Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
techtalk:ref:engmech01n [2022/03/14 21:48]
hippysmack [History] 		techtalk:ref:engmech01n [2022/03/14 22:36] (current)
hippysmack [History]
Line 2: Line 2:
 ====== REF: Engine Mechanicals - Sub-01N ====== ====== REF: Engine Mechanicals - Sub-01N ======
 ====== Cam Cover Gasket Compatibility ====== ====== Cam Cover Gasket Compatibility ======
-====== ​Ironhead ​Cam Cover Gaskets ====== +\\ 
-===== 1952-1976 K and Sportsters ​===== +====== ​1957-1985 ​Cam Cover Gaskets ====== 
-==== History ​====+===== History ​=====
 **Gaskets**:​ \\ **Gaskets**:​ \\
 **1952-1976 models** originally used OEM gasket 25224-52 until 1977 when the 25224-52A came out and replaced the -52 gasket back to 1952. \\ **1952-1976 models** originally used OEM gasket 25224-52 until 1977 when the 25224-52A came out and replaced the -52 gasket back to 1952. \\
Line 25: Line 25:
  
 ===== Gaskets ===== ===== Gaskets =====
-**Note**: Make sure before using a NOS -52A gasket (on L1979-1981) engines that it has the elongated ​slot. \\ +**Note**: ​\\ 
 +Make sure before using a NOS -52A gasket (on L1979-1981) engines that it has the long slanted ​slot. \\
  
   * 1957-E1982 right cases with the small boss and __oil slot__ use gasket (25224-52A). \\ 57-E79 models can still use gasket 25224-52 with the hole in the upper center and these can be found online. \\ L79-81 models must use the 25224-52A gasket with the long slanted slot.   * 1957-E1982 right cases with the small boss and __oil slot__ use gasket (25224-52A). \\ 57-E79 models can still use gasket 25224-52 with the hole in the upper center and these can be found online. \\ L79-81 models must use the 25224-52A gasket with the long slanted slot.
-  * L1981-1985 right cases with the large boss and __oil hole__ use gasket (25263-81). \\ These models must use gasket 25263-81 with the long horizontal slot.+  * L1981-1985 right cases with the large boss and __horizontal oil hole__ use gasket (25263-81). \\ These models must use gasket 25263-81 with the long horizontal slot.
  
  

Trace: