Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision | Next revision Both sides next revision | ||
|
techtalk:ref:engctl01 [2019/03/05 18:05] ixl2relax [Aftermarket Ignitions] |
techtalk:ref:engctl01 [2019/03/05 18:08] ixl2relax [Aftermarket Ignitions] |
||
|---|---|---|---|
| Line 10: | Line 10: | ||
| Typical options for Sportster Ignition Configurations (up to 2003): | Typical options for Sportster Ignition Configurations (up to 2003): | ||
| - | 1) Older OEM Ironhead Models | + | **1) Older OEM Ironhead Models**\\ |
| - | - Points to create spark | + | - Points to create spark\\ |
| - | - Mechanical Advance to create an advance curve | + | - Mechanical Advance to create an advance curve\\ |
| - | - Coil is 5.0 ohms to match use with points | + | - Coil is 5.0 ohms to match use with points\\ |
| - | 2) Stock EVO Configuration (Later model Ironheads & EVO up to 2003) | + | **2) Stock EVO Configuration (Later model Ironheads & EVO up to 2003)**\\ |
| - | - Cam Sensor Plate (electronic trigger) - in place of points | + | - Cam Sensor Plate (electronic trigger) - in place of points\\ |
| - | - Ignition Control Module - rearward from battery (or other places) | + | - Ignition Control Module - rearward from battery (or other places)\\ |
| - | - ICM has electronic curves for advance | + | - ICM has electronic curves for advance\\ |
| - | - This module uses a VOES to switch between 2 curves - Vacuum Switch | + | - This module uses a VOES to switch between 2 curves - Vacuum Switch\\ |
| - | - Coil should be 3.0 ohms | + | - Coil should be 3.0 ohms\\ |
| - | 3) Some Only Eliminat Points (older Ironheads) | + | **3) Some Only Eliminate Points (older Ironheads)**\\ |
| - | - Electronic Trigger - Dyna S - DS6-1 model | + | - Electronic Trigger - Dyna S - DS6-1 model\\ |
| - | - Mechanical Advance is still used for advance curve | + | - Mechanical Advance is still used for advance curve\\ |
| - | - Coil can be OEM 5.0 ohm | + | - Coil can be OEM 5.0 ohm\\ |
| - | 4) Eliminate Points & Mech Advance (and/or stock external ICM) | + | **4) Eliminate Points & Mech Advance (and/or stock external ICM)**\\ |
| - | - Electronic Ignition Module - Ultima 53-644 - In nosecone | + | - Electronic Ignition Module - Ultima 53-644 - In nosecone\\ |
| - | - This module includes electronic curves for spark advance | + | - This module includes electronic curves for spark advance\\ |
| - | - This module uses a VOES to switch curves - Vacuum Switch | + | - This module uses a VOES to switch curves - Vacuum Switch\\ |
| - | - Coil is 3.0 ohms | + | - Coil is 3.0 ohms\\ |
| The 2004-later models all implemented the Crank Position Sensor which eliminated the Cam Sensor Plate. | The 2004-later models all implemented the Crank Position Sensor which eliminated the Cam Sensor Plate. | ||
| + | |||
| + | The 2007-later models use Electronic Fuel Injection with a more complex ignition system. | ||
| + | |||
| \\ | \\ | ||
