Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
techtalk:ih:engctl03 [2020/04/30 20:23]
hippysmack [Sub-Documents]
techtalk:ih:engctl03 [2020/04/30 20:34] (current)
hippysmack [Sub-Documents]
Line 6: Line 6:
 ===== Sub-Documents ===== ===== Sub-Documents =====
 * . . . [[techtalk:​ih:​engctl03a|1968 Kicker Cover Roll Pin Repair]] \\ * . . . [[techtalk:​ih:​engctl03a|1968 Kicker Cover Roll Pin Repair]] \\
-* . . . [[techtalk:​ih:​engctl03b|1970-1978 Kicker Cover Damage Repair]]+* . . . [[techtalk:​ih:​engctl03b|1977-1978 Kicker Cover Damage Repair]]
  
   * Starting July 1, 1973, there was a new design with a kick starter ratchet gear, bushing and spacer. The new '​pressed in' bushing has a Teflon coated lead bearing surface on a steel ball shell. The gear has a groove for the starter gear spring and the spacer length (and diameter) were increased to fit the new gear. ((HD Service Bulletin #618C as updated December 17, 1974))   * Starting July 1, 1973, there was a new design with a kick starter ratchet gear, bushing and spacer. The new '​pressed in' bushing has a Teflon coated lead bearing surface on a steel ball shell. The gear has a groove for the starter gear spring and the spacer length (and diameter) were increased to fit the new gear. ((HD Service Bulletin #618C as updated December 17, 1974))