Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
Last revision Both sides next revision
techtalk:ref:elec09 [2017/10/24 17:07]
ixl2relax [Device Connector Pinouts] 		techtalk:ref:elec09 [2021/01/26 18:57]
ixl2relax ↷ Page name changed from techtalk:ref:elec08 to techtalk:ref:elec09
Line 1: Line 1:
 ====== REF: Electrical System ====== ====== REF: Electrical System ======
  
-====== Device Connector Pinouts ======+\\
  
-ECM/ICM, Speedo, ​TSM/TSSM/HFSM, Etc. Connector Pinouts:+====== Device Connector Pinouts (ECM/ICM/TSM/TSSM/SPEEDO/​TACH/​Etc) ======
  
-====== Device Connector Pinouts ======+\\ 
 + 
 +===== 1998-2003 Sport Model - Device Connector Pinouts ​===== 
 + 
 + 
 +===== 2004-2017+ Models - Device Connector Pinouts ===== 
 + 
 +<​code>​ 
 +2004-2006 Sportsters - ECM/TSM/Etc Connections 
 +http://​xlforum.net/​forums/​showthread.php?​t=1869052 
 + 
 +ICM position numbers – purpose – wire color 
 +1 run/stop w/bk 
 +2 battery bn/gy 
 +3 +5 sensor power r/w 
 +4 sensor ground bk/w 
 +5 module ground bk 
 +6 coil, front be/o 
 +7 coil, rear y/be 
 +8 crank position sensor + r 
 +9 crank position sensor - bk 
 +10 vehicle speed sensor w/gn 
 +11 MAP signal v/w 
 +12 Serial Data Link lgn/v 
 + 
 +TSM/TSSM 
 +1 battery bn/gy 
 +2 ignition gy 
 +3 Serial Data Link lgn/v 
 +4 security indicator 
 +5 left turn output v 
 +6 right turn output bn 
 +7 right turn input w/bn 
 +8 left turn input w/v 
 +9 starter relay control tn/gn 
 +10 ignition enable switch 
 +11 alarm signal lgn/bn 
 +12 ground bk 
 + 
 +Speedo (numbers are left-right) 
 +12 blank 
 +11 trip switch bk (to 8) 
 +10 blank 
 +9 blank 
 +8 trip switch (to 11) 
 +7 ground bk 
 +6 accessory o/w 
 +5 battery bn/gy 
 +4 security bn/v 
 +3 blank 
 +2 Serial Data Link lg/v 
 +1 ignition o 
 + 
 +Tach 
 +1 ignition o 
 +2 Serial Data Link lg/v 
 +3 blank 
 +4 blank 
 +5 battery bn/gy 
 +6 accessory o/w 
 +7 ground bk 
 +8 blank 
 +9 blank 
 +10 blank 
 +11 blank 
 +12 blank 
 + 
 + 
 + 
 +2007-2013 Sportsters - ECM/TSM/Etc Connections 
 +http://​xlforum.net/​forums/​showthread.php?​t=1869053 
 + 
 +ECM position numbers – purpose – wire color 
 +1 blank 
 +2 system relay gn/o 
 +3 blank 
 +4 blank 
 +5 Serial Data Link lgn/v 
 +6 engine temperature pk/y 
 +7 intake air temp lgn/y 
 +8 front oxygen sensor (A) pk/o 
 +9 jiffy stand switch (HDI only) gn/bn 
 +10 power ground bk 
 +11 coil, rear y/be 
 +12 crank position sensor (-) bk 
 +13 switched power w/bk 
 +14 5V sensor power r/w 
 +15 blank 
 +16 blank 
 +17 idle air control (A) high bk/o 
 +18 idle air control (B) low bk/pk 
 +19 fuel injector, rear gn/gy 
 +20 blank 
 +21 fuel injector, front w/y 
 +22 blank 
 +23 rear oxygen sensor pk/gn 
 +24 throttle position sensor input gy/v 
 +25 TMAP sensor input v/w (TMAP replaced MAP in 2010) 
 +26 5V sensor ground bk/w 
 +27 blank 
 +28 power ground bk 
 +29 coil, front be/o 
 +30 crank position sensor (+) r 
 +31 battery be/gy 
 +32 blank 
 +33 vehicle speed sensor input bk/be 
 +34 blank 
 +35 idle air control (A) low be/gn 
 +36 idle air control (B) high bn/r 
 + 
 +TSM/TSSM 
 +1 battery bn/gy 
 +2 ignition gy 
 +3 Serial Data Link lgn/v 
 +4 neutral safety switch tn (formerly security indicator on 2004-2006) 
 +5 left turn output v 
 +6 right turn output bn 
 +7 right turn input w/bn 
 +8 left turn input w/v 
 +9 starter relay control tn/gn 
 +10 clutch control bk/r (formerly ignition enable switch on 2004-2006) 
 +11 alarm signal lgn/bn 
 +12 ground bk 
 + 
 +Speedo (numbers are left-right) 
 +12 blank 
 +11 trip switch bk (to 8) 
 +10 blank 
 +9 fuel y/w (formerly blank on 2004-2006) 
 +8 trip switch (to 11) 
 +7 ground bk 
 +6 accessory o/w 
 +5 battery bn/gy 
