Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision | Next revision Both sides next revision | ||
|
techtalk:ih:engctl03 [2017/10/30 04:29] hippysmack [Kick Starter] |
techtalk:ih:engctl03 [2017/10/30 04:31] hippysmack [Kick Starter] |
||
|---|---|---|---|
| Line 4: | Line 4: | ||
| ====== Kick Starter ====== | ====== Kick Starter ====== | ||
| - | * Starting July 1, 1973, there was a new design with kick starter ratchet gear, bushing and spacer. The new 'pressed in' bushing has a Teflon coated lead bearing surface on a steel ball shell. The gear has a groove for the starter gear spring and the spacer length (and diameter) were increased to fit the new gear. ((HD Service Bulletin #618C as updated December 17, 1974)) | + | * Starting July 1, 1973, there was a new design with a kick starter ratchet gear, bushing and spacer. The new 'pressed in' bushing has a Teflon coated lead bearing surface on a steel ball shell. The gear has a groove for the starter gear spring and the spacer length (and diameter) were increased to fit the new gear. ((HD Service Bulletin #618C as updated December 17, 1974)) |
| * The new ratchet gear assembly w / Teflon bushing was recommended for part replacement on all models built previous to July 1, 1973. However, these parts will not interchange with the old part numbers individually so the full replacement kit is recommended as an assembly. ((HD Service Bulletin #618C as updated December 17, 1974)) | * The new ratchet gear assembly w / Teflon bushing was recommended for part replacement on all models built previous to July 1, 1973. However, these parts will not interchange with the old part numbers individually so the full replacement kit is recommended as an assembly. ((HD Service Bulletin #618C as updated December 17, 1974)) | ||
