IH: Engine Mechanicals - Sub-01T

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

[[:techtalk:menu|{{  :techtalk:gototechnicalmenu.jpg|}}]]
====== IH: Engine Mechanicals - Sub-01T ======


\\

[[:techtalk:menu|{{:techtalk:gototechnicalmenu.jpg|}}]]






====== Catalog of OEM Ironhead Flywheels ======
See also, [[techtalk:ref:engmech01k|Catalog of Aftermarket Flywheels]] in the REF section of the Sportsterpedia. \\
Click on a pic to enlarge:

  * **Pre AMF 900 flywheel marks**: ((Dr Dick of the XLFORUM http://xlforum.net/forums/showthread.php?t=1427992))
    * The single vertical line is the 45° advanced timing mark for the front cylinder.
    * The double vertical lines are the 15° advanced timing mark for the front cylinder that's used to set retarded kick start timing.
    * The dot is TDC front cylinder.
    * The AMF Sportsters used double dots for rear advanced timing.

|{{:techtalk:ih:engmech:65_flywheels_by_jackprice53.jpg?direct&300|}}|
|  65 OEM Flywheel ((photo by JackPrice53 of the XLFORUM http://xlforum.net/forums/showthread.php?postid=5353281))  |

  * **1973 1000 flywheel marks**: ((DirtyCory of the XLFORUM http://xlforum.net/forums/showthread.php?t=1558035))
    * The vertical line is advance mark for the front cylinder.
    * The single dot is TDC for the front cylinder.
    * The double dot is advanced timing for the rear cylinder.

Trace: • REF: Engine Mechanicals - Sub-01M • IH: Engine Mechanicals - Sub-01T • EVO: Engine Control - Sub-01a • REF: Engine Mechanicals - Sub-04P • REF: Extra Models • REF: Tools - 145 • IH: Transmission & Final Drive • EVO: Engine Mechanicals - Sub-01G • EVO: Transmission & Final Drive • IH: Engine Mechanicals - Sub-03A