Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision | Next revision Both sides next revision | ||
|
techtalk:ref:engmech01i [2018/08/12 03:16] hippysmack [Installing Inner Cam Bushings (in the gear case)] |
techtalk:ref:engmech01i [2018/08/12 03:17] hippysmack [Installing Inner Cam Bushings (in the gear case)] |
||
|---|---|---|---|
| Line 7: | Line 7: | ||
| Bushings are press fitted into the case. A press fit translates to the O.D. of the bushing being the same as the I.D. of the case bore (for practical purposes here). \\ | Bushings are press fitted into the case. A press fit translates to the O.D. of the bushing being the same as the I.D. of the case bore (for practical purposes here). \\ | ||
| When a new bushing is pressed into the case bore, it's I.D is compressed and becomes distorted somewhat. \\ | When a new bushing is pressed into the case bore, it's I.D is compressed and becomes distorted somewhat. \\ | ||
| - | The bushing in the gearcase is then reamed to the correct size and alignment to the cover bushings. | + | The bushing in the gearcase is then reamed to the correct size and alignment to the cover bushing. |
