Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
techtalk:ref:elec09 [2017/10/24 17:07]
ixl2relax [Device Connector Pinouts] 		techtalk:ref:elec09 [2024/01/13 21:50] (current)
hippysmack
Line 1: Line 1:
 ====== REF: Electrical System ====== ====== REF: Electrical System ======
  
-====== Device Connector Pinouts ======+\\
  
-ECM/​ICM, ​Speedo, TSM/TSSM/HFSM, Etc. Connector Pinouts:+====== Device Connector Pinouts (ECM/ICM/​TSM/​TSSM/​SPEEDO/​TACH/​Etc) ====== 
 + 
 +\\ 
 + 
 +===== 1998-2003 Sport Model - Device Connector Pinouts ===== 
 + 
 + 
 +===== 2004-2017+ Models - Device Connector Pinouts ===== 
 + 
 +<​code>​ 
 +2004-2006 Sportsters - ECM/TSM/Etc Connections 
 +https://​www.xlforum.net/​forum/​sportster-motorcycle-forum/​sportster-motorcycle-electrical/​sportster-motorcycle-electrical-and-ignition/​174323-2004-2006-wiring-info?​t=1869052 
 + 
 +ICM position numbers – purpose – wire color 
 +1 run/stop w/bk 
 +2 battery bn/gy 
 +3 +5 sensor power r/w 
 +4 sensor ground bk/w 
 +5 module ground bk 
 +6 coil, front be/o 
 +7 coil, rear y/be 
 +8 crank position sensor + r 
 +9 crank position sensor - bk 
 +10 vehicle speed sensor w/gn 
 +11 MAP signal v/w 
 +12 Serial Data Link lgn/v 
 + 
 +TSM/TSSM 
 +1 battery bn/gy 
 +2 ignition gy 
 +3 Serial Data Link lgn/v 
 +4 security indicator 
 +5 left turn output v 
 +6 right turn output bn 
 +7 right turn input w/bn 
 +8 left turn input w/v 
 +9 starter relay control tn/gn 
 +10 ignition enable switch 
 +11 alarm signal lgn/bn 
 +12 ground bk 
 + 
 +Speedo (numbers are left-right) 
 +12 blank 
 +11 trip switch bk (to 8) 
 +10 blank 
 +9 blank 
 +8 trip switch (to 11) 
 +7 ground bk 
 +6 accessory o/w 
 +5 battery bn/gy 
 +4 security bn/v 
 +3 blank 
 +2 Serial Data Link lg/v 
 +1 ignition o 
 + 
 +Tach 
 +1 ignition o 
 +2 Serial Data Link lg/v 
 +3 blank 
 +4 blank 
 +5 battery bn/gy 
 +6 accessory o/w 
 +7 ground bk 
 +8 blank 
 +9 blank 
 +10 blank 
 +11 blank 
 +12 blank 
 + 
 + 
 + 
 +2007-2013 Sportsters - ECM/TSM/Etc Connections 
 +https://www.xlforum.net/​forum/​sportster-motorcycle-forum/​sportster-motorcycle-electrical/​sportster-motorcycle-electrical-and-ignition/​174324-2007-2013-wiring-info?​t=1869053 
 + 
 +ECM position numbers – purpose – wire color 
 +1 blank 
 +2 system relay gn/o 
 +3 blank 
 +4 blank 
 +5 Serial Data Link lgn/v 
 +6 engine temperature pk/y 
 +7 intake air temp lgn/y 
 +8 front oxygen sensor (A) pk/o 
 +9 jiffy stand switch (HDI only) gn/bn 
 +10 power ground bk 
 +11 coil, rear y/be 
 +12 crank position sensor (-) bk 
 +13 switched power w/bk 
 +14 5V sensor power r/w 
 +15 blank 
 +16 blank 
 +17 idle air control (A) high bk/o 
 +18 idle air control (B) low bk/pk 
 +19 fuel injector, rear gn/gy 
 +20 blank 
 +21 fuel injector, front w/y 
 +22 blank 
 +23 rear oxygen sensor pk/gn 
 +24 throttle position sensor input gy/v 
 +25 TMAP sensor input v/w (TMAP replaced MAP in 2010) 
 +26 5V sensor ground bk/w 
 +27 blank 
 +28 power ground bk 
 +29 coil, front be/o 
 +30 crank position sensor (+) r 
 +31 battery be/gy 
 +32 blank 
 +33 vehicle speed sensor input bk/be 
 +34 blank 
 +35 idle air control (A) low be/gn 
 +36 idle air control (B) high bn/r 
 + 
 +TSM/TSSM 
 +1 battery bn/gy 
 +2 ignition gy 
 +3 Serial Data Link lgn/v 
 +4 neutral safety switch tn (formerly security indicator on 2004-2006) 
 +5 left turn output v 
 +6 right turn output bn 
 +7 right turn input w/bn 
 +8 left turn input w/v 
 +9 starter relay control tn/gn 
 +10 clutch control bk/r (formerly ignition enable switch on 2004-2006) 
 +11 alarm signal lgn/bn 
 +12 ground bk 
 + 
 +Speedo (numbers are left-right) 
 +12 blank 
 +11 trip switch bk (to 8) 
 +10 blank 
 +9 fuel y/w (formerly blank on 2004-2006) 
 +8 trip switch (to 11) 
 +7 ground bk 
 +6 accessory o/w 
 +5 battery bn/gy 
 +4 blank (formerly security on 2004-2006) 
 +3 blank 
 +2 Serial Data Link lg/v 
 +1 ignition o 
 + 
 +Tach 
 +1 ignition o 
 +2 Serial Data Link lg/v 
 +3 blank 
 +4 blank 
 +5 battery bn/gy 
 +6 accessory o/w 
 +7 ground bk 
 +8 blank 
 +9 blank 
 +10 blank 
 +11 blank 
 +12 blank 
 + 
 + 
 + 
 +2014-later - Utilizing CANbus communications 
 +https://​www.xlforum.net/​forum/​sportster-motorcycle-forum/​sportster-motorcycle-electrical/​sportster-motorcycle-electrical-and-ignition/​186702-canbus-major-connections?​t=1995444 
 + 
 +(Thanks to schematics supplied by JauntyBishop,​ Sportsterdoc posted this information.) 
 + 
 +ECM-bank one 
 +1. Rear ignition coil gray/blue 
 +2. Front ignition coil green/​blue 
 +3. Front heated oxygen heater ground black/​orange 
 +4. VSS input light green/​yellow 
 +5. Front fuel injector green/​yellow 
 +6. Rear fuel injector gray/​yellow 
 +7. MAP input gray 
 +8. JSS signal light green/​gray 
 +9. ION sensor light green/​brown 
 +10. Sensor ground black/​gray 
 +11. No position 
 +12. No position 
 +13. CAN lo white/​black 
 +14. CAN hi white/red 
 +15. Rear heated oxygen heater ground black/​pink 
 +16. CKP sensor hi red 
 +17. Front heated oxygen sensor green/​brown 
 +18. CKP sensor lo black 
 + 
 +ECM-bank two 
 +1. IAC A hi green/​orange 
 +2. Blank 
 +3. Blank 
 +4. Blank 
 +5. Blank 
 +6. IAT green/​gray 
 +7. 5v sensor ground black/​white 
 +8. ET sensor green 
 +9. 5v sensor power red/white 
 +10. Sensor ground black/​green 
 +11. IAC A lo gray/​orange 
 +12. IAC B hi green/​white 
 +13. IAC B lo gray/​white 
 +14. Blank 
 +15. TPS green/​violet 
 +16. System power red/green 
 +17. 17. Rear heated oxygen sensor gray/​brown 
 +18. Battery fuse red/​orange 
 + 
 +BCM 
 +1. Battery power red 
 +A2. Security antenna hi red 
 +A3. Start enable white/​brown 
 +A4. Security RF antenna black 
 +B2. Security antenna lo black 
 +C3. Ignition switch input white/​blue 
 +C4. Ignition stop switch input white/​gray 
 +D2. CAN hi white/red 
 +D3. Neutral switch input white 
 +E2. CAN lo white/​black 
 +E3. Oil pressure switch input white/​orange 
 +E4. Horn power red/​violet 
 +F3. Brake switch input blue/​green 
 +F4. Fuel pump power red/brown 
 +G4. Sensor ground black/​green 
 +H2. Security Siren white/​green 
 +J2. Front right turn signal blue/​orange 
 +J3. Running light power blue 
 +J4. Front left turn signal blue/pink 
 +K2. Right rear turn signal blue/​brown 
 +K3. Brake lamp power blue/red 
 +K4. Left rear turn signal blue/​violet 
 +L2. Starter solenoid power red/black 
 +L4. Front running/fog lights power red/green 
 +M2. Accessory power red/​yellow 
 +M3. Hi beam power blue/​white 
 +M4. Low beam power blue/​yellow 
 + 
 + 
 +SPEEDO CONNECTIONS (in order from factory schematics) 
 +8. CAN hi white/black from ECM 13 
 +2. CAN lo white/red from ECM 14 
 +4. Hi beam indicator blue/​white 
 +5. Battery red/​orange 
 +6. Neutral indicator white 
 +7. Sensor ground black/​green 
 +1. Oil pressure white/​orange 
 +9. Fuel level white/​yellow 
 +10. Left turn indicator blue pink 
 +12. Right turn indicator blue/​orange 
 + 
 +IGNITION SWITCH 
 +white/blue from BCM C3 
 +black/green to BCM G4 
 +…involving 800 ohm and 200 ohm resistors 
 + 
 +ANTI-THEFT Connections 
 +D black/green sensor ground 
 +C white/black start enable to BCM A3 
 +B blank 
 +A blank 
 +A red/orange power 
 +B white/green signal to BCM H2 
 +C black ground 
 + 
 +Optional - ABS ECU 
 +18 red battery power 
 +14 orange/​brown rear WSS lo 
 +13 orange/pink rear WSS hi 
 +12 orange/blue front WSS hi 
 +11 white/black CAN lo 
 +10 black sensor ground 
 +9 red battery power 
 +4 blue/black switch auxillary lamp power 
 +3 orange/​black front WSS lo 
 +2 white/red CAN hi 
 +1 black/green sensor ground 
 +</​code>​ 
 + 
 +(This section contributed by Sportsterdoc)
  
  

Trace: