Differences
This shows you the differences between two versions of the page.
Both sides previous revision Previous revision Next revision | Previous revision | ||
techtalk:ih:engmech01e [2022/04/03 21:39] hippysmack [Shifter Shaft / Brake Shaft Hole Bushings and Plugs] |
techtalk:ih:engmech01e [2023/12/20 02:24] (current) hippysmack |
||
---|---|---|---|
Line 2: | Line 2: | ||
====== IH: Engine Mechanicals - Sub-01E ====== | ====== IH: Engine Mechanicals - Sub-01E ====== | ||
====== Ironhead Gearcase/Cam Cover Pics and Information ====== | ====== Ironhead Gearcase/Cam Cover Pics and Information ====== | ||
- | \\ | ||
[[techtalk:ih:engmech01g|Click Here]] to go the Ironhead Gearcase/Cam Cover Removal and Installation page in the Sportsterpedia for fastener lists and gaskets. \\ | [[techtalk:ih:engmech01g|Click Here]] to go the Ironhead Gearcase/Cam Cover Removal and Installation page in the Sportsterpedia for fastener lists and gaskets. \\ | ||
+ | |||
+ | ====== Gearcase / Cam Cover Parts List ====== | ||
+ | All part numbers were gathered from period specific Sportster parts catalogs from 1957-1985 including supplement and updated catalogs. \\ | ||
+ | |||
+ | ^{{techtalk:miscres:instruction_sheet_header_4.png?nolink&803|}}||||| | ||
+ | |Year Model|Cam / Gearcase Cover \\ Part Number|Casting Number|Gasket|Shifter \\ Shaft \\ Bushing| | ||
+ | |1952-1956 K Models|25200-52|25202-52|25224-52| | ||
+ | | Notes:|Replaced with 25200-52A in 1963. |||| | ||
+ | |1957-1962 XL/XLH/XLCH|25200-57|25202-52A|25224-52| | ||
+ | | Notes:|Aluminum cover with single horizontal bar and square rear corner (not cut out). \\ Uses generator "daisy wheel" oil deflector w/ sliding separator bushing/spring in cover \\ Replaced by 25200-63A in 1968. |||| | ||
+ | |1963-1966 XLH \\ 1963-1967 XLCH|25200-63|25202-52A|25224-52| | ||
+ | | Notes:|Aluminum cover with single horizontal bar and square rear corner (not cut out). \\ Uses generator slinger washer oil deflector w/ stationary bushing in cover. \\ Replaced by 25200-63A in 1968. |||| | ||
+ | |1967 XLH|25201-67|25202-52A|25224-52| | ||
+ | | Notes:|1966 style single bar aluminum cover with rear cutout added around new starter. \\ Oil tank vent (62375-62) added to the rear of the cover. \\ Replaced by 25201-67A in 1969.|||| | ||
+ | |1968-1969 XLCH|25200-63A|02-68|25224-52| | ||
+ | | Notes:|Aluminum cover with 6 horizontal ribs and square rear corner (not cut out).|||| | ||
+ | |1968-1970 XLH|25201-67A|02-68|25224-52| | ||
+ | | Notes:|Aluminum cover with 6 horizontal ribs and rear cutout for starter.|||| | ||
+ | |1970 XLCH|25200-70|02-68| | | ||
+ | | Notes:|Aluminum cover with 6 horizontal ribs and square rear corner (no cut out). \\ Previous boss for magneto redesigned to accept a circuit breaker. \\ Oil tank vent (62375-57) added to the rear of the cover.|||| | ||
+ | |1971-1972 XLH \\ 1974 XLH|25201-71|71-25202|25224-52| | ||
+ | | Notes:|Polished. |||| | ||
+ | |1971-1972 XLCH \\ 1974 XLCH|25200-71|71-25202|25224-52| | ||
+ | | Notes:| |||| | ||
+ | |1973 XLH|25201-73 \\ black|71-25202|25224-52| | ||
+ | | Notes:| |||| | ||
+ | |1973 XLCH|25200-73 \\ black|71-25202|25224-52| | ||
+ | | Notes:| |||| | ||
+ | |1975-1976 XLH|25211-75|71-25202|25224-52| | ||
+ | | Notes:|Shifter moved to the left side of the bike in 1975.|||| | ||
+ | |1975-1976 XLCH|25205-75|71-25202|25224-52| | ||
+ | | Notes:| |||| | ||