 +4 blank (formerly security on 2004-2006) 
 +3 blank 
 +2 Serial Data Link lg/v 
 +1 ignition o 
 + 
 +Tach 
 +1 ignition o 
 +2 Serial Data Link lg/v 
 +3 blank 
 +4 blank 
 +5 battery bn/gy 
 +6 accessory o/w 
 +7 ground bk 
 +8 blank 
 +9 blank 
 +10 blank 
 +11 blank 
 +12 blank 
 + 
 + 
 + 
 +2014-later - Utilizing CANbus communications 
 +http://​xlforum.net/​forums/​showthread.php?​t=1995444 
 + 
 +(Thanks to schematics supplied by JauntyBishop,​ Sportsterdoc posted this information.) 
 + 
 +ECM-bank one 
 +1. Rear ignition coil gray/blue 
 +2. Front ignition coil green/​blue 
 +3. Front heated oxygen heater ground black/​orange 
 +4. VSS input light green/​yellow 
 +5. Front fuel injector green/​yellow 
 +6. Rear fuel injector gray/​yellow 
 +7. MAP input gray 
 +8. JSS signal light green/​gray 
 +9. ION sensor light green/​brown 
 +10. Sensor ground black/​gray 
 +11. No position 
 +12. No position 
 +13. CAN lo white/​black 
 +14. CAN hi white/red 
 +15. Rear heated oxygen heater ground black/​pink 
 +16. CKP sensor hi red 
 +17. Front heated oxygen sensor green/​brown 
 +18. CKP sensor lo black 
 + 
 +ECM-bank two 
 +1. IAC A hi green/​orange 
 +2. Blank 
 +3. Blank 
 +4. Blank 
 +5. Blank 
 +6. IAT green/​gray 
 +7. 5v sensor ground black/​white 
 +8. ET sensor green 
 +9. 5v sensor power red/white 
 +10. Sensor ground black/​green 
 +11. IAC A lo gray/​orange 
 +12. IAC B hi green/​white 
 +13. IAC B lo gray/​white 
 +14. Blank 
 +15. TPS green/​violet 
 +16. System power red/green 
 +17. 17. Rear heated oxygen sensor gray/​brown 
 +18. Battery fuse red/​orange 
 + 
 +BCM 
 +1. Battery power red 
 +A2. Security antenna hi red 
 +A3. Start enable white/​brown 
 +A4. Security RF antenna black 
 +B2. Security antenna lo black 
 +C3. Ignition switch input white/​blue 
 +C4. Ignition stop switch input white/​gray 
 +D2. CAN hi white/red 
 +D3. Neutral switch input white 
 +E2. CAN lo white/​black 
 +E3. Oil pressure switch input white/​orange 
 +E4. Horn power red/​violet 
 +F3. Brake switch input blue/​green 
 +F4. Fuel pump power red/brown 
 +G4. Sensor ground black/​green 
 +H2. Security Siren white/​green 
 +J2. Front right turn signal blue/​orange 
 +J3. Running light power blue 
 +J4. Front left turn signal blue/pink 
 +K2. Right rear turn signal blue/​brown 
 +K3. Brake lamp power blue/red 
 +K4. Left rear turn signal blue/​violet 
 +L2. Starter solenoid power red/black 
 +L4. Front running/fog lights power red/green 
 +M2. Accessory power red/​yellow 
 +M3. Hi beam power blue/​white 
 +M4. Low beam power blue/​yellow 
 + 
 + 
 +SPEEDO CONNECTIONS (in order from factory schematics) 
 +8. CAN hi white/black from ECM 13 
 +2. CAN lo white/red from ECM 14 
 +4. Hi beam indicator blue/​white 
 +5. Battery red/​orange 
 +6. Neutral indicator white 
 +7. Sensor ground black/​green 
 +1. Oil pressure white/​orange 
 +9. Fuel level white/​yellow 
 +10. Left turn indicator blue pink 
 +12. Right turn indicator blue/​orange 
 + 
 +IGNITION SWITCH 
 +white/blue from BCM C3 
 +black/green to BCM G4 
 +…involving 800 ohm and 200 ohm resistors 
 + 
 +ANTI-THEFT Connections 
 +D black/green sensor ground 
 +C white/black start enable to BCM A3 
 +B blank 
 +A blank 
 +A red/orange power 
 +B white/green signal to BCM H2 
 +C black ground 
 + 
 +Optional - ABS ECU 
 +18 red battery power 
 +14 orange/​brown rear WSS lo 
 +13 orange/pink rear WSS hi 
 +12 orange/blue front WSS hi 
 +11 white/black CAN lo 
 +10 black sensor ground 
 +9 red battery power 
 +4 blue/black switch auxillary lamp power 
 +3 orange/​black front WSS lo 
 +2 white/red CAN hi 
 +1 black/green sensor ground 
 +</​code>​ 
 + 
 +(This section contributed by Sportsterdoc)
  
  

Trace: