Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
techtalk:ref:engmech01c [2018/06/28 02:31]
hippysmack [Choose your tool for measuring TDC]
techtalk:ref:engmech01c [2018/07/23 02:56] (current)
hippysmack [Making Your Own TDC Mark in the Crankshaft (03 and prior engines)]
Line 1: Line 1:
 [[:​techtalk:​menu|{{ ​ :​techtalk:​gototechnicalmenu.jpg|}}]] [[:​techtalk:​menu|{{ ​ :​techtalk:​gototechnicalmenu.jpg|}}]]
 ====== REF: Engine Mechanicals - Sub-01C ====== ====== REF: Engine Mechanicals - Sub-01C ======
-====== Making Your Own TDC Mark in the Crankshaft ​(03 and prior engines) ======+====== Making Your Own TDC Mark on the Flywheel ​(03 and prior engines) ======
  
   * When upgrading a 2003 or earlier engine with a 2004 and up crankshaft, you'll need to create your own timing mark as these will not have one. Base timing on 04 and up is set in the programmable Engine Control Module (ECM) using a CKP Sensor at the flywheel teeth.   * When upgrading a 2003 or earlier engine with a 2004 and up crankshaft, you'll need to create your own timing mark as these will not have one. Base timing on 04 and up is set in the programmable Engine Control Module (ECM) using a CKP Sensor at the flywheel teeth.