+ | |1977-1978 XL \\ 1978 XLCH|25201-75|76-25202F|25244-52A| | ||
+ | | Notes:| |||| | ||
+ | |1977 XLCH|25200-75|76-25202F|25244-52A| | ||
+ | | Notes:|Replaced by 25201-75 (1978 parts sup).|||| | ||
+ | |1979 XL|25201-79 \\ 25201-79A|79-25202F|25244-52A| | ||
+ | | Notes:|Polished. Original cover has a reed type breather valve assembly (26909-79A). \\ Replaced by 25201-79A which has a deeper boss in the nosecone to mount the ignition. \\ Kit includes a spacer (25262-80) to extend ignition to original location. \\ Rubber plug (25221-77) installed in 1979-E1981 cover.|||| | ||
+ | |1979 XLCH|25200-79|79-25202|25244-52A| | ||
+ | | Notes:|Polished. Original cover has a reed type breather valve assembly (26909-79A). \\ Replaced by 25200-79A which has a deeper boss in the nosecone to mount the ignition. \\ Kit includes a spacer (25262-80) to extend ignition to original location.|||| | ||
+ | |1979 XLS|25205-79 \\ 25205-79A|79-25202|25244-52A| | ||
+ | | Notes:|Gray. Replaced by 25205-79A which has a deeper boss in the nosecone to mount the ignition. \\ Kit includes a spacer (25262-80) to extend ignition to original location.|||| | ||
+ | |1980 XL|25208-80 \\ 25201-79A|80-25222|25244-52A| | ||
+ | | Notes:|Polished|||| | ||
+ | |1980 XLS|25209-80|80-25222|25244-52A| | ||
+ | | Notes:|-80 parts book says, polished. -81 book says black.|||| | ||
+ | |E1981 XL|25227-81|81-25223|25244-52A| | ||
+ | | Notes:|Polished. Angle cut upper feed galley slot. No pins in cam bushings.|||| | ||
+ | |E1981 XLS|25229-81|81-25223|25244-52A| | ||
+ | | Notes:|Black. Angle cut upper feed galley slot.|||| | ||
+ | |L1981-1982 XLS|25209-81|25222-81|25263-81| | ||
+ | | Notes:|Black. Straight cut upper feed galley slot. No casting for tach drive. No pins in cam bushings. \\ 7/16"-14x1/2" allen hd plug screw (2506) installed thru 1985 in place of rubber plug.|||| | ||
+ | |L1981-E1984 XL \\ 1983-E1984 XLS/XLX|25208-81|25222-81|25263-81| | ||
+ | | Notes:|Polished. No casting for tach drive. No pins in cam bushings.|||| | ||
+ | |1983-1985 XLX|25207-83| |25263-81| | ||
+ | | Notes:|Kit w/ aluminum finish. No casting for tach drive.|||| | ||
+ | |L1984 XLX|25207-84|25222-84A|25263-81| | ||
+ | | Notes:|Aluminum finish. Replaced by 25207-84A (-85A parts book)|||| | ||
+ | |L1984 XL/XLS|25208-84|25222-84A|25263-81| | ||
+ | | Notes:|Polished. Replaced by 25219-86 (-85A parts book)|||| | ||
+ | |1985 XLX|25207-84A|25222-84A|25263-81| | ||
+ | | Notes:|Black.|||| | ||
+ | |1985 XL/XLS|25208-84A|25222-84A|25263-81| | ||
+ | | Notes:|Polished. Replaced by 25219-86 (-85A parts book)|||| | ||
====== Internal Comparisons ====== | ====== Internal Comparisons ====== | ||
- | You can interchange some covers if you are not concerned about the look of a stocker for your year bike (better resale trying to stay stock). ((Monte03 of the XLFORUM http://xlforum.net/forums/showthread.php?p=1284165#post1284165)) \\ | + | You can interchange some covers if you are not concerned about the look of a stocker for your year bike (better resale trying to stay stock). ((Monte03 of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/52221-cams-cover-interchange#post1084712)) \\ |
Also be aware that some covers had the round cut out for the electric starter XLH that came out in 1967. \\ | Also be aware that some covers had the round cut out for the electric starter XLH that came out in 1967. \\ | ||
Line 12: | Line 75: | ||
