Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revision Both sides next revision
techtalk:ih:body04 [2017/07/19 01:39]
hippysmack [HANDLEBARS]
techtalk:ih:body04 [2018/02/11 17:17]
hippysmack
Line 55: Line 55:
 |XLX-61|1983-1985|(56085-83) (black only) ((HD 1979-1985 Sportster Parts Catalog pg 97))| |XLX-61|1983-1985|(56085-83) (black only) ((HD 1979-1985 Sportster Parts Catalog pg 97))|
  
-right side bars with no switch holes were used on all:  +===== Additional Handlebar Information ===== 
-k, kk, kh, khk, kr, krm, khrm. +Right side bars with no switch holes were used on all: \\  
-also the were used on all xl and xlh prior to 67 provide the bike wasnt fitted with factory directionals. +k, kk, kh, khk, kr, krm, khrm. \\ 
-and  +Also the were used on all xl and xlh prior to 67 provide the bike wasnt fitted with factory directionals. ​\\ 
-all 70-72 xlch without directionals. +And all 70-72 xlch without directionals. ​\\ 
-all 1973. +All 1973. \\ 
-so no switch right side bars are very common.+So no switch right side bars are very common. ​\\
  
-conversely +Conversely, ​the bikes that did use right side switches are \\ 
-the bikes that did use right side switches are +59-69 xlch (button as kill) \\ 
-59-69 xlch (button as kill) +67-72 xlh \\ 
-67-72 xlh +70-72 xlch with directionals. ​\\
-70-72 xlch with directionals. +
-------------------------------------------------------------- +
-for the stickies, a post i originally submitted to a different venue:+
  
  
-i do believe this covers every production bar 52-73. 
  
-as far as factory fitments: +'​52-'​73. \\ 
-67> is pretty clear by using part cat listings +As far as factory fitments: ​\\ 
-66< not so much. +67> is pretty clear by using part cat listings ​\\ 
-for example long bars were fitted up to at least 1960 probl by dealer order, book says e57. +66< not so much. \\ 
-speedsters ​on 66ch is real, but the book realy dont address the right side correctly.+For example long bars were fitted up to at least 1960 probl by dealer order, book says e57. \\ 
 +Speedsters ​on 66ch is real, but the book realy dont address the right side correctly. ​\\
  
-in the following +**In the followingls= left side rs= right side** \\
-ls= left side +
-rs= right side+
  
-long bars (high bucks) +**Long Bars** ​(high bucks) 
-56083-52 rs +|56083-52 rs| 
-56084-52 ls +|56084-52 ls| 
-52 only. uses grip retention collars+|52 only. uses grip retention collars
 +|56083-53 rs no switch holes| 
 +|56083-58 rs direction switch holes| 
 +|56083-53 ls horn and hi-low|
  
-56083-53 rs no switch holes +**Speedsters** 
-56083-58 rs direction switch holes +|56085-53 ls horn and hi-low, twist grip| 
-56083-53 ls horn and hi-low +|56085-65 ls horn and hi-low, no twist grip| 
---------------------------------------------------- +|56086-53 rs no holes| 
-speedsters +|56086-58 rs directional| 
-56085-53 ls horn and hi-low, twist grip +|56065-66? (66ch) rs kill button. ​\\ part number is unsure. could also be 56086-53a.|
-56085-65 ls horn and hi-low, no twist grip +
-56086-53 rs no holes +
-56086-58 rs directionals +
-56065-66? (66ch) rs kill button. part number is unsure. could also be 56086-53a.+
  
---------------------------------------------------- 
-buckhorns 
-56069-70 rs directionals only 
-56078-67 rs starter and directionals 
-56078-69a rs starter and directionals. drilled for front brake lite wires. 
-56083-57 rs no holes 
-56083-65 rs kill button. 
-56083-69a rs kill & drilled for front brake lite wires. 
-56093-70 rs no holes (may be same as 56083-57) 
  
-56084-57 ls horn & hi-low, twist grip. +**Buckhorns** 
-56084-65 ls horn & hi-low, no twist grip.+|56069-70 rs directionals only| 
 +|56078-67 rs starter and directional| 
 +|56078-69a rs starter and directionals. \\ drilled for front brake lite wires.| 
 +|56083-57 rs no holes| 
 +|56083-65 rs kill button.| 
 +|56083-69a rs kill & drilled for front brake lite wires.| 
 +|56093-70 rs no holes (may be same as 56083-57)| 
 +|56084-57 ls horn & hi-low, twist grip.| 
 +|56084-65 ls horn & hi-low, no twist grip.|
  
----------------------------------------------------- 
-xl bars 
-56081-68 ls horn, hi-low, twist grip 
-56087-68 ls horn, hi-low, no twist grip 
-56085-68 rs starter, directionals 
-56086-69 rs starter, directionals hole for front brake lite wires. 
-56089-69 rs kill button. 
  
----------------------------------------------------- +**XL Bars** 
-laconias/sport +|56081-68 ls horn, hi-low, twist grip| 
-56087-58 ls (kill 58ch) horn and twist grip capable. ​used immolbizing spacer 56227-53. +|56087-68 ls horn, hi-low, no twist grip| 
-56087-58a ls horn, no twist capable. +|56085-68 rs starter, directionals| 
-56087-63 ls horn, hi-low, no twist. +|56086-69 rs starter, directionals hole for front brake lite wires.| 
-56087-65 ls horn, hi-low, twist grip.+|56089-69 rs kill button.| 
 + 
 + 
 +**Laconias/Sport** 
 +|56087-58 ls (kill 58ch) horn and twist grip capable. ​\\ Used immolbizing spacer 56227-53.| 
 +|56087-58a ls horn, no twist capable.| 
 +|56087-63 ls horn, hi-low, no twist.| 
 +|56087-65 ls horn, hi-low, twist grip.| 
 +|56068-70 rs directional| 
 +|56082-70 rs no holes| 
 +|56085-67 rs starter, directional| 
 +|56085-69a rs starter, directionals,​ hole for front brake lite wire| 
 +|56088-58 rs no holes.| 
 +|56088-59 rs kill or starter| 
 +|56088-69a rs starter drilled for front brake lite wires.| 
 +|56088-59 rs kill button.| 
 + 
 +73 was the half and half year. \\ 
 +the only bars were bucks, and they still had the internal throttle (last yr for this). \\ 
 +but \\ 
 +the switches were now in the perches. and the wire ran along (rather than inside) the bar. \\ 
 +so \\ 
 +73 was the only year with internal throttle and external switches / wiring. \\ 
 + 
 +To identify these bars: 
 +|56083-73 rs two 1/8" holes along the underside of bar \\ to accept spring clips that held the wires.| 
 +|56084-73 ls two 1/8" holes along the underside of bar \\ to accept spring clips that held the wires.| 
 + 
 +The one pc stainless bars with the external throttle debuted in 74.
  
-56068-70 rs directionals 
-56082-70 rs no holes 
-56085-67 rs starter, directionals 
-56085-69a rs starter, directionals,​ hole for front brake lite wire 
-56088-58 rs no holes. 
-56088-59 rs kill or starter 
-56088-69a rs starter drilled for front brake lite wires. 
-56088-59 rs kill button. 
  
-73 was the half and half year. 
-the only bars were bucks, and they still had the internal throttle (last yr for this). 
-but 
-the switches were now in the perches. and the wire ran along (rather than inside) the bar. 
-so 
-73 was the only year with internal throttle and external switches / wiring. 
  
-to identify these bars: 
-56083-73 rs two 1/8" holes along the underside of bar to accept spring clips that held the wires. 
-56084-73 ls two 1/8" holes along the underside of bar to accept spring clips that held the wires. 
  
-the one pc stainless bars with the external throttle debuted in 74. 
  
  
 \\ \\
 [[:​techtalk:​menu|{{:​techtalk:​gototechnicalmenu.jpg|}}]] [[:​techtalk:​menu|{{:​techtalk:​gototechnicalmenu.jpg|}}]]