IH: Body Parts - Sportsterpedia

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
[[:techtalk:menu|{{  :techtalk:gototechnicalmenu.jpg|}}]]
====== IH: Body Parts ======
====== FUEL TANKS ======

<font 14px/Arial, , ;;#800000>☚-----------------</font>      <font 13px/Arial, , ;;#FF0000;;>**ALSO CHECK OUT THE TANKS IN THE**</font>   [[gallery:tankart01| GAS TANK GALLERY]]   <font 14px/Arial, , ;;#800000>—----------—-☛</font>
===== Fuel Cap =====

  * All 1983 XL/FXR models produced after VIN (1HD1CCH17DY113282) and FL/FX models produced after VIN (1HD1AKK16DY011657) use a new low pressure fuel tank cap. The vent relief pressure has been reduced on the screw type fuel caps by utilizing a softer spring. ((HD Service Bulletin #M-859 dated October 29, 1982))
  * The low pressure cap was suggested for use on any 1982 FXR/FXRS or any early build 1983 model, except FLT/FLHT, produced before the above VINs that experiences a lean condition (carburetor spit, poor performance or surging). which should  eliminate  the  problem. No labor was be paid to the dealer for changing out the caps upon servicing. 
    * The new low pressure cap (61060-82A)for FXR/FXRS can be identified while viewing the inside as having 4 veins (or spokes) instead of 8 with the high pressure cap (61060-82).
    * For all other models, the new low pressure cap (61102-83A) can be identified by pressing down on the relief vent with a pencil, pen etc. The low pressure cap has a weaker spring than the high pressure cap (61102-83) beneath the relief vent in the center and the difference in spring pressure can be felt.


===== Petcock (or Fuel Outlet) =====

^Petcock Changes Per Year ((1952-1957 HD Spare Parts Catalog for all Sportster and K Models pg 48)) ((1952-1959 HD Spare Parts Catalog for all Sportsters and K Models pg 60)) ((1953-1963 HD Parts Catalog for Sportsters and KH Models pg 67)) ((1964 HD Parts Catalog Supplement for Sportster and KH Models)) ((1957-1965 Sportster / KH Model Parts Catalog pg 68)) ((1957-1967 Sportster / KH Model Parts Catalog pg 71)) ((1954-1976 HD Sportster Parts Catalog pg 115)) ((1979 HD Sportster Parts Catalog pg 65)) ((1979-1980 HD Sportster Parts Catalog pg 73)) ((1979-1981 HD Sportster Parts Catalog pg 87)) ((1979-1982 HD Sportster Parts Catalog pg 95)) ((1979-1983 HD Sportster Parts Catalog pg 93)) ((1979-1984 HD Sportster Parts Catalog pg 99)) ((1979-1985 HD Sportster Parts Catalog pg 103))^^^
|52-56 All K Models|62125-50|Fuel valve assembly, wingnut handle, vertical outlet, no reserve|
|58 XLC \\ 58-61 XLCH|61601-54|Strainer (only) with a 45° fuel outlet - no valve|
|62-64 XLCH|61601-62|Strainer (only) with a vertical fuel outlet - no valve|
|57-68 XL/XLH \\ 65-68 XLCH|62125-55|Fuel valve assembly, wingnut handle, vertical fuel outlet, no reserve|
|69-74 XL/XLH|62125-55B|Fuel valve assembly, wingnut handle, vertical outlet, no reserve \\ Retrofit to 57-74 XL/XLH, 65-74 XLCH ((1954-1976 HD Sportster Parts Catalog pg 115))|
|75 XLH/XLCH|62160-75 ((1975 HD Sportster Parts Catalog Supplement))|Fuel valve assembly, single pull handle, vertical fuel outlet, no reserve|
|E76 XLH/XLCH|62163-75 ((1976 HD Sportster Parts Catalog Supplement))|Fuel valve assembly, single pull handle, vertical fuel outlet using Bendix carb, no reserve, ((1954-1978 HD Sportster Parts Catalog Supplement)) \\ Retrofit to 75 models ((1954-1976 HD Sportster Parts Catalog pg 115))|
|L76-80 XLH/XLCH/XLS|62164-76|Fuel valve assembly, single pull handle, horizontal fuel outlet using Keihin carb, no reserve ((1954-1978 HD Sportster Parts Catalog Supplement))|
|80 XLS|62165-77|Fuel valve assembly, single pull handle, horizontal fuel outlet, no reserve|
|81-85 XLS \\ 84-85 XLH|62167-81|Fuel valve assembly, single pull handle, horizontal fuel outlet with reserve tube \\ These two part numbers were available for parts order for 81-85 XLH or XLS|
|81-83 XLH \\ 83-85 XLX|62169-81|:::|


|{{:techtalk:ih:body:58-61_xlch_fuel_strainer_by_scoobydo.jpg?direct&400|}}|
|  58 XLC / 58-61 XLCH Fuel Tank Strainer (61601-54)  ((photo by scoobydo of the XLFORUM http://xlforum.net/forums/showthread.php?t=1023743&highlight=fuel+strainer+xlch))  |

**Inspection** \\ 
You can inspect the screen / filter with a flashlight thru the filler hole in the top of the tank to determine if it needs cleaning or repair. \\ 
If the filter is OK, you can inspect / rebuild the petcock without uninstalling it from the fuel tank. ((IronMick of the XLFORUM http://xlforum.net/forums/showthread.php?t=1583571))

====== Mounting Brackets ======

Below is a "U" shaped bracket used on 1982 XLS and E1983 XL models. \\
There were two different part numbers for the bracket (82 XLS 61036-82 and E83 XL 61036-82A). \\
The only visual difference appears to be the inside weld of the rubber mount stud. \\
However, either part number will work for these models. \\

{{:techtalk:ih:body:gas_tank_bracket_1982-e1983_xls-xl_pic10_by_tomscybershop.jpg?direct&300|}} ((photo courtesy of TomsCyberShop www.TomsCyberShop.com)) {{:techtalk:ih:body:gas_tank_bracket_1982-e1983_xls-xl_pic12_by_tomscybershop.jpg?direct&300|}} ((photo courtesy of TomsCyberShop www.TomsCyberShop.com)) \\

\\
[[:techtalk:menu|{{:techtalk:gototechnicalmenu.jpg|}}]]
Trace: • IH: Engine Mechanicals - Sub-01G • IH: Engine Mechanicals - Sub-09G • IH: Electrical System • REF: Tools - 172 • REF: Tools - 115 • IH: Engine Mechanicals - Sub-09U • EVO: Suspension • IH: Engine Control - Sub-01E • REF: Tools - 120 • MiscRes: Magazine Articles - Menu