(so the cam cover and the right case half are a match in tolerances) \\ | (so the cam cover and the right case half are a match in tolerances) \\ | ||
- | 52-78 cover had only one breather port at 6:00. ((Dr Dick of the XLFORUM http://xlforum.net/forums/showthread.php?t=1845601&page=2)) \\ | + | 52-78 cover had only one breather port at 6:00. ((Dr Dick of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/172350-77-breather-please-view-pics/page2?t=1845601&page=2)) \\ |
79-85 had two. One at 6:00 and one at 10:00. \\ | 79-85 had two. One at 6:00 and one at 10:00. \\ | ||
52-76 uses .625" pinion bushing bore. \\ | 52-76 uses .625" pinion bushing bore. \\ | ||
77-85 uses .562" pinion bushing bore. \\ | 77-85 uses .562" pinion bushing bore. \\ | ||
- | | 1952-1956 Cam Cover - casting: 25202-52 ((photo by Dr Dick of the XLFORUM http://xlforum.net/forums/showthread.php?t=1845601&page=2)) | 1957-1962 Cam Cover - casting: 25202-52A ((photo by ironheadjunkie of the XLFORUM http://xlforum.net/forums/showthread.php?t=1421916&page=2)) | 1963-1967 Cam Cover - casting: 25202-52A((photo by Dr Dick of the XLFORUM http://xlforum.net/forums/showthread.php?t=1845601&page=2)) | | + | | 1952-1956 Cam Cover - casting: 25202-52 ((photo by Dr Dick of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/172350-77-breather-please-view-pics/page2?t=1845601&page=2)) | 1957-1962 Cam Cover - casting: 25202-52A ((photo by ironheadjunkie of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/132743-oil-line-routing/page2?t=1421916&page=2)) | 1963-1967 Cam Cover - casting: 25202-52A((photo by Dr Dick of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/172350-77-breather-please-view-pics/page2?t=1845601&page=2)) | |
|{{:techtalk:ih:engmech:cam_cover_52-56_by_dr_dick.jpg?direct&300|}}|{{:techtalk:ih:engmech:cam_cover_1_25202-52a_by_ironheadjunkie.jpg?direct&300|}}|{{:techtalk:ih:engmech:cam_cover_63-67_by_dr_dick.jpg?direct&300|}}| | |{{:techtalk:ih:engmech:cam_cover_52-56_by_dr_dick.jpg?direct&300|}}|{{:techtalk:ih:engmech:cam_cover_1_25202-52a_by_ironheadjunkie.jpg?direct&300|}}|{{:techtalk:ih:engmech:cam_cover_63-67_by_dr_dick.jpg?direct&300|}}| | ||
- | | 1968-1970 Cam Cover - casting: 02-68 ((photo by Dr Dick of the XLFORUM http://xlforum.net/forums/showthread.php?t=1845601&page=2)) | 1971-1976 Cam Cover - casting: 25202-71 ((photo by Dr Dick of the XLFORUM http://xlforum.net/forums/showthread.php?t=1845601&page=2)) | 1977-1978 Cam Cover - casting 76-25202F ((photo by DirtyCory of the XLFORUM http://xlforum.net/forums/showthread.php?t=1297584&page=9)) | | + | | 1968-1970 Cam Cover - casting: 02-68 ((photo by Dr Dick of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/172350-77-breather-please-view-pics/page2?t=1845601&page=2)) | 1971-1976 Cam Cover - casting: 25202-71 ((photo by Dr Dick of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/172350-77-breather-please-view-pics/page2?t=1845601&page=2)) | 1977-1978 Cam Cover - casting 76-25202F ((photo by DirtyCory of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/127032-getting-this-78-back-to-the-way-it-should-be/page9?t=1297584&page=9)) | |
|{{:techtalk:ih:engmech:cam_cover_68-70_by_dr_dick.jpg?direct&300|}}|{{:techtalk:ih:engmech:cam_cover_71-76_by_dr_dick.jpg?direct&300|}}|{{:techtalk:ih:engmech:cam_cover_77-78_by_dr_dick.jpg?direct&300|}}| | |{{:techtalk:ih:engmech:cam_cover_68-70_by_dr_dick.jpg?direct&300|}}|{{:techtalk:ih:engmech:cam_cover_71-76_by_dr_dick.jpg?direct&300|}}|{{:techtalk:ih:engmech:cam_cover_77-78_by_dr_dick.jpg?direct&300|}}| | ||
