Differences

This shows you the differences between two versions of the page.


Previous revision
techtalk:ih:oil04h [2024/01/01 21:03] (current) hippysmack
Line 1: Line 1:
 +[[:techtalk:menu|{{  :techtalk:gototechnicalmenu.jpg|}}]]
 +====== IH: Oiling & Lubrication - Sub-04H ======
 +====== Pics and Information on L1973-1978 XLCH "Lunchbox" Oil Tanks ======
 +See also in the Sportsterpedia; \\
 +….. *[[techtalk:ih:oil04#oil_line_routing|57-85 Oil Line Routing]] \\
 +….. *[[techtalk:ih:elec02m#pics_and_information_on_stock_ih_battery_trays_and_parts|Pics and Information on stock IH Battery Trays and Parts]] \\
  
 +Click on any pic below to enlarge: \\
 +====== L1973-1978 Offset Mount Tank ======
 +The design of the frame changed in 1973. 1972-earlier used a heavy rough casting where the top tube and the vertical rear tubes meet. \\
 +The 1972 and earlier frame tubes are canted at an angle of 10° where the 1973 frame tubes are at an angle of 9°45'. Not a great difference but still different. \\
 +1973 did away with the casting. \\
 +And used what looks like lightweight welded strap metal with an angular bracing running from the rear engine mount up to the end of the fender supports. \\
 +But a greater change (apart from the casting elimination) is the distance between the head tube and the rear vertical tubes. 1972 = 28.42", 1973 = 29.04". \\
 +Even though the 1972 frame head had a greater rake angle (30°) the 1973 rake angle was less (29°35') the distance to the rear tubes is greater. ((piniongear of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/96210-xlch-lunchbox-oil-tank-question?t=806891)) \\
 +L73-78 tanks are notched on the flange between the top bolt holes. This notch allowed HD to raise the tank position. \\
 +Raising the tank meant that both the upper and lower mounts were changed (new upper mount - 62554-73 and new lower mount - 62555-73). \\
 +In 1975, a ridge was added to the inside of the filler neck to retain the filler cap better. The L73-78 bottom mount is taller for the raised tank. ((Dr Dick of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/126499-xlch-oil-tank-differences?t=1284627)) 
 +
 +Below is an after market version upper oil tank mount from Legends Motorcycles showing how the upper mount changed. \\ 
 +There are two mounting holes running front to rear to attach it to the frame. \\
 +{{:techtalk:ih:oil:oil_tank_bracket_-_upper-_for_l1973-1978_xlch_by_legendsmc.jpg?direct&300|}} ((photo courtesy of Legends Motorcycles, [[https://www.ebay.com/str/legendsmotorcycles?_trksid=p2047675.l2563|Link to Ebay store]] )) \\
 +
 +====== Pics ======
 +Click on any pic to enlarge: \\
 +
 +|  L1973-1978 XLCH Oil Tank Pics ((photos courtesy of Ebay seller, animalhouse2010, [[https://www.ebay.com/str/animalhouse2010?_trksid=p2047675.l2563|Link to Ebay store:]] ))  |||
 +|{{:techtalk:ih:oil:1973l-1978_xlch_oil_tank_62508-73_pic1_by_animalhouse2010.jpg?direct&300|}}|{{:techtalk:ih:oil:1973l-1978_xlch_oil_tank_62508-73_pic2_by_animalhouse2010.jpg?direct&300|}}|{{:techtalk:ih:oil:1973l-1978_xlch_oil_tank_62508-73_pic3_by_animalhouse2010.jpg?direct&300|}}|
 +
 +|  L1973-1978 XLCH Oil Tank Pics ((photos courtesy of Ebay seller, animalhouse2010, [[https://www.ebay.com/str/animalhouse2010?_trksid=p2047675.l2563|Link to Ebay store:]] ))  |||
 +|{{:techtalk:ih:oil:1973l-1978_xlch_oil_tank_62508-73_pic4_by_animalhouse2010.jpg?direct&300|}}|{{:techtalk:ih:oil:1973l-1978_xlch_oil_tank_62508-73_pic5_by_animalhouse2010.jpg?direct&300|}}|{{:techtalk:ih:oil:1973l-1978_xlch_oil_tank_62508-73_pic6_by_animalhouse2010.jpg?direct&300|}}|
 +
 +\\
 +
 +
 +[[:techtalk:menu|{{:techtalk:gototechnicalmenu.jpg|}}]]