Table of Contents
This is an old revision of the document!
IH: Wheels, Brakes & Tires - Sub-02H
Front Master Cylinder Identification
1982-1983 Front Master Cylinder
3/4“ bore:
No bore markings on the outside. The only stampings on it are “82” and “A5”.
The inside of the “cup” that goes on the spring is stamped 3/4”.
1)
, 2)
, 3)
, 4)
photo by Static of the XLFORUM http://xlforum.net/forums/showthread.php?t=1926316&highlight=master+cylinder