Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision Next revision Both sides next revision | ||
|
techtalk:ih:susp03 [2022/02/12 05:08] hippysmack |
techtalk:ih:susp03 [2022/02/12 20:41] hippysmack [Swingarm Parts List] |
||
|---|---|---|---|
| Line 8: | Line 8: | ||
| A number of 1972 Sportsters were produced from November 1, 1971 to March 29, 1972 without the (3 position) stake operation performed on the rear left side fork bearing lock nut (47514-52). Bearing pre-load (which should be kept at 1-2 pounds) is controlled by the left and right (47515-52) bearing lock nuts. The affected VINs were (3A or 4A) 18748H2 to 33040H2. This safety defect prompted a recall of the affected bikes with the dealer being required to remove the rear fork for inspection and stake any of them that were done previously at a rate of $7 reimbursed labor and handling. ((HD Service Bulletin #636 dated April 27, 1972 pg OC-403)) | A number of 1972 Sportsters were produced from November 1, 1971 to March 29, 1972 without the (3 position) stake operation performed on the rear left side fork bearing lock nut (47514-52). Bearing pre-load (which should be kept at 1-2 pounds) is controlled by the left and right (47515-52) bearing lock nuts. The affected VINs were (3A or 4A) 18748H2 to 33040H2. This safety defect prompted a recall of the affected bikes with the dealer being required to remove the rear fork for inspection and stake any of them that were done previously at a rate of $7 reimbursed labor and handling. ((HD Service Bulletin #636 dated April 27, 1972 pg OC-403)) | ||
| - | |||
| - | * There are 4 variants of the long swingarm | ||
| - | - 67-72 xlh 70-72 xlch | ||
| - | - 73 & 74 all- starting in 73 the 'new' brake anchor came out. the one that needs to be loosened to adj chain. this arm got addl machine work at anchor 'top hat' seat | ||
| - | - 75 & 76 all | ||
| - | - 77 & 78 all but xlcr | ||
| - | |||
| - | |||
| - | |Short and Long Swingarm ((photo by Dr Dick of the XLFORUM® http://xlforum.net/forums/showthread.php?t=1062720&page=23))| | ||
| - | |{{:techtalk:ih:susp:ih_swingarm_pic_by_dr_dick.jpg?direct&600|}}| | ||
| ===== Swingarm Swaps ===== | ===== Swingarm Swaps ===== | ||
| Line 74: | Line 64: | ||
| |**1979 XL/XLCH/XLS**|47549-79 (**without bearings**) ((1979 HD Sportster Parts Catalog pg 53))||| | |**1979 XL/XLCH/XLS**|47549-79 (**without bearings**) ((1979 HD Sportster Parts Catalog pg 53))||| | ||
| |**1979-1981 XL/XLCH/XLS**|47532-79A (**with bearings**) ((1979-1985 HD Sportster Parts Catalog pg 87))||| | |**1979-1981 XL/XLCH/XLS**|47532-79A (**with bearings**) ((1979-1985 HD Sportster Parts Catalog pg 87))||| | ||
| - | |**1979-1981 XLCH** \\ **1979-1981 XL/XLS**|47473-80 (**without bearings**) ((1979-1985 HD Sportster Parts Catalog pg 87))||| | + | |**1979-1981 XL/XLCH/XLS**|47473-80 (**without bearings**) ((1979-1985 HD Sportster Parts Catalog pg 87))||| |
| |**1982 XL/XLS**|47532-81 (**with bearings**) ((1979-1985 HD Sportster Parts Catalog pg 89)) Square Tube ((cdn_edge http://xlforum.net/forums/showthread.php?t=709634&page=5))||| | |**1982 XL/XLS**|47532-81 (**with bearings**) ((1979-1985 HD Sportster Parts Catalog pg 89)) Square Tube ((cdn_edge http://xlforum.net/forums/showthread.php?t=709634&page=5))||| | ||
| |**1983-1985 XL/XLS/XLX**|47532-83 (**with bearings**) ((1979-1985 HD Sportster Parts Catalog pg 89)) Square Tube ((cdn_edge http://xlforum.net/forums/showthread.php?t=709634&page=5)) ||| | |**1983-1985 XL/XLS/XLX**|47532-83 (**with bearings**) ((1979-1985 HD Sportster Parts Catalog pg 89)) Square Tube ((cdn_edge http://xlforum.net/forums/showthread.php?t=709634&page=5)) ||| | ||
