This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
techtalk:ih:oil04a [2019/06/27 17:35]
— (current)
Line 1: Line 1:
-[[:​techtalk:​menu|{{ ​ :​techtalk:​gototechnicalmenu.jpg|}}]] 
-====== IH: Oiling & Lubrication - Sub-04A ====== 
-====== Rebuilding the Kidney Tank Oil Cap ====== 
-These pics show how the oil cap comes apart. \\ 
-Here is what you have when you flip it over and clean it up. \\ 
-With the C-clip removed, hold the round end that the dipstick comes out of. \\ 
-Turn the wing nut counter clockwise to unscrew it from the rest of the assembly. \\ 
-The lower section will slide to the side and then lift out one side at a time. \\  
-This is not necessary to replace the gasket or the O-ring but it may be for something more in depth. \\ 
-|Right against the cap you have a C-clip. Pull it out.|  Unscrew the dipstick from the cap.  || 
-There is an O-ring at the top of the shaft between the cap and the wing nut. \\ 
-If it's flattened, it may cause an oil leak on the top of my tank. \\ 
-|Check the O-ring.|This one was replaced with one from an Evo head rebuild (bigger O-ring). \\ The inside diameter was a little big but it fit inside the groove and was thick enough to seat against the cap.||