- | | 1979-1980 Cam Cover - casting: 79-25202 ((photo by Dr Dick of the XLFORUM http://xlforum.net/forums/showthread.php?t=1845601&page=2)) | 1981 Cam Cover - casting: 81-25223 ((photo by Scott of the XLFORUM http://xlforum.net/forums/showthread.php?t=2073823)) | L1984-1985 Cam Cover - casting: 25222-84A ((photo by Dr Dick of the XLFORUM http://xlforum.net/forums/showthread.php?t=1845601&page=2)) \\ (no date code below casting) | | + | | 1979-1980 Cam Cover - casting: 79-25202 ((photo by Dr Dick of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/172350-77-breather-please-view-pics/page2?t=1845601&page=2)) | 1981 Cam Cover - casting: 81-25223 ((photo by Scott of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/197215-cam-cover-id-help-please-warning-huge-pics?t=2073823)) | L1984-1985 Cam Cover - casting: 25222-84A ((photo by Dr Dick of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/172350-77-breather-please-view-pics/page2?t=1845601&page=2)) \\ (no date code below casting) | |
|{{:techtalk:ih:engmech:cam_cover_79-80_by_dr_dick.jpg?direct&300|}}|{{:techtalk:ih:engmech:1981_cam_cover_by_scott.jpg?direct&300|}}|{{:techtalk:ih:engmech:cam_cover_l84-85_by_dr_dick.jpg?direct&300|}}| | |{{:techtalk:ih:engmech:cam_cover_79-80_by_dr_dick.jpg?direct&300|}}|{{:techtalk:ih:engmech:1981_cam_cover_by_scott.jpg?direct&300|}}|{{:techtalk:ih:engmech:cam_cover_l84-85_by_dr_dick.jpg?direct&300|}}| | ||
====== 1957-1970 Cam Covers ====== | ====== 1957-1970 Cam Covers ====== | ||
- | 1957 thru 1970 Sportsters had cams designed for an ignition to be mounted on top of the cam cover. ((Monte03 of the XLFORUM http://xlforum.net/forums/showthread.php?t=230843)) \\ | + | 1957 thru 1970 Sportsters had cams designed for an ignition to be mounted on top of the cam cover. ((Monte03 of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/52221-cams-cover-interchange?t=230843)) \\ |
These cams are not interchangeable with post 1971 motors (what can be called the 'cone' cam cover). \\ | These cams are not interchangeable with post 1971 motors (what can be called the 'cone' cam cover). \\ | ||
Early XLs had XL cams, 1966 thru the 1970s had hotter cams known as P cams. \\ | Early XLs had XL cams, 1966 thru the 1970s had hotter cams known as P cams. \\ | ||
Line 34: | Line 97: | ||
P cams are frequently seen for sale on ebay. \\ | P cams are frequently seen for sale on ebay. \\ | ||
When hunting for parts you want to ask, "Pre 1971 or Post 1971" for cams and covers including the sprocket cover. \\ | When hunting for parts you want to ask, "Pre 1971 or Post 1971" for cams and covers including the sprocket cover. \\ | ||
+ | |||
===== 1957-1962 XL/XLH/XLCH Cover ===== | ===== 1957-1962 XL/XLH/XLCH Cover ===== | ||
Part number (25200-57). Casting number is (25202-52A). \\ | Part number (25200-57). Casting number is (25202-52A). \\ | ||
Line 49: | Line 113: | ||
{{:techtalk:ih:engmech:1963-1966_xlh_1963-1967_xlch_cam_cover_25200-63_by_motorcycle_dreams_pic4.jpg?direct&300|}} {{:techtalk:ih:engmech:1963-1966_xlh_1963-1967_xlch_cam_cover_25200-63_by_motorcycle_dreams_pic5.jpg?direct&300|}} {{:techtalk:ih:engmech:1963-1966_xlh_1963-1967_xlch_cam_cover_25200-63_by_motorcycle_dreams_pic6.jpg?direct&300|}} \\ | {{:techtalk:ih:engmech:1963-1966_xlh_1963-1967_xlch_cam_cover_25200-63_by_motorcycle_dreams_pic4.jpg?direct&300|}} {{:techtalk:ih:engmech:1963-1966_xlh_1963-1967_xlch_cam_cover_25200-63_by_motorcycle_dreams_pic5.jpg?direct&300|}} {{:techtalk:ih:engmech:1963-1966_xlh_1963-1967_xlch_cam_cover_25200-63_by_motorcycle_dreams_pic6.jpg?direct&300|}} \\ | ||
