Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision Next revision Both sides next revision | ||
|
techtalk:ih:oil03 [2019/12/19 06:40] hippysmack |
techtalk:ih:oil03 [2019/12/21 01:52] hippysmack [Priming the Oil Pump] |
||
|---|---|---|---|
| Line 220: | Line 220: | ||
| * Another way to prime the pump is to use assembly lube on the gerotors and inside of the pump before installing it. ((aswracing of the XLFORUM http://xlforum.net/forums/showthread.php?p=4805186#post4805186)) \\ Then you have an instant hydraulic seal to help the oil pump suck oil from the hose. | * Another way to prime the pump is to use assembly lube on the gerotors and inside of the pump before installing it. ((aswracing of the XLFORUM http://xlforum.net/forums/showthread.php?p=4805186#post4805186)) \\ Then you have an instant hydraulic seal to help the oil pump suck oil from the hose. | ||
| * You can also using a large syringe with a tapered tip inserted into the oil supply hose on the bottom of the oil tank. ((ericfreeman of the XLFORUM http://xlforum.net/forums/showthread.php?p=5751479#post5751479)) \\ Then you can force feed oil the pump and on to the engine using this technique and it avoids having to mess with the sending unit. | * You can also using a large syringe with a tapered tip inserted into the oil supply hose on the bottom of the oil tank. ((ericfreeman of the XLFORUM http://xlforum.net/forums/showthread.php?p=5751479#post5751479)) \\ Then you can force feed oil the pump and on to the engine using this technique and it avoids having to mess with the sending unit. | ||
| + | * With this homemade tool, all you have to do is use a grease gun (without grease) filled with oil and pump it into the system so a dry start can be avoided. {{:techtalk:ref:tools:check_ball_tester_and_prelube_fitting_by_bustert.jpg?direct&300|}} ((photo by bustert of the XLFORUM http://xlforum.net/forums/showthread.php?t=1813185&page=2)) | ||
