Differences

This shows you the differences between two versions of the page.

--- techtalk:ref:body01 [2019/06/30 16:36]
+++ techtalk:ref:body01 [2022/03/09 05:15]
ixl2relax ↷ Page name changed from techtalk:ref:body05 to techtalk:ref:body01
@@ Line 1: / Line 1: @@
+[[:techtalk:menu|{{  :techtalk:gototechnicalmenu.jpg|}}]]
+====== REF: Body Parts ======
+====== Aftermarket Fuel Tanks ======
+\\
+====== Spare Fuel Tanks / Containers ======
+You can buy a pair of 1.5 liter camping gas bottles that you can fit in the saddlebags when on a road trip to give a little insurance against running dry. ((ericfreeman of the XLFORUM http://xlforum.net/forums/showthread.php?t=527546)) \\
+Only problem with the bottles is the small neck size that makes filling from a gas pump difficult and messy. \\
+Below is a 1975 Honda CT90 auxiliary gas tank. ((ericfreeman of the XLFORUM http://xlforum.net/forums/showthread.php?t=527546)) \\\\
+It holds 2.3 liters (.6 gallons), has a nice large opening for filling from a pump. \\
+It also has a flexible hose and cap for emptying the gas into the bike's tank. \\
+It's About the size of a canteen and fully designed for gas storage. \\
+These tanks can command a hefty price on Ebay due to their rarity in good condition. \\
+However, if you know someone who has an old CT90 in their shed, maybe you could borrow/buy the little gas tanks. \\
+|  1975 Honda CT-90 auxillary gas tank. ((photos by ericfreeman of the XLFORUM http://xlforum.net/forums/showthread.php?t=527546))  |||
+|{{:techtalk:ref:body:1975_honda_ct-90_aux_gas_tank_1_by_ericfreeman.png?direct&300|}}|{{:techtalk:ref:body:1975_honda_ct-90_aux_gas_tank_2_by_ericfreeman.png?direct&300|}}|{{:techtalk:ref:body:1975_honda_ct-90_aux_gas_tank_3_by_ericfreeman.png?direct&300|}}|
+====== Fuel Tank Parts and Mods ======
+====== Petcock (Fuel Outlet) ======
+When removing a factory vacuum operated petcock and swapping to a non-vacuum one, run a new (fresh) vacuum line from the carburetor to the Voes or Map Sensor (respective to year model) and discard the "tee" fitting. It will be cleaner to not use the "T". ((V of the XLFORUM http://xlforum.net/forums/showthread.php?t=1757206))
+Here's an XLForum thread showing several aftermarket petcocks:
+http://xlforum.net/forums/showthread.php?t=1378389
+===== Golan Petcock =====
+|{{:techtalk:ref:body:golan_brass_petcock_by_folkie.jpg?direct&300|}}|{{:techtalk:ref:body:golan_petcock_by_fourcams.jpg?direct&200|}}|
+|Golan brass petcock. With the nut screwed all the way down, it's \\ 1-5/16" from the top of the nut to the \\ bottom of the petcock. From the bottom of the nut it's 7/8".((photo by Folkie of the XLFORUM http://xlforum.net/forums/showthread.php?t=475189))|  Golan petcock installed ((photo by FourCams of the XLFORUM http://xlforum.net/forums/showthread.php?t=475189&page=2))  |
+===== Pingel Petcock =====
+The EFI petcock has both an inlet for the fuel pressure regulator return line and a 5/16" outlet. \\
+(but no strainer or reserve/shutoff valve for the EFI system) \\
+|{{:techtalk:ref:body:pingel_petcocks_by_donchicago48.jpg?direct&300|}}|
+|5/16" with vacuum shutoff (Left), 5/16" EFI (Right) ((photo by DonChicago48 of the XLFORUM http://xlforum.net/forums/showthread.php?t=1610587&page=4))|
+===== 86-03 Tank Mount Mod =====
+You can use slices of 5/16" or 3/8" ID rubber oil or fuel line to create to insulate the fuel tank from the frame in absence of the stock rubber grommets.
+{{:techtalk:ref:body:home_made_rubber_bushings_for_gas_tank_mounts_by_ironmick.jpg?direct&300|}} ((photo by Ironmick of the XLFORUM http://xlforum.net/forums/showthread.php?t=2004980&highlight=gas+tank))
+\\
+[[:techtalk:menu|{{:techtalk:gototechnicalmenu.jpg|}}]]

Trace:

Differences

Navigation

Search

Toolbox