Differences

This shows you the differences between two versions of the page.

--- techtalk:ih:susp03 [2022/03/13 08:39]
hippysmack [Pivot Bolt / Nut (1952-1981)]
+++ techtalk:ih:susp03 [2024/01/02 03:26] (current)
hippysmack
@@ Line 10: / Line 10: @@
 ==== Removing the Swingarm ====
-  * Follow the procedure in your FSM to remove the swingarm. However, if you can do it without removing the staked nut on the left side is best. It serves to center the swingarm in the frame and you can bung up the threads  on that nut really easily. ((GA_Ironhead http://xlforum.net/forums/showthread.php?t=185355))
+  * Follow the procedure in your FSM to remove the swingarm. However, if you can do it without removing the staked nut on the left side is best. It serves to center the swingarm in the frame and you can bung up the threads  on that nut really easily. ((GA_Ironhead https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/47932-steering-head-swingarm-bearings-and-races?t=185355))
 ====== Swingarm Swaps ======
-  * Pre-1979, only the 1977 XLCR had the box arm with Disc. ((Monte03 http://xlforum.net/forums/showthread.php?t=1985335&highlight=swingarm))
+  * Pre-1979, only the 1977 XLCR had the box arm with Disc. ((Monte03 https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/185403-77-swingarm?t=1985335&highlight=swingarm))
-  * 1979 - 1981 had the box arm with disc and it will fit pre-79 frames. ((russzx6 http://xlforum.net/forums/showthread.php?t=1985335&highlight=swingarm))
+  * 1979 - 1981 had the box arm with disc and it will fit pre-79 frames. ((russzx6 https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/185403-77-swingarm?t=1985335&highlight=swingarm))
-  * A 79-81 swing arm will bolt on a 72 frame. Things to consider when changing swingarms are master cylinder placement, operation and the fact that the 79-81 swing arm shock mounting will change the angle of your shocks. ((MXHD55U http://xlforum.net/forums/showthread.php?t=1985335&highlight=swingarm))
+  * A 79-81 swing arm will bolt on a 72 frame. Things to consider when changing swingarms are master cylinder placement, operation and the fact that the 79-81 swing arm shock mounting will change the angle of your shocks. ((MXHD55U https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/185403-77-swingarm?t=1985335&highlight=swingarm))
-  * Consider if you even want a disc on the rear. It won't work any better than the drum, which is already powerful enough to lock up the wheel. Put your effort into improving the front brake if you want to stop better. ((Hopper http://xlforum.net/forums/showthread.php?t=1985335&highlight=swingarm)) You would do better by adapting a later 39 MM Evo fork for brakes and handling. ((Monte03 http://xlforum.net/forums/showthread.php?t=1985335&highlight=swingarm))
+  * Consider if you even want a disc on the rear. It won't work any better than the drum, which is already powerful enough to lock up the wheel. Put your effort into improving the front brake if you want to stop better. ((Hopper https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/185403-77-swingarm?t=1985335&highlight=swingarm)) You would do better by adapting a later 39 MM Evo fork for brakes and handling. ((Monte03 https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/185403-77-swingarm?t=1985335&highlight=swingarm))
 ====== Bearing Change, 1952-1956 K Models / 1957-E1974 XL/XLH/XLCH ======
@@ Line 34: / Line 34: @@
 === 1952-1956 K Models & 1957-E1974 XL/XLH/XLCH ===
+|  Left Bearing Lock Nut (47514-52) ((photos courtesy of Deep South Cycles, [[https://www.ebay.com/str/deepsouthcycles?_trksid=p2047675.m3561.l2563|Link to Ebay Store]] ))  ||
+|{{:techtalk:ih:susp:1952-1974e_rear_fork_left_bearing_lock_nut_47514-52_by_deep_south_cycles_pic1.jpg?direct&300|}}|{{:techtalk:ih:susp:1952-1974e_rear_fork_left_bearing_lock_nut_47514-52_by_deep_south_cycles_pic2.jpg?direct&300|}}|
 |  Right Bearing Locknut (47515-52) ((photos courtesy of Ebay seller, Robison Motorcycles [[https://www.ebay.com/str/robisonmotorcycles?_trksid=p2047675.l2563|Link to Ebay Store]] ))  ||
 |{{:techtalk:ih:susp:1952-1974e_rear_fork_right_bearing_lock_nut_47515-52_pic1_by_robisonmotorcycles.jpg?direct&300|}}|{{:techtalk:ih:susp:1952-1974e_rear_fork_right_bearing_lock_nut_47515-52_pic2_by_robisonmotorcycles.jpg?direct&300|}}|
@@ Line 45: / Line 48: @@
 ====== Parts Lists ======
+\\
 ===== Swingarms ======
@@ Line 68: / Line 71: @@
 ===== Swingarm Related Parts Lists =====
+\\
 ==== Swingarm Bearings / Bushings ====
 ^{{techtalk:miscres:instruction_sheet_header_4.png?nolink&790|}}|||
 |**Year Model**|**Bearing(s)**|**Notes**|
-|1952-1956 K Models \\ 1957-E1974 XL/XLH/XLCH|47521-52 (original)|2 required. Timken: Race 17520, Bearing 17580 ((GA_Ironhead http://xlforum.net/forums/showthread.php?t=709634&page=5))|
+|1952-1956 K Models \\ 1957-E1974 XL/XLH/XLCH|47521-52 (original)|2 required. Timken: Race 17520, Bearing 17580 ((GA_Ironhead https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/88845-guide-to-swingarm-bearing-replacement/page5?t=709634&page=5))|
-|:::|Bearing Kit 47550-74 (updated)|Bearings are shorter than original. \\ Can't mix new parts with original parts \\ [[techtalk:ih:susp03#bearing_change_1952-1956_k_models_1957-e1974_xl_xlh_xlch|Click Here]] for more information  |
+|:::|Bearing Kit 47550-74 \\ (uses L1974 bearings)|Bearings are shorter than original. \\ Can't mix new parts with original parts \\ [[techtalk:ih:susp03#bearing_change_1952-1956_k_models_1957-e1974_xl_xlh_xlch|Click Here]] for more information  |
-|L1974-1981 XLH/XLCH/XLS|47521-74|2 required. Timken: Race 11520, Bearing 11590 ((GA_Ironhead http://xlforum.net/forums/showthread.php?t=709634&page=5))|
+|L1974-1981 XLH/XLCH/XLS|47521-74|2 required. Timken: Race 11520, Bearing 11590 ((GA_Ironhead https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/88845-guide-to-swingarm-bearing-replacement/page5?t=709634&page=5))|
 |1982-1985 XL/XLS/XLX|47083-81|Left side bushing|
-|:::|47082-81|Right side bearing, 2 required. \\ Timken: Race LM11710, Bearing LM11749 ((GA_Ironhead http://xlforum.net/forums/showthread.php?t=709634&page=5))|
+|:::|47082-81|Right side bearing, 2 required. \\ Timken: Race LM11710, Bearing LM11749 ((GA_Ironhead https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/88845-guide-to-swingarm-bearing-replacement/page5?t=709634&page=5))|
 ==== Bearing Spacers / Shields ====
@@ Line 142: / Line 145: @@
 |79 XL/XLCH/XLS|(2) 47554-78|
 |79-85 XL/XLCH/XLS/XLX|(2) 47554-73|
 ==== Plastic Bearing Plug ====

Trace:

Differences

Navigation

Search

Toolbox