+ | |||
+ | ===== 1967 XLH Cover ===== | ||
+ | Part number (25201-67). Casting number (25202-52A). \\ | ||
+ | Same as 1967 XLCH but has the cut-out for electric start. \\ | ||
+ | |||
+ | {{:techtalk:ih:engmech:1967_xlh_cam_cover_pic1_by_market406.jpg?direct&300|}} ((photo courtesy of Ebay seller, market406. [[https://www.ebay.com/sch/market406/m.html?_nkw=&_armrs=1&_ipg=&_from=|Link to Items for Sale page]] )) {{:techtalk:ih:engmech:1967_xlh_cam_cover_pic3_by_market406.jpg?direct&300|}} ((photo courtesy of Ebay seller, market406. [[https://www.ebay.com/sch/market406/m.html?_nkw=&_armrs=1&_ipg=&_from=|Link to Items for Sale page]] )) \\ | ||
+ | |||
===== 1968-1969 XLCH Cover ===== | ===== 1968-1969 XLCH Cover ===== | ||
- | Cover part number (25200-63A). Casting number is (02-86). \\ | + | Cover part number (25200-63A). Casting number is (02-68). \\ |
The oil tank is still vented to the fitting at the top of the right case behind the rear cylinder. \\ | The oil tank is still vented to the fitting at the top of the right case behind the rear cylinder. \\ | ||
Looks similar to the 68 H cover with exceptions. \\ | Looks similar to the 68 H cover with exceptions. \\ | ||
The XLCH cover has a squared (uncut) rear corner, no 90° fitting on back and the ignition boss on top is set up to accept a magneto. \\ | The XLCH cover has a squared (uncut) rear corner, no 90° fitting on back and the ignition boss on top is set up to accept a magneto. \\ | ||
+ | |||
+ | Click on any pic to enlarge: ((photos courtesy of Brewer's Performance Inc. in Laura, Ohio [[http://www.brewersperformance.com/|Link to website]] )) \\ | ||
+ | {{:techtalk:ih:engmech:1968-1969_xlch_cam_cover_25200-63_pic1_by_shopanuck.jpg?direct&300|}} {{:techtalk:ih:engmech:1968-1969_xlch_cam_cover_25200-63_pic2_by_shopanuck.jpg?direct&300|}} \\ | ||
+ | |||
+ | {{:techtalk:ih:engmech:1968-1969_xlch_cam_cover_25200-63_pic3_by_shopanuck.jpg?direct&300|}} {{:techtalk:ih:engmech:1968-1969_xlch_cam_cover_25200-63_pic4_by_shopanuck.jpg?direct&300|}} \\ | ||
===== 1968-1970 XLH Cover ===== | ===== 1968-1970 XLH Cover ===== | ||
Line 62: | Line 138: | ||
Both fittings are 1/8"-27 NPT to 1/4" hose barb 90° elbows. \\ | Both fittings are 1/8"-27 NPT to 1/4" hose barb 90° elbows. \\ | ||
- | Click on a pic to enlarge: ((photos courtesy of Ebay seller, animalhouse2010, [[https://www.ebay.com/str/animalhouse2010?_trksid=p2047675.l2563|Link to Ebay store:]] )) \\ | + | {{:techtalk:ih:engmech:1968-1970_xlh_cam_cover_25201-67a_pic1_by_flashback_inc.jpg?direct&300|}} ((photo courtesy of Flashback Enterprises in Imlay City, MI, [[https://www.ebay.com/str/flashbackenterprisesinc?_trksid=p2047675.m3561.l2563|Link to Ebay Store]] )) |
- | {{:techtalk:ih:engmech:1968-1970_xlh_cam_cover_25201-67a_by_animalhouse2010_pic1.jpg?direct&300|}} {{:techtalk:ih:engmech:1968-1970_xlh_cam_cover_25201-67a_by_animalhouse2010_pic2.jpg?direct&300|}} {{:techtalk:ih:engmech:1968-1970_xlh_cam_cover_25201-67a_by_animalhouse2010_pic3.jpg?direct&300|}} \\ | + | {{:techtalk:ih:engmech:1968-1970_xlh_cam_cover_25201-67a_pic2_by_flashback_inc.jpg?direct&300|}} ((photo courtesy of Flashback Enterprises in Imlay City, MI, [[https://www.ebay.com/str/flashbackenterprisesinc?_trksid=p2047675.m3561.l2563|Link to Ebay Store]] )) \\ |
- | {{:techtalk:ih:engmech:1968-1970_xlh_cam_cover_25201-67a_by_animalhouse2010_pic4.jpg?direct&300|}} {{:techtalk:ih:engmech:1968-1970_xlh_cam_cover_25201-67a_by_animalhouse2010_pic5.jpg?direct&300|}} {{:techtalk:ih:engmech:1968-1970_xlh_cam_cover_25201-67a_by_animalhouse2010_pic6.jpg?direct&300|}} \\ | + | {{:techtalk:ih:engmech:1968-1970_xlh_cam_cover_25201-67a_pic1_by_cyclewarehouse.jpg?direct&300|}} ((photo courtesy of Ebay seller, cyclewarehouse. [[https://www.ebay.com/sch/cyclewarehouse/m.html?_nkw=&_armrs=1&_ipg=&_from=|Link to Items for Sale]] )) {{:techtalk:ih:engmech:1968-1970_xlh_cam_cover_25201-67a_pic3_by_flashback_inc.jpg?direct&300|}} ((photo courtesy of Flashback Enterprises in Imlay City, MI, [[https://www.ebay.com/str/flashbackenterprisesinc?_trksid=p2047675.m3561.l2563|Link to Ebay Store]] )) \\ |
===== 1970 XLCH Cover ===== | ===== 1970 XLCH Cover ===== | ||
Line 73: | Line 149: | ||
The fitting (62375-57) is a 1/8"-27 NPT to 1/4" hose barb 90° elbow. \\ | The fitting (62375-57) is a 1/8"-27 NPT to 1/4" hose barb 90° elbow. \\ | ||
- | Click on a pic to enlarge: ((pics by Scott of the XLFORUM http://xlforum.net/forums/showthread.php?t=2073823)) \\ | + | Click on a pic to enlarge: ((pics by Scott of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/197215-cam-cover-id-help-please-warning-huge-pics?t=2073823)) \\ |
{{:techtalk:ih:engmech:1970_xlch_cam_cover_25200-70_pic1_by_scott.jpg?direct&300|}} {{:techtalk:ih:engmech:1970_xlch_cam_cover_25200-70_pic2_by_scott.jpg?direct&300|}} {{:techtalk:ih:engmech:1970_xlch_cam_cover_25200-70_pic3_by_scott.jpg?direct&300|}} \\ | {{:techtalk:ih:engmech:1970_xlch_cam_cover_25200-70_pic1_by_scott.jpg?direct&300|}} {{:techtalk:ih:engmech:1970_xlch_cam_cover_25200-70_pic2_by_scott.jpg?direct&300|}} {{:techtalk:ih:engmech:1970_xlch_cam_cover_25200-70_pic3_by_scott.jpg?direct&300|}} \\ | ||
Line 96: | Line 172: | ||
Fasteners: (8) cover screws, (2) generator mounting bolts and (2) solid dowel pins (used at front and rear of cover). \\ | Fasteners: (8) cover screws, (2) generator mounting bolts and (2) solid dowel pins (used at front and rear of cover). \\ | ||
[[techtalk:ih:engmech01g#cam_cover_fastener_list|Click Here]] to see full fastener list. \\ | [[techtalk:ih:engmech01g#cam_cover_fastener_list|Click Here]] to see full fastener list. \\ | ||
- | |||
===== 1975-1976 XLCH Cover ===== | ===== 1975-1976 XLCH Cover ===== | ||
Line 201: | Line 276: | ||
{{:techtalk:ih:engmech:1979_xls_cam_cover_25205-79_by_harley-davidson_parts_accessories_pic4.jpg?direct&300|}} {{:techtalk:ih:engmech:1979_xls_cam_cover_25205-79_by_harley-davidson_parts_accessories_pic5.jpg?direct&300|}} {{:techtalk:ih:engmech:1979_xls_cam_cover_25205-79_by_harley-davidson_parts_accessories_pic6.jpg?direct&300|}} \\ | {{:techtalk:ih:engmech:1979_xls_cam_cover_25205-79_by_harley-davidson_parts_accessories_pic4.jpg?direct&300|}} {{:techtalk:ih:engmech:1979_xls_cam_cover_25205-79_by_harley-davidson_parts_accessories_pic5.jpg?direct&300|}} {{:techtalk:ih:engmech:1979_xls_cam_cover_25205-79_by_harley-davidson_parts_accessories_pic6.jpg?direct&300|}} \\ | ||
+ | |||
===== 1980 XLH Cover ===== | ===== 1980 XLH Cover ===== | ||
Part number for cover (25208-80). Casting number (80-25222). \\ | Part number for cover (25208-80). Casting number (80-25222). \\ |