Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
techtalk:ref:body05 [2019/08/17 15:28]
hippysmack [86-03 Tank Mount Mod]
techtalk:ref:body05 [2019/08/17 15:39] (current)
hippysmack [Golan Petcock]
Line 26: Line 26:
 |Golan brass petcock. With the nut screwed all the way down, it's \\ 1-5/​16"​ from the top of the nut to the \\ bottom of the petcock. From the bottom of the nut it's 7/​8"​.((photo by Folkie of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​t=475189))| ​ Golan petcock installed ((photo by FourCams of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​t=475189&​page=2)) ​ | |Golan brass petcock. With the nut screwed all the way down, it's \\ 1-5/​16"​ from the top of the nut to the \\ bottom of the petcock. From the bottom of the nut it's 7/​8"​.((photo by Folkie of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​t=475189))| ​ Golan petcock installed ((photo by FourCams of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​t=475189&​page=2)) ​ |
  
 +===== Pingel Petcock =====
 +The EFI petcock has both an inlet for the fuel pressure regulator return line and a 5/16" outlet. \\
 +(but no strainer or reserve/​shutoff valve for the EFI system) \\
 +
 +|{{:​techtalk:​ref:​body:​pingel_petcocks_by_donchicago48.jpg?​direct&​300|}}|
 +|5/16" with vacuum shutoff (Left), 5/16" EFI (Right) ((photo by DonChicago48 of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​t=1610587&​page=4))|
 ===== 86-03 Tank Mount Mod ===== ===== 86-03 Tank Mount Mod =====
 You can use slices of 5/16" or 3/8" ID rubber oil or fuel line to create to insulate the fuel tank from the frame in absence of the stock rubber grommets. ​ You can use slices of 5/16" or 3/8" ID rubber oil or fuel line to create to insulate the fuel tank from the frame in absence of the stock rubber grommets. ​