Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
techtalk:ref:body01 [2019/07/11 22:20]
hippysmack [Foot Controls]
techtalk:ref:body01 [2019/09/17 14:40] (current)
hippysmack [Kickstand]
Line 18: Line 18:
 * . . . [[techtalk:​ref:​body01j|Brake Pedal Mods]] \\ * . . . [[techtalk:​ref:​body01j|Brake Pedal Mods]] \\
 * . . . [[techtalk:​ref:​body01k|Shifter Mods]] \\ * . . . [[techtalk:​ref:​body01k|Shifter Mods]] \\
-* . . . [[techtalk:​ref:​body01l|Higwway Bars, Engine Guards]] \\ +* . . . [[techtalk:​ref:​body01l|Highway Pegs and Multiple Foot Positioning]] \\ 
-* . . . [[techtalk:​ref:​body01m|Gallery of Foot Pegs / Shifters]] \\+* . . . [[techtalk:​ref:​body01m|Gallery of Foot Pegs / Shifters ​/ Heel-Toe]] \\
  
 \\ \\
Line 34: Line 34:
 ====== Kickstand ===== ====== Kickstand =====
 * . . . [[techtalk:​ref:​body01t|Kickstand Mods]] \\ * . . . [[techtalk:​ref:​body01t|Kickstand Mods]] \\
 +
 +
 +===== Kickstand replaced on a 2003 1200C =====
 +
 +(See the [[techtalk:​ref:​body01#​kickstand_spring_alternative|alternative spring choice]] in the REF Section)\\
 +(See the [[techtalk:​ref:​body01#​kickstand_bushings_alternative|alternative kickstand bushings]] in the REF Section)\\
 +Using an aftermarket jiffy stand and spring with the hinge pin, brass bushings and cotter pin from HD, total cost (over $90). ((BlackBikeDave of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​t=1643796)) \\
 +You can see the top bushing and the cotter pin. Notice how the bushing has a small bit of room to rock back and forth. \\
 +As per the manual you will have to make sure that is greased well and inspect every servicing. \\
 +{{:​techtalk:​ref:​body:​jiffy_stand_1_by_blackbikedave.jpg?​direct&​300|}} ((photo by BlackBikeDave of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​t=1643796)) {{:​techtalk:​ref:​body:​jiffy_stand_2_by_blackbikedave.jpg?​direct&​300|}} ((photo by BlackBikeDave of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​t=1643796)) {{:​techtalk:​ref:​body:​jiffy_stand_3_by_blackbikedave.jpg?​direct&​300|}} ((photo by BlackBikeDave of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​t=1643796)) \\
 +
 +There is a perfect hole in the bracket on the frame to hold the bottom bushing in place (meaning it can't move like the top one can. \\
 +Also you can see where the spring attaches. Also check this for problems at every servicing. \\
 +{{:​techtalk:​ref:​body:​jiffy_stand_4_by_blackbikedave.jpg?​direct&​300|}} ((photo by BlackBikeDave of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​t=1643796)) {{:​techtalk:​ref:​body:​jiffy_stand_5_by_blackbikedave.jpg?​direct&​300|}} ((photo by BlackBikeDave of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​t=1643796)) {{:​techtalk:​ref:​body:​jiffy_stand_6_by_blackbikedave.jpg?​direct&​150|}} ((photo by BlackBikeDave of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​t=1643796)) \\
 ===== Kickstand Spring Alternative ===== ===== Kickstand Spring Alternative =====