652-52PA \\ (PA below dash)| | ||
| |1967-1980 XLH|47650-67|10|47652-67| | |1967-1980 XLH|47650-67|10|47652-67| | ||
| - | |1977 XR-750 ((virgilhilts of the XLFORUM http://xlforum.net/forums/showthread.php?t=1782825))|47650-67|14| | + | |1977 XR-750 ((virgilhilts of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/xr-sportster-motorcycle-talk-xr750-xr1000-xr1200/xr-750/165860-xr750-1977-frame?t=1782825))|47650-67|14| |
| - | |1980 XR-750 ((Streetpro of the XLFORUM http://xlforum.net/forums/showthread.php?t=1782825&page=3))|47650-67| |47652-67| | | + | |1980 XR-750 ((Streetpro of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/xr-sportster-motorcycle-talk-xr750-xr1000-xr1200/xr-750/165860-xr750-1977-frame/page3?t=1782825&page=3))|47650-67| |47652-67| | |
| | Early model tomahawks (47652-52 PA, right) (47652-52 PA, left) ((photos courtesy of Ebay seller, ol7o. [[https://www.ebay.com/sch/ol7o/m.html?item=264987162566&hash=item3db27737c6%3Ag%3AfKsAAOSwNDVf41-T&rt=nc&_trksid=p2047675.l2562|Link to Items for Sale]]: ))|| | | Early model tomahawks (47652-52 PA, right) (47652-52 PA, left) ((photos courtesy of Ebay seller, ol7o. [[https://www.ebay.com/sch/ol7o/m.html?item=264987162566&hash=item3db27737c6%3Ag%3AfKsAAOSwNDVf41-T&rt=nc&_trksid=p2047675.l2562|Link to Items for Sale]]: ))|| | ||
| |{{:techtalk:ih:body:tomahawk_left_47652-52_pa_by_ol7o.jpg?direct&300|}}|{{:techtalk:ih:body:tomahawk_right_47650-52_pa_by_ol7o.jpg?direct&300|}}| | |{{:techtalk:ih:body:tomahawk_left_47652-52_pa_by_ol7o.jpg?direct&300|}}|{{:techtalk:ih:body:tomahawk_right_47650-52_pa_by_ol7o.jpg?direct&300|}}| | ||
| - | |Found on 1967-1969 XLH frame. ((photo by 62 Ironhead of the XLFORUM http://xlforum.net/forums/showthread.php?t=1476377))|Found on XRTT frame ((photo by xlh59 of the XLFORUM http://xlforum.net/forums/showthread.php?t=1386370&page=3))| | + | |Found on 1967-1969 XLH frame. ((photo by 62 Ironhead of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/136081-help-on-identifying-the-year-of-my-frame?t=1476377))|Found on XRTT frame ((photo by xlh59 of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/xr-sportster-motorcycle-talk-xr750-xr1000-xr1200/xr-750/131053-xrtt-low-boy-frame-dimensions/page3?t=1386370&page=3))| |
| |{{:techtalk:ih:body:tomahawk_left_47650-67_by_62_ironhead.jpg?direct&400|}}|((photo by 62 Ironhead of the XLFORUM)) {{:techtalk:ih:body:tomahawk_left_xrtt_by_xlh59.jpg?direct&400|}}| \\ | |{{:techtalk:ih:body:tomahawk_left_47650-67_by_62_ironhead.jpg?direct&400|}}|((photo by 62 Ironhead of the XLFORUM)) {{:techtalk:ih:body:tomahawk_left_xrtt_by_xlh59.jpg?direct&400|}}| \\ | ||
| - | |||
| ====== Lower Frame Tubes ====== | ====== Lower Frame Tubes ====== | ||
| Line 240: | Line 224: | ||
| * 1957-1976, lower tubes (both) are straight tubes. \\ | * 1957-1976, lower tubes (both) are straight tubes. \\ | ||
| * 1977-1981, lower right tube is notched (pressed) to allow the (new in 77) gerotor style oil pump to be removed and installed without removing the engine. | * 1977-1981, lower right tube is notched (pressed) to allow the (new in 77) gerotor style oil pump to be removed and installed without removing the engine. | ||
| - | * 1982-1985, both lower tubes changed. The engine got shifted to the left slightly and the lower tubes were massaged to accomofated the engine shift. | + | * 1982-1985, both lower tubes changed. The engine got shifted to the left slightly and the lower tubes were massaged to accomodate the engine shift. |
| * The left tube was dimpled on the inside track near the engine to allow the engine to move toward the left and not bind into the frame. | * The left tube was dimpled on the inside track near the engine to allow the engine to move toward the left and not bind into the frame. | ||
| * The right divot was "cupped" instead of the pressed look to allow the oil pump to lower after the engine shift. | * The right divot was "cupped" instead of the pressed look to allow the oil pump to lower after the engine shift. | ||
| Line 246: | Line 230: | ||
| {{:techtalk:ih:body:lower_frame_tubes_1957-1976_sportsters_by_animalhouse2010.jpg?direct&300|}} ((photo courtesy of Ebay seller, animalhouse2010, [[https://www.ebay.com/str/animalhouse2010?_trksid=p2047675.l2563|Link to Ebay store:]] )) {{:techtalk:ih:body:lower_frame_tubes_1977-1981_by_duffspowersports.jpg?direct&300|}} ((photo courtesy of Duffs Powersports, [[https://www.ebay.com/str/duffspowersports|Link to Ebay Store]]: )) \\ | {{:techtalk:ih:body:lower_frame_tubes_1957-1976_sportsters_by_animalhouse2010.jpg?direct&300|}} ((photo courtesy of Ebay seller, animalhouse2010, [[https://www.ebay.com/str/animalhouse2010?_trksid=p2047675.l2563|Link to Ebay store:]] )) {{:techtalk:ih:body:lower_frame_tubes_1977-1981_by_duffspowersports.jpg?direct&300|}} ((photo courtesy of Duffs Powersports, [[https://www.ebay.com/str/duffspowersports|Link to Ebay Store]]: )) \\ | ||
| - | {{:techtalk:ih:body:lower_frame_tubes_1982-1985_by_turboglh.jpg?direct&300|}} ((photo by TurboGLH of the XLFORUM http://xlforum.net/forums/showthread.php?t=2000568)) {{:techtalk:ih:body:lower_frame_tubes_1983-1985_by_kp-antiques-and-collectables.jpg?direct&300|}} ((photo courtesy of Ebay seller, kp-antiques-and-collectables. [[https://www.ebay.com/str/parkwayjewelry|Link to Ebay Store]]: )) \\ | + | {{:techtalk:ih:body:lower_frame_tubes_1982-1985_by_turboglh.jpg?direct&300|}} ((photo by TurboGLH of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/187293-spun-tapered-crank-bearings-repair-questions-and-pics?t=2000568)) {{:techtalk:ih:body:lower_frame_tubes_1983-1985_by_kp-antiques-and-collectables.jpg?direct&300|}} ((photo courtesy of Ebay seller, kp-antiques-and-collectables. [[https://www.ebay.com/str/parkwayjewelry|Link to Ebay Store]]: )) \\ |
| ===== Jiffy Stand Mounts ===== | ===== Jiffy Stand Mounts ===== | ||
| Line 255: | Line 239: | ||
| {{:techtalk:ih:body:jiffy_stand_mount_weld_57-66_h_58-69_ch_sportster_by_animalhouse2010.jpg?direct&300|}} ((photo courtesy of Ebay seller, animalhouse2010, [[https://www.ebay.com/str/animalhouse2010?_trksid=p2047675.l2563|Link to Ebay store:]] )) {{:techtalk:ih:body:jiffy_stand_mount_weld_l67-76_h_70-76_ch_by_vintagepartssuppliers.jpg?direct&300|}} ((photo courtesy of Vintage Parts Suppliers, [[https://www.ebay.com/str/vintagepartssuppliers?_trksid=p2047675.l2563|Link to Ebay Store]], [[https://www.ebay.com/itm/383852297973?ul_noapp=true|Link to Ebay auction at time of posting]] )) \\ | {{:techtalk:ih:body:jiffy_stand_mount_weld_57-66_h_58-69_ch_sportster_by_animalhouse2010.jpg?direct&300|}} ((photo courtesy of Ebay seller, animalhouse2010, [[https://www.ebay.com/str/animalhouse2010?_trksid=p2047675.l2563|Link to Ebay store:]] )) {{:techtalk:ih:body:jiffy_stand_mount_weld_l67-76_h_70-76_ch_by_vintagepartssuppliers.jpg?direct&300|}} ((photo courtesy of Vintage Parts Suppliers, [[https://www.ebay.com/str/vintagepartssuppliers?_trksid=p2047675.l2563|Link to Ebay Store]], [[https://www.ebay.com/itm/383852297973?ul_noapp=true|Link to Ebay auction at time of posting]] )) \\ | ||
| - | {{:techtalk:ih:body:jiffy_stand_mount_1979-1981_sportster_by_ironsporty79.jpg?direct&300|}} ((photo by IronSporty79 of the XLFORUM http://xlforum.net/forums/showthread.php?p=5760655#post5760655)) {{:techtalk:ih:body:jiffy_stand_mount_1982-e1984_sportster.jpg?direct&300|}} ((pic used with permission)) \\ | + | {{:techtalk:ih:body:jiffy_stand_mount_1979-1981_sportster_by_ironsporty79.jpg?direct&300|}} ((photo by IronSporty79 of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/197302-79-sportster-kick-stand-jiffy-stand-spring#post4316928)) {{:techtalk:ih:body:jiffy_stand_mount_1982-e1984_sportster.jpg?direct&300|}} ((pic used with permission)) \\ |
| \\ | \\ | ||
