Differences

This shows you the differences between two versions of the page.

--- techtalk:ref:engctl01 [2020/03/06 05:37]
hippysmack [Why Adjust The Spark Timing?]
+++ techtalk:ref:engctl01 [2020/04/12 17:54]
ixl2relax [Ultima - Nosecone Ignition]
@@ Line 177: / Line 177: @@
 These nosecone units can be installed in pre-2004 model Sportsters, including those which originally had mechanical points, external ECMs with a Cam Sensor Plate and those models (1998-2003) which had an OEM nosecone ignition.
-The Ultima unit triggers the coil primary circuit - either as a dual-fire system (one trigger) or a single-fire system (two trigger signals). It also has an output for a tachometer and also has an input for using a VOES to alter the spark timing during idle & cruising.
+**NOTE** - The module expects to see 3-ohm primary coil resistance (2.5-3.5) for any of the configurations.
+The Ultima unit triggers the coil primary circuit - either as a dual-fire system (one trigger) or a single-fire system (two trigger signals). It also has an output for a tachometer and it has an input for using a VOES (which is recommended) to alter the spark timing during idle & cruising.
 The install instructions are here: Ultima 53-644 [[http://www.ultimaproducts.com/53-644_Ignition.pdf|Installation Instructions (2012 version)]]\\
-{{:techtalk:ref:engctl:ultima-53-644-ignition-module.jpg?400|}}((Pics by Blowby & Static of the XLForum.net))
+{{:techtalk:ref:engctl:ultima-53-644-ignition-module.jpg?400|}}((Pics by Blowby & Static of the XLForum.net)){{:techtalk:ref:engctl:ultima-53-644-wiring-df.jpg?300|}}{{:techtalk:ref:engctl:ultima-53-644-wiring-sf.jpg?300|}}
 See this thread: http://xlforum.net/forums/showthread.php?t=1747557
@@ Line 188: / Line 190: @@
-===== Programming the Ultima, Dyna & Dynatek Modules =====
+==== Programming the Ultima, Dyna & Dynatek Modules ====
 These links should be instructive:
@@ Line 285: / Line 287: @@
 {{:techtalk:ref:engctl:thunderheart-ea4250d-startbutton.jpg?500|}}((Created by IXL2Relax of the XLForum))
+\\
+===== Motogadget M-Unit Blue =====
+\\
+This unit is designed to replace the power control device on your motocycle. It does not provide engine spark or timing, so you must supply (or keep) that part of the motor control devices (points & mech advance or ignition module & timing sensor, coil, etc). Their main website is https://motogadget.com
+The m-unit operation (and the manual) is updated regularly so it is important to know which version you have to know what functions are programmable. The manuals are not dated, so pay attention to the version & S/N references.
+Take note that most input switch connections are expected to activate the signal by grounding the input. This may not be the way the stock switches are configured.
+Document Links:\\
+https://motogadget.com/shop/media/downloads/manual/munit_blue_manual_1.8_en.pdf\\
+https://motogadget.com/shop/media/downloads/manual/munit_blue_manual_en_2.0.pdf\\
+https://motogadget.com/shop/media/downloads/manual/munit_basic_blue_manual_en_2.1.pdf\\
+https://motogadget.com/shop/media/downloads/manual/munit_basic_blue_manual_en_2.2.pdf\\
+https://motogadget.com/shop/media/downloads/manual/mo.unit_basic_blue_manual_en_2.4.pdf\\
+Revival Cycles' has done a number of YouTube videos (called Tech Talk) and has some
+documentation as well.\\
+https://technicalarticles.revivalcycles.com/hc/en-us/categories/360000739551-Motogadget\\
+The Ins and Outs of the Motogadget M-Unit Blue (21:13min)\\
+https://www.youtube.com/watch?v=899wODtXeRg\\
+This diagram may or may not be like your setup (may not be helpful):\\
+https://revivalcycles.zendesk.com/hc/en-us/article_attachments/360012382451/universal_m-unit_blue_diagram_5.0_.pdf\\
+Using Your Phone to Connect to the m-unit:\\
+https://www.mo-ride.de/en/\\

Trace:

Differences

Navigation

Search

Toolbox