Differences

This shows you the differences between two versions of the page.

--- techtalk:ih:engctl01b [2022/03/30 05:18]
hippysmack [Mounting Adapters]
+++ techtalk:ih:engctl01b [2022/03/31 02:28]
hippysmack [Bearing and Support Housing]
@@ Line 24: / Line 24: @@
 **Cam Cover to Adapter Gasket**: \\
 -E1965 adapters use gasket (32522-37). ((DR Dick of the XLFORUM http://xlforum.net/forums/showthread.php?t=1637862&page=4)) \\
+The parts catalogs say the gasket was available for 1958-1969 XLCH. \\
 However, gaskets are known to lose their structural integrity (used on movable mount systems) resulting in the hub working loose from the cover. \\
 HD got away from the gasket in mid 1965 for this reason. \\
@@ Line 35: / Line 36: @@
 Uses #12-24 x 15/32" countersunk flat slot head screws (1865W) to hold plate to cam cover. \\
-**Fixed Position Magnetos**: \\
+**Fixed Position Magneto Adapters**: \\
 **1958-E1962**: \\
 Used with magneto (29504-48A). \\
@@ Line 51: / Line 52: @@
 Uses tach drive mag and SEAL STYLE A. Uses gasket between the mount plate and cover surface. \\
-**Adjustable Magnetos**: \\
+**Adjustable Magneto Adapters**: \\
+A lot of parts got modified by owners over the years so you could have something that don't match the descriptions below. ((Dr Dick of the XLFORUM http://xlforum.net/forums/showthread.php?t=1130489)) \\
+These are the basics to the OEM moveable mount hubs: \\
+Plain hub (no counterbore or slot) = E1965 \\
+Counterbored (only) = L1965-E1967 \\
+Counterbored and slotted = L1967-E1968 \\
+Slotted (only) = L1968-1969 \\
 **E1965**: \\
@@ Line 102: / Line 109: @@
 |{{:techtalk:ih:engctl:1965l-e1967_xlch_magneto_mounting_plates_by_dr_dick.jpg?direct&300|}}|{{:techtalk:ih:engctl:1967l-e1968_xlch_magneto_adapters_by_dr_dick.jpg?direct&300|}}|{{:techtalk:ih:engctl:1965-1969_xlch_upper_magneto_adapter_hub_dims_by_dr_dick.jpg?direct&300|}}|
-L1968-1969 Upper Magneto Adapter (29600-65C) came with oil seal: ((photos courtesy of Ebay seller, jrsvintageharley1990. [[https://www.ebay.com/str/jrsvintageharleyparts?_trksid=p2047675.l2563|Link to Ebay Store]] )) \\
+L1968-1969 Upper Magneto Adapter (29600-65C) came with oil seal: ((photos courtesy of Ebay seller, jrsvintageharley1990. [[https://www.ebay.com/str/jrsvintageharleyparts?_trksid=p2047675.l2563|Link to Ebay Store]] )), 1965-1969 Lower Adapter to the right ((photo courtesy of TomsCyberShop.com www.TomsCyberShop.com)) \\
-{{:techtalk:ih:engctl:1968l-1969_upper_magneto_adapter_plate_and_oil_seal_29600-65c_by_jrsvintageharley1990_pic1.jpg?direct&300|}} {{:techtalk:ih:engctl:1968l-1969_upper_magneto_adapter_plate_and_oil_seal_29600-65c_by_jrsvintageharley1990_pic2.jpg?direct&300|}}  \\
+{{:techtalk:ih:engctl:1968l-1969_upper_magneto_adapter_plate_and_oil_seal_29600-65c_by_jrsvintageharley1990_pic1.jpg?direct&300|}} {{:techtalk:ih:engctl:1968l-1969_upper_magneto_adapter_plate_and_oil_seal_29600-65c_by_jrsvintageharley1990_pic2.jpg?direct&300|}}  {{:techtalk:ih:engctl:1965-1969_magneto_lower_mounting_adapter_by_toms_cyber_shop.jpg?direct&300|}} \\
+====== Bearing and Support Housing ======
+From 1958-1969, these parts had the same part number but the bearing support was factory modded several times. \\
+Bearing support (29561-55) \\
+Rotor cam end (upper) bearing (29562-59) \\
+Rotor shaft end (lower) bearing (29563-59) \\
+Upper bearing plate differences provided by Dr Dick ((http://xlforum.net/forums/showthread.php?t=1062720&page=26)) \\
+{{:techtalk:ih:engctl:1957-1969_magneto_bearing_supports_by_dr_dick.jpg?direct&400|}} \\
 ====== Keyed Mags ======
@@ Line 165: / Line 180: @@
 |{{:techtalk:ih:engctl:mag_cable_1_by_kenfused.jpg?direct&300|}}|{{:techtalk:ih:engctl:mag_cable_2_by_kenfused.jpg?direct&300|}}|
+====== Various Documentation ======
+**Instructions for the Joe Hunt Early Sportster Magneto**: \\
+Click on a pic to enlarge: ((photos from this post from Chevelle of the XLFORUM http://xlforum.net/forums/showthread.php?t=1391033)) \\
+{{:techtalk:ih:engctl:ins-magneto-joe_hunt_early_sportster_pic1.jpg?direct&400|}} {{:techtalk:ih:engctl:ins-magneto-joe_hunt_early_sportster_pic2.jpg?direct&400|}} \\
+{{:techtalk:ih:engctl:ins-magneto-joe_hunt_early_sportster_pic3.jpg?direct&400|}} {{:techtalk:ih:engctl:ins-magneto-joe_hunt_early_sportster_pic4.jpg?direct&400|}} \\
+----
+====== Related Links ======
+….[[https://morrismagneto.com/|Link to Morris Magneto.com]]
 \\

Trace:

Differences

Navigation

Search

Toolbox