Table of Contents
This is an old revision of the document!
REF: Carburetor, Intake Manifold & Exhaust
Aftermarket Air Cleaners and Modifications
Some air cleaners are not set up to allow for the breather bolts into them and are only held on by the three small carb front bolts. 1)
For these breathers you would need to get a head breather kit and carb support bracket.
The breather kit routes the head vents to the ground while the carb support bracket keeps the carb in the intake.
1)
Shu of the XLFORUM http://xlforum.net/forums/showthread.php?t=146084&